wip

  1. Larry Rose

    Moving day WIP

    I finally started moving into my new shop addition yesterday. As you can see I didn't get very far because the AC isn't in yet. I did get the heavy stuff in with the help of three other guys ( the bench, the tool cabinet and the lathe although I'm not sure I really want it in there). I still...
  2. MikeH

    Workbench base WIP - COMPLETED!

    As some of you may remember I bought a Maple pattern makers bench top from Tarhead a while back. I am now in the process of making a base for the top. I have most of the wood cut and it's time to start gluing. I am using the Black Walnut and Maple that I got from Jeff. Everything will be mortise...
  3. Larry Rose

    WIP outside finished

    After weeks of struggle we've finished the outside of my new shop addition:eusa_clap Well almost.....I've still got to build steps on the front of the porch. The inside is progressing also. Maybe it will be finished in 2-3 weeks.
  4. John Reeves

    Stools WIP

    I am using the design in a mag. to make some stools for LOML. These will replace the 5 kitchen chairs I have broken. I am also on a diet!
  5. sediener

    Bookcase WIP

    So after completing this workcart as my first project (it was from the shopnotes plan with a few minor mods), I decided that I should start on something that will go in the house. and this is a rough sketchup plan: here is where I am so far (the left section is out of the pic). I should...
  6. DaveO

    End tables WIP, this weekends efforts

    My wife decided that we needed a new couch after my daughter got sick on the old one. That new couch is too tall for the original end tables I made a few years ago. So my current project is a set of new end tables. I have some QS Sycamore from Jeff, just enough for the tops, and a bunch of Black...
  7. DavidF

    Commissioned dining table WIP

    Just a reminder. The picture is in Isometric with no perspective added to show the top design. . The QSWO was bought about 4 weeks ago from the hardwood store and was left for a week in the shop on a rack. I partially milled the pieces to just remove the "skin" and let them breath a little...
  8. pslamp32

    Modern sideboard WIP....

    I thought I'd post a picture of my latest project. It's a contemporary sideboard made of Sapele, my newest love. I'll be building some steel, 6" tall legs, similar to the legs from my last 2 tables... http://www.ncwoodworker.net/forums/showthread.php?t=7810 . The frames in the bottom will...
  9. erasmussen

    WIP sander

    I wanted a disk sander, my bank said no ( Okusan Ginkou )*. So i decided to just make one, I wanted a large one but thinking about my space limitations I am making it small 10". I have some arbors, with good ball bearings and a few motors and some 3/4 ply so heres what I got done so far...
  10. Jon

    Cherry Cabinet WIP

    I Started this on Friday afternoon and got it to this point by Sunday night. It has a few splotchy places but over all I am pleased. I still have doors to make for the top opening and an upper Hutch. It is Cherry Just in case. Oh ANd Im going to do wipe on poly.
  11. johnpipe108

    Woodwind prototype made in MDF; WIP

    My Irish Uilleann pipes, which I made in 1983 of Mexican Rosewood and brass, are currently what is called a "half-set": which means they have a chanter (melody pipe) and drones (steady bass), but do not have what are called "regulators", closed keyed pipes that provide rythmic accompaniment...
  12. DaveO

    Newest WIP, design opinions wanted-Mo' Pics

    I've been given a little grief by a couple members because I haven't shown any projects in the last couple of weeks. That is because I have been working on this. I started it last weekend and unfortunitely didn't get as far as I hope to be able to post any good pics. Today I completed the last...
  13. M

    Unique Countertop Commission - WIP w/ pics

    I have been asked by friends of the people for whom I built the Wine Cellar Project last October (see pics in my Photo Gallery) to build a special Countertop/Bar in their new home under construction in the suburbs of Hendersonville. Last month, I picked up the materials from Steve Wall Lumber --...
    • McRabbet
    • Thread
    • commission countertop pics unique w or wip
    • Replies: 30
    • Forum: General Woodworking
  14. Gofor

    Another Wrk Bnch WIP

    I also have a bench in progress and would like some advice. Here's a couple pics and more are in my gallery: Started with these raw materials (SYP 2x8s for the base and 8/4 white oak for the top); Then I flattened, jointed, etc and milled the raw stuff: and And am now to this point ...
  15. mshel

    WIP auction table

    Here are a couple of pics of the table I am presently making which will be an auction item in an upcoming event in which all proceeds go to underpriviledge children. It is made entirely of Mahogany with maple inlay and maple / walnut inlay on the bottom of the legs. This is just a dry fit. I...
  16. DaveO

    Cat bed WIP

    As a project to review the Bowclamp cauls system, my wife suggested that I make a bed for one of our cats, Pickles. Here is what I came up with: It's Lacewood for the back, with a hard Maple inlayed "P" (for Pickles :roll: ) with QS and riff sawn Red Oak for the legs and rails. I bet...
  17. T

    New router top (wip pics)

    I posted last week about the new router lift I got. Well. I had to make a new top for my router cabinet. Here it is so far. The new top is 2 layers of MDF edge banded in oak and laminated top and bottom. It is 25"d x 32"w x 1.5"t. The front has a miter track and a T-track. The 2 gold Incra...
  18. mkepke

    WIP - Built-in bookshelf

    WIP - a built-in bookshelf. This replaces a studs-and-drywall halfwall overlooking the foyer. Still have some touchup painting left and the top to install. On reflection, I should have made it a little narrower as it feels like it crowds the hallway a bit. :eusa_doh: -Mark Back of...
  19. DaveO

    Wife's Xmas present WIP

    I got started Saturday morning on the construction of my wife's requested Xmas present, a kitchen hutch to store her ever growing collection of pots and pans. I started with a sketch of my ideas: Figured out the materials I needed. Headed out to get Poplar stock for the face frames and...
  20. J

    #4 son's bed WIP

    Ok next project up on the chopping block, whats your thoughts on this design? seemd pretty straight forward. Someome mentioned something about making the legs out of 45 deg miters instead of a solid lam glue up. I think that might work well on this one. Anyways whats your Honest thought's? does...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top