small

  1. Mark Gottesman

    Small Package from Cary to Winston-Salem/Clemmons

    Need to see if I can get a small box from Cary to West Winston Salem (Peacehaven/421 are). PM me for details. thanks Mark
  2. Mark Stewart

    Small cnc carver???

    Do any of you possess one of those small cnc carvers you know like the one Sears sells for 2G's I ask cause this guy I work for wants an ingraving of his Military Patch from active duty I was hoping to find someone here to do it for him. Thanks Mark
  3. Mark Stewart

    Small Gloat of free wood

    Today while I had slipped away to the local grocery store I returned home to find this wonderful surprize. The local Wood Fairy had paid me a visit and has left me a wonderful gife of about 20-30 bf of this Brazillian Iron wood. Its nice to have friends. Sorry the pics are bad lost...
  4. steviegwood

    Small Book Shelves

    Hi Y'all, here are a couple of small book shelves that I have completed for my great nieces and nephews. These make numbers 5 & 6. I made 4 for Christmas and these are for upcoming birthdays and are intended for their collections of small children books. Made from solid 5/8" maple approx. 31"h x...
  5. Ken Massingale

    A Small Wood Gloat

    We buy a load of logs every other year for firewood, this year I specified White Oak and Cherry. As a rule this stuff would go to the chipper. Usually I get some usable cuts for turning and short boards. Here's half the load cut up (a bud bought the other half). A few of the Cherry shorts...
  6. ErnieM

    Need small clamps?

    Hi all, Just received an order of 50 small spring clamps from a company called Micro-Mark. The clamps are terrific - the jaws even swivel. I ordered from this company before and their offerings are unusual, clever, and inexpensive. I paid $19.95 for these beauties. If you could use some click...
  7. K

    Miter Saw small cutting Jig.

    I have been wanting a better way to cut pieces on my SCMS. I want to do some segmented bowls and wanted to be able to cut the entire board into segments without risking my fingers. From the picture... The lever holds everything in place. The back pieces slide so I can have back support and just...
  8. flatheadfisher

    Veritas® Small Plow Plane

    Does anybody have one of these Veritas® Small Plow Plane? I have been thinking about getting one but just can't hit the button. The reviews have been good but I sure would like to see one first hand. Any comments would be appreciated.
  9. CarvedTones

    Small Sorby Spindle Master gloat

    Here 'tis: I think this will be a good choice for turning tuning pins and end pins; better than my full length 1/2" skew, though the skew is still my weapon of choice for initial rounding. Attempts at beads improved from awful to reasonably okay within a couple of minutes. Sharpening it...
  10. flatheadfisher

    Finally, A Small Project & Saw Question

    My first four projects were pretty large and I am excited about starting a smaller project that I can finish in a couple of days. I saw the thread about cutting boards and link to a Woodwhisperer video and thought I'd give it a try. I want to make some butcher block counter tops for our...
  11. flyrod444

    small HF tools

    Here is a picture of a HF tool I made using a long 7/32" allen wrench. It works great on Christmas ornaments and hickory nut HF's. It is only good around 1 1/2" of the rest and then it starts to flex, but for getting the ball of an ornament thin under the rim it is perfect. I heated it with a...
  12. redhawknc1

    Small Smoothing Plane Till almost Finished...

    Well, still a newbie at this woodworking hobby, but having fun. Building some shop furniture outa the cherry I have in my stash. Had a lot of waste, but the wood was priced right when purchased. Figured shop furniture would be a good way to teach myself some basics. And no one is hardly ever in...
  13. farmerbw

    Finished a small and "simple" project

    Once again LOML volunteered us for something and I had to whip it together in pretty short notice, like 3 or 4 days. :elvis: This time it was to make a craft/scrapbooking caddy for our son's preschool fundraiser. I've never built one so I kinda just rough sketched something out and whipped it...
  14. flatheadfisher

    A Good Day - With a Small Bummer

    My brother bought a new house - he was happy to move out of his condo. This is especially true since his little boy is four years old and loves to play outside. I went to his house and helped him build one of those wooden swing set / play house things. I took my air compressor and lots of...
  15. woodguy1975

    Small Gloat: It's official... Woodguy is Back!!!!!

    Ok, after being repressed for nearly 2 years the original Woodguy's disease has flared up. :) You guys probably saw the post about the Meber 24". I was the other buyer for the saw. I went and took a look at it and discussed it with my fiance and the saw is now mine. :) We are moving it...
  16. jimwill48

    Small Tool Gloat

    Was in Lowe's in Mooresville this weekend and spotted on a discount table a NIB Freud JS100A biscuit jointer marked $56. thought it was a pretty good price and gave me a chance to upgrade from my Ryobi. At the checkout it got better, price came up $43.00. Left happy! :tool: Was in the new...
  17. NCTurner

    small gloat my first ever....

    Finished my first ever "major" project a 99" workbench, 3/8 osb top and 3/4" MDF shelf(for weight and because it was free.) Will get some pics posted tomorrow. I must say I am pretty pleased. Had some tool issues(need them), and forgot the old adage measure twice cut once, but otherwise not bad...
  18. DavidF

    small ALARM clock to make clock

    Hi All, I am interested in making a couple of bedside alarm clocks as I can't seem to find one I like and need a pointer to some small ALARM clocks, say 2" dia that I can mount in my own frame/case. Analogue or Digital. TIA for any advice.
  19. T

    Two small tool gloats (pic)

    Well I should be posting in 2 different forums but I don't think anyone will mind. I was in Myrtle Beach last week and found the PC stapler in a pawn shop for $35.00, but that wasn't cheap enough for me so I offered him $30 and he said okay. It is brand new in the box and new it sells for...
  20. bluewing92

    A few small things and a Pizza Peel

    Finally got around to taking a few picture of what I have been doing for last few weeks. The Pizza Peel (maple and Cherry with mineral oil finish) is for my SIL who is a great cook by trade but this is for the house. I get the first piece when he brakes it in.:gar-Bi The small turnings are all...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top