small

  1. CarvedTones

    small catalpa HF

    Could be more hollow and better formed and it has no finish yet. I could use some advice on finishing; it is so soft that it is really hard to get it smooth and I fear it will soak most finish up like a sponge.
  2. F

    Small Paint Hood

    Has anyone had any experience or bought a small Vent hood for spraying projects?
  3. flyrod444

    A small maple HF.

    This is a small maple vase that I turned from a bump that was on a round of maple I cored some nice bowls from. They are still drying, but this one dried in a couple weeks since I turned it to finial thickness to start. It has a little of everything. It is 4 1/2" tall by 3 1/4" in dia. Finished...
  4. CarvedTones

    small cast iron pan/hibachi/???

    I have been keeping an eye out for a cheap or free old hibachi or frying pan or ??? that is cast iron and big enough to use as a "mini-forge". The idea is you take an iron vessel, line with all clay clumping cat litter and you can use a torch to heat steel (tool or knife blanks) to anneal it for...
  5. CarvedTones

    Small persimmon spoon

    A little spindle turning and hollowing (off the lathe) practice: It will be a small token of appreciation for someone who granted me fishing access. He likes primitive folk goods and there were several persimmon trees on his property. This came from Jack (no, I didn't cut down a tree to...
  6. Tarhead

    Looking for Small Amount of Duct Sealant

    Does anyone have a partial bucket of duct sealant or whatever its called (you know...that white sticky stuff painted over taped sheet metal HVAC joints sold in ~gallon buckets) I need to paint 4 or 5 junctions on my dust collector that won't stay sealed with metal tape and a big bucket of the...
  7. 114-1431_IMG-1

    114-1431_IMG-1

    Small Shaker Style table in Cherry
    • Touchwood
    • Media item
    • shaker small table
    • Comments: 0
    • Category: Larger furniture - 2010 Calendar Contest
  8. rick7938

    Small Air Compressors

    I have one problem and two questions. 1. I bought a small H-F oil lubricated air compressor about a year ago. It has worked great until yesterday. It will not generate more than 40 psi and there is air coming out of the intake filter. I am thinking that the intake valve is stuck open and is...
  9. Pagoda Box

    Pagoda Box

    My first attempt at box making, it is a 6'x51/2' wood box made of Curly maple, Rose wood and Walnut.. Designed by David Selditz
    • Al Millman
    • Media item
    • box pagoda small
    • Comments: 0
    • Category: Disqualified Entries
  10. CarvedTones

    small piece of ceramic wool wanted

    I would like to do this: http://caribooblades.homestead.com/makingahook.html but I don't know where to get just a small piece of ceramic wool.
  11. Small_table

    Small_table

    Small table
    • SteveCogs
    • Media item
    • small table
    • Comments: 0
    • Album: Furniture Projects
  12. S

    MWTCA - Small Haul Gloat! Old Iron

    My first meeting resulted in a small haul of old iron: -Stanley 78 Rabbet Plane -Stanley #5 1/2 Plane -Stanley Standard Angle 9 1/2 block plane Plan to do restorations on them Started with the block plane and already making shavings! Great fun yesterday! Only set me back $40 bucks!
  13. flyrod444

    A small bowl.

    My mother asked me to turn a small vase for my Aunt who is turning 88 next month. She lives in a retirement home so it had to be on the small side and finished before Aug. 15. I only had a small piece of wood that was already dry so I decided to turn it into a small HF. I then turned a small...
  14. merrill77

    Small box joinery problem

    I'm working on the prototype for a small box and I'm having trouble picking the joinery. In the picture below, you can see the front and one side as it should appear when assembled. The front is 1/4" thick and the side is 3/8". Because the front is offset from the end of the side, fingers and...
  15. small bowls

    small bowls

    small bowls
    • erasmussen
    • Media item
    • bowls small
    • Comments: 0
    • Album: turnings
  16. making small bowls

    making small bowls

    • erasmussen
    • Media item
    • bowls making small
    • Comments: 0
    • Album: turnings
  17. steviegwood

    Small Sign Kit Needed

    Hi Y'all, I have the Milescraft Sign Maker that I can rout 1&1/2" & 2&1/2" letters in a sign. Does anyone know of a smaller set made for the router or even a rotary tool such as the Dremel? I would desperately like to have a set that I could rout 1/2", 3/4", 1" letters and #s for smaller signs...
  18. CrealBilly

    looking for a small peice of 8/4 RO

    Anyone got a small piece of 8/4 Red Oak - enough to make 4) 1 3/4" sq x 4' long legs? Thanks
    • CrealBilly
    • Thread
    • 8 or 4 peice small
    • Replies: 7
    • Forum: Wood
  19. timf67

    Small Stuff

    Everyone, The one thing I love about this community is that I can show off my projects to people that can really appreciate what it takes to make them! So, I am going to be selfish now and post a few pics from a few of my small but favorite projects! Thanks for looking (and indulging me!)
  20. NCTurner

    Finish sanding small pieces?

    I was using my 5" ROS to finish a large box last night and had the thought that a smaller box would be almost impossible to sand this way. I had read of using an inverted 1/4 sheet ROS finish sander, seems like a good idea. :dontknow: Just curious how some of you do it???
    • NCTurner
    • Thread
    • finish pieces sand sanding small
    • Replies: 10
    • Forum: Finishing

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top