small

  1. WoodWrangler

    Small Gloat & Good Deal

    Picked up the Brad Point Drill Bit Set from WC today for $29.99 ... which seems like a great deal. A decent case, and the bits look good too :eek: http://woodcraft.com/family.aspx?familyid=20268 Anyone have this set? Good deal, or was I a sucker?
  2. b4man

    Small gloat

    While I was out of town this weekend my new baby Colt router arrived. Today I couldn't wait to get out in the shop and play with it. Thanks to all who advised me on this router! I don't know how I ever managed round over's without it. The Warner bases haven't come yet and I know I'll enjoy them...
  3. G

    Small chest done

    I finally got around to posting (well, taking then posting:eusa_doh:) pictures of the small chest I made last year. I made it out of Cherry and Poplar I got from Kyle (it's all solid, no plywood). I used Moser's dye stain to even out the color and blend in some mineral stains in the wood...
  4. quid_non

    How to make small, perfectly round circles?

    Hi All! I'm trying to repair some goofs I made when installing euro hinges in some oak cabinet doors. Issue is I need to "plug" the 1 3/8" hole I put in the wrong side. Any ideas on how to cut a perfectly round 1 3/8" "oak plug"? I don't have a scrool saw, but do have a band saw. I thought...
  5. CarvedTones

    small pieces of thick steel plate

    I need a couple of small pieces of 1.25" or so thick steel plate. By small I mean really smalll - 3" x 2" and 2" x 2". They need dead flat parallel faces. EDIT - Oh yeah - Cary/Apex/Raleigh area.
  6. owen299

    Walnut plate / small bowl

    I thought I would take a shot at the new process for adding a photo:icon_scra. The plate is 13 inches and the bowl is from a scrap cut-off
  7. PeteM

    Small projects for LOML

    The frame is ambrosia maple and the pegs are paduk. I made the pegs on the router table with a roundover bit. Finish is Waterlox. The other things are just some accessories she "designed and commissioned" :eusa_danc pete
  8. Jon

    Which small lathe to get

    I would like to make some pens and maybe some small bowls. I dont want a tiny lathe but not a huge one either. could you guys and gals give me some advice on what to get.?
  9. Pop

    Small shop ... big hopes

    After she bought me the two Model A trucks six years ago, my wife then said I should get a building to do the work and store the truck in when it's done. Not being one to go against my wife when she has such a great idea, I went and looked at pre-made buildings. I came up with a 14 x 20 building...
  10. Douglas Robinson

    Bargain alert. Anyone need a small air compressor?

    Reporting this from another forum; "Anyone need a small air compressor? HD is evidently closing out their 2 1/2 gallon dual stainless steel tank oiless unit for 49.00! 1.9 cfm at 90 psi, so it is a small unit. Has a pressure guage for the tank pressure, and another one for the output. Two hose...
  11. ebarr

    Small Gloat

    OK, I have been looking for somewhere to put all my pen/game call kits, blanks, and all my other parts and pieces. Everything I looked for was cheap and plastic, or expensive and what I wanted. Today I landed a free Plumbing parts bin they were getting rid of at work. It is brand new out of...
  12. SSuther

    Small Walnut Chest

    Thought I'd show you my latest in a short list of projects. This is a small walnut chest I designed to sit beside my easy chair. My wife had been fussing about the crummy looking table/magazine rack we'd been using, so I had to do something! The wood is old air dryed walnut that I got out of my...
  13. Bas

    Sweating the small stuff

    When we talk about spending money on tools, it's typically the "big four" (table saw, band saw, jointer, planer). But it's the "small thousand" that's killing me! Here's a short list of everything I've purchased in the last six months to set up shop. Bear in mind that this does NOT include...
  14. kota62

    Small Computer Desk

    LOML wanted a new Computer Desk, so we came up with this design The top is 36" X 20" Breadboarded solid Cherry Sanded to 220 grit, then Watco Danish Oil Cherry, several coats of waterbased poly, wet sanded to 600 grit, waxed and buffed Ralph came up with the idea of the lifting top...
  15. Canuck

    Small Deck Table

    Last weekend, we delivered a pair of Adirondack chairs to my daughter and son-in-law. Once set up on their deck, she said .... "dad, a small table to set our drinks on certainly would be nice":BangHead: Oh well.... Today I whipped up a small table. About 16" x 24" at about the height of her...
  16. H

    Getting into the small spaces...

    I've been working on a pretty simple relief carving of a flower and the space between the petals are almost nill. I've been using a carving knife with a sharp point to nudge the stock out between these petals, but man is it tedious. Is there a simpler way or is this about it as far as options on...
  17. johnpipe108

    How to correct for blade drift on small band saw?

    I've purchased my first band saw, a Craftsman 10" 2-wheeler, and looked for info on correcting for blade drift (after I found out there was such a thing, when I took a closer look at the second pieces I had cut, using the fence, and saw that they were tapered!). However, all I have found seems...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top