wip

  1. dancam

    Morris Chair - WIP

    Well I finally got the construction phase completed and I'm now ready for the finishing. I'm going to farm out the leather upholstery to a professional. The chair is constructed of QSWO and the design is a combination of the FWW plan and the Woodsmith plan. I also built an Ottoman (again a...
  2. Trent Mason

    Ash Coffee Table WIP (pics) FINISHED!

    I just started the coffee table that I would like to have have to have finished by Friday. Just wanted to post some WIP pics of it. I definitely learned a few lessons tonight. First, IT IS A LOT EASIER TO CUT A STRAIGHT EDGE WHEN YOU HAVE A STRAIGHT EDGE...
  3. MT native

    WIP - Homemade Foredom Relief Carving Jig

    INTRODUCTION I carve in-the-round. Now I want to do relief carving, with power tools. All of my web-based research repeatedly mentions the use of a router to ‘hog out’ the background wood in relief carvings. I do not own a router. I do not own a Dremel nor its plunge router base. The Foredom...
    • MT native
    • Thread
    • carving foredom homemade jig relief wip
    • Replies: 31
    • Forum: Woodcarving
  4. Hook

    Reducing WIP

    Work in Process is dropping slightly: Bless our home was Stack Cut, Tom Zeig pattern The 3rd (and for awhile, the last) P-40
  5. Larry Rose

    Cypress Bench Dry Fit WIP

    This is the result of my last few days in the shop. Now I got to take it apart and start sanding. I will use a marine grade varnish to finish . It goes to the local Garden Club for thier fund raising auction. More when finished.
  6. ashley_phil

    Pirate Chest WIP

    So JOAT posted this thread the other day in honor of the National Speak Like a Pirate Day, or maybe it was just a coincidence. Eitherway this was a good idea and my 3yr old is going to be a pirate for Halloween. So I figured, I might as well make him a treasure chest...
  7. T

    Cabinet commission **FINISHED* (UPDATED)

    This kitchen cabinet is a commission piece. It is an odd sized piece to fit in an area to maximize space. It is going right next to a refrigerator and against a wall. The basic dimensions are 66"h x 27"d x 14"w. It will be sprayed a satin white. The materials are MDF, poplar and tempered...
    • toolferone
    • Thread
    • cabinet commission finished pics updated wip
    • Replies: 26
    • Forum: General Woodworking
  8. ScottM

    Welcome Sign WIP

    I normally don't post my WIP but this is the first cutting off my new Hawk. I have had this pattern for a while (it was purchased) but at 36" it was to long for my Dewalt to handle nicely. The wood is 3/4 western cedar. I am tempted to just apply BLO followed by a couple coats of satin poly...
  9. S

    Inlay table still a WIP

    I've decided that I need to start working again so I'll have time for woodworking. I'm sure all you retirees know what I mean. Anyway, I just finished shaping the table legs. Now to finish sanding, staining, assembly, poly, . . . . . so much to do, so little time. I think there's a table...
  10. Larry Rose

    Wip Cypress Deck Table

    It has finally cooled down enough for me to do some shop work so I started this table to be used on the deck at our beach house. Maybe I can actually set down a cool beverage once in a while now:rotflm: The top is two rings that sandwitch the slats in place. The bottom will have stretchers and...
  11. welldigger

    WIP TV Stand progress

    Got the mitered/beveled molding and base on yesterday. Didn't get much shop time today because I had to dry out my truck. (I left a window down yesterday evening and let 2.68" of rain...
  12. welldigger

    WIP TV Stand

    Got a new 52" LCD TV a couple of weeks ago and had to build a stand for it. Installed face frame and side molding last weekend. Case is oak ply, side molding is "raised panel". Ran 3/8" oak for rail and stile on...
  13. WoodWrangler

    Play Table for my kids (WIP)

    Well, I started this over a month ago but it has sat idle since then ... until this past weekend. I started working on it again. It's main made with scraps found around the shop -- white oak, brazillian cherry, hickory (and who knows what else I'll use). In the end it will be a table for my...
  14. Larry Rose

    WIP: Headboard

    Although it seems that all I can do is make tables, this is proof that I will do other work when asked:gar-La;. A friend wanted this headboard built but unfortunately he just wanted it in pine. Oh well, he's the boss. More to follow.
  15. pslamp32

    Sockdresser? WIP...

    So I had a leftover tabletop from my last project so I decided to kick out a little project this weekend. I call it a sockdresser 'cuz I don't know what they're called actually. I'm just waiting for some cool euro knobs and pulls to arrive from Rockler. I'm really starting to get the hang of my...
  16. bman

    another norm router table WIP

    well guys been working on the new deluxe NYWS router station used old bench material recycled for most of the case (bigger is not always better i found out) the old bench was too high ,to wide ,the draws were to big it is gone now and rising from the ashes (like the Phoenix) comes the router...
  17. dino drosas

    WIP - May's project UPDATE

    I have decided to replace the built in vanity in my downstairs bathroom with a piece of furniture-like vanity with sink. I got a good start the last two days with lots of shop time. The case is made from solid cherry with 1/2" cherry plywood side panels. The top will be 1" thick black granite...
  18. J

    Doll Cradle WIP

    #1 Grand Daughter's doll cradle. Plan called for cherry, but don't have any... so I just used some old nasty birdseye ambrosia maple instead. Didn't have time to finish sanding or put a finish on, going to finish it with spray polycrylic. http://woodstore.net/sweetdolcrad.html As for the...
  19. dino drosas

    WIP - occasional table

    I started this table a few days ago. Don't ask what the species of wood is. Your guess is as good as mine. It is very dense, very dusty, and brittle. Cut one leg too short so I decided to go with three instead of four.:dontknow:
  20. Larry Rose

    WIP Pedestal Table

    I've been working on this table for a few days now. This one will be auctioned off for a fund raiser at a local school. It's simular to one I built last year that didn't turn out like I wanted so I made a few changes. It is mahogony and zebrawood veneer. More to follow.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top