cut

  1. shop tree

    shop tree

    shop tree
    • Phil S
    • Media item
    • be cut to tree
    • Comments: 0
    • Category: Member Galleries
  2. H

    Chatter with bowl gouge? Inside roughing cut

    All: A relatively novice turner here - at least as far as bowls go. I likely have more "spare" pen parts than most of you, as least as a ratio with the number of pens I have completed (5?). I am trying my hand at some maple bowls with a natural edge. One piece is about 10" in diameter and...
    • Henry W
    • Thread
    • bowl chatter cut gouge inside roughing
    • Replies: 20
    • Forum: Woodturning
  3. WoodWrangler

    How do you cut a 4-Way Taper Leg

    I've cut a two-way taper leg, but now I'm need of a four-way taper. Any tips or suggestions on how to pull this off safely?
  4. CarvedTones

    pear, birch and maple to be cut down in Cary/Apex

    It's a CL ad for free stuff. Someone taking trees down Feb 6th/7th. I don't have a gas chain saw, so I can't really call and offer to do much. But I may be able to come help if someone in interested. http://raleigh.craigslist.org/zip/1568424224.html If you can do it, I would urge a quick...
    • CarvedTones
    • Thread
    • birch cary or apex cut maple pear
    • Replies: 0
    • Forum: Wood
  5. PeteM

    How would you cut these? (Safely)

    http://www.etsy.com/shop/zenblocks p
  6. W

    Sliding cross cut TS attachments

    I'm kinda sorta thinking about getting a sliding cross cut attachment for my Unisaw. Anyone out there have one?Worth the price? How does it work,how hard to attach etc. I have never talked to anyone who has one and appreciate any comments. Thanks.
  7. Chris's Crosscut Sled

    Chris's Crosscut Sled

    Cross-cut sled based on design from ShopNotes #99. More pictures at http://christophermerrill.net/ww/shop/CrosscutSled.html
    • merrill77
    • Media item
    • cross cut sled
    • Comments: 0
    • Category: Member Galleries
  8. T

    How to cut Diamond Plate

    What do you use to cut Aluminum Diamond Plate (Tread Plate)? I saw on TV where they used a circular saw. Do you need a special metal cutting blade?
  9. W

    Cross cut sled

    Need to build newer and bigger xcut sled. What do y'all think: fence in the fron or reqr of the sled; what is "ideal " size of the base; one runner or two? Am cutting panels about 20x20 on Unisaw with outfeed table and extra support to the left of the saw. Qny input greatly appreciated.
  10. I

    How do you cut an oak burl?

    I have a huge oak burl. I watched it grow for almost 40yrs. Last spring we had to cut the tree. The burl is about 10' circumfrence. I am not a woodworker. I am a fish taxidermist. I would love to get some slabs from it to use in my business. How do I cut it? I have a friend with a 3' chainsaw...
  11. C

    Flitch Cut Cherry Eye Candy

    Hello all, Here is a little something to droolllll OVER.:tinysmile_tongue_t:.... Veener Quality Flitch Cut Cherry.....125" Boards cut into 5/4 with 8/4 wrapped Heart for legs or post.....Waxed, Banded, and stickered going into the kiln soon. I believe we might have to keep this...
  12. Sharp Blade

    Measure Once, Cut Right Through...

    EVERYTHING! I am such a dolt. I had put the piece on top of my tablesaw in order to mark it and make the cut. I don't have my ususal limited space anymore, I now have much LESS!! Anyway, to cut :wink_smil...er...make a long story short...I forgot to move the board to a safer location, such as...
  13. AmishWarlord

    Control Cut on Craftssman Radial Arm Saw

    When I pull the trigger on the handle I can hear the motor turning but the saw is not moving. The carriage lock is free and the saw can be moved back and forth but the control cut is not engaging. I can't find any info on this in the owners manual. Is there a switch or knob I'm missing?
  14. CarvedTones

    Pear tree cut up in Durham

    I wish I could make it over to get a section of the trunk, but have too much going on today... http://raleigh.craigslist.org/zip/1401022520.html limbs/wood (Durham, east) Date: 2009-10-01, 9:07AM EDT Reply to: sale-wxxkc-1401022520@craigslist.org [Errors when replying to ads?] I'm...
    • CarvedTones
    • Thread
    • cut durham pear tree
    • Replies: 0
    • Forum: Wood
  15. K

    Sheet Goods 'Cut Layout'

    I might be dreaming but there's got to be some free software out there that lets me view a 4' x 8' sheet and lay out the best cuts for the project I'm building. I use Sketchup and their plugin 'Cutlist' but I'd like to be able to figure the best cuts a sheet. I can develop my own system but why...
  16. H

    Cherry Logs/Curly Maple Logs Cut To Order

    I have about 400' of Cherry logs 12"-14" on the small end will cut to order. Also have about 200' of curly maple logs that we can cut to order. If there is any interest out there give me a call. Roy
    • hroykelly
    • Thread
    • cherry cut logs logs or curly maple order
    • Replies: 0
    • Forum: Wood
  17. M

    How to make this cut?

    One of the reasons I recently got into woodworking is to make some of my own beekeeping equipment. The hive bodies and supers are one of the things I'd like to make , the one thing that I'm not sure about are the handles. The image below depicts what I need to do. This type of cut is what I...
  18. CarvedTones

    Treating big fresh cut carving blanks

    So I got these: I have since put parafin on the ends. I assume I should debark (?). I am hoping to carve musical instruments out of these, so I want to try really hard to keep them from cracking. I know it may be a couple of years before I carve them.
  19. CarvedTones

    URGENT - turner in Apex/Cary/Raleigh that can cut up some blanks

    I picked up some free cherry and I am willing to give up the lion's share, including a nice burl and a crotch, to someone who will take it and cut me a couple of large carving blanks. I have the aforementioned burl, crotch, a big round and a couple of small logs (maybe 10") about 6' long. I will...
    • CarvedTones
    • Thread
    • apex or cary or raleigh blanks cut turner urgent
    • Replies: 6
    • Forum: Woodturning
  20. B

    The last cut and bang!

    I was taking a final light trim cut on the inside of the bowl to just smooth it out before sanding and it went bang! I know I did not cut through the side and the tool was not removing much wood. I was using a Ci0 Easy Finisher when this happened and I did not feel it catch. Any thoughts on...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top