wanted

  1. buildintechie

    Wanted: 100 amp underground service line

    Anybody have an idea where I could get my hands on about 125 feet of underground aluminum 2-2-4-6 or copper 4-4-6-8? I need it to run my new service to the shop...to replace the 15 amp service that is out there now (kinda hard to run a table saw, lights, and AC on 15 amps, let alone a 220 dust...
  2. Mike Davis

    Somebody wanted a traveler?

    http://www.patented-antiques.com/Backpages/T-F-S/Misctools/travelers.htm
  3. J

    Woodworker Wanted

    Hi, I am looking for someone within the Charlotte NC metro region to build/install a single board walnut tabletop for a period QA highboy base. The top that is presently on the table is pine and i want to replace it with walnut. Thanks, james
  4. C

    wanted, manual

    Need manual for a Fulton Combination Moulding plane.:BangHead:
  5. farmerbw

    Wanted: Painting Contractor

    We're looking to try to get our houses exterior painted before it gets too cold and I'm just now getting around to lining up some contractors to call for estimates. I know a lot of building trade folks are being hit pretty hard by the economy downturn and decided I'd inquire here to see if any...
  6. flywelder

    Wanted: Your thoughts on Belt sanders

    By the sounds of my 30 year old 3x21 belt sander, I should begin soon to look at a replacement. With so many choices, I am wondering what y'all think would be a good, dependable, long life, 3x21, belt sander......... with your inputs I'll be able to make a great choice! Tell me what you...
  7. D

    Idea Time, Input Wanted

    :eusa_thinOkay, it's getting time for me to head out and fell a few trees this winter. Right now, I have a couple of what I'm sure will be Ambrosia Maples, two standing-dead Oaks, one Walnut on the ground and another standing live that I've been given to cut down.:eusa_danc When I'm going to...
  8. Truefire

    Padauk, Bocote Turning stock (smaller pieces wanted)

    Hello gentleman i was wondering if any of you guys had some Bocote and Padauk turning stock in the arena of 1 3/8" (+-) x 1 3/8" (+-) x 6" or longer. I am desiring several pieces of each. Let me know, Thanks a great deal Chris 252-717-6699
  9. J

    Trestle Table Advice Wanted

    My question is how to fasten the table top to the lower frame. The top will #2 pine glued up to 68" x 42" with an apron that will probably end up at 64" x 38" (2 1/2"w x 3/4") fastened to the table top with pocket hole screws. :dontknow: Each vertical leg (7 1/2"w x 1 1/2"t) will be set in...
  10. M

    Boxwood Wanted

    Anyone out there have any boxwood? I need a few pieces of clear stock (can be in the rough) at least 24" long. It does not need to be wide, nor thick - even stuff as small as 1" X 1" X 24" will work. I can use a small quantity, or a large quantity. Thanks, Matt...
  11. J

    Porch Swing Construction Suggestions Wanted

    A friend of mine wants to build this for his daughter and son-in-law; this one has been in his family for at least 25 years, but protected from the elements on a porch. He's got a really limited budget so we're trying to save a bit where we can without compromising the structural strength of the...
  12. CarvedTones

    small piece of ceramic wool wanted

    I would like to do this: http://caribooblades.homestead.com/makingahook.html but I don't know where to get just a small piece of ceramic wool.
  13. mshel

    network help wanted

    This probably isn't the right place to put this, so if not, have at it mods. I need some immediate assistance from someone knowledgable of home networks. I have been pulling out my hair trying to get things fixed and need some help. So, if you are willing to help me please give me a call at...
  14. L

    Just Wanted to Say Hello

    I am returning to woodworking after a couple of decades. My experience is basically a year of wood shop in high school and a year at Palomar College in San Marcos, Ca. I recently moved to Dickson, Tn from San Diego. What a relief! The Wife isn't too crazy about the change of venue but she's...
  15. T

    Everything You Always Wanted To Know

    Everything You Always Wanted To Know About Woodworking......................... But Were Afraid To Ask. http://www.hobbithouseinc.com/personal/woodpics/_glossary.htm This is a pretty good woodworking dictionary, for newbies and pros.
  16. NCTurner

    RAL CL Wanted ad Scroller

    Not mine and if it needs moved, please do so. Thanks. Reply to: sale-uhubq-1158237606@craigslist.org [Errors when replying to ads?] Date: 2009-05-06, 8:24PM EDT Have three, flat, hardwood panels 10" x 17" that need scrolling. Not that intricate but beyond my ability and patience. Will pay...
  17. ErnieM

    Sign Maker Wanted

    A met a nice fellow at a dinner last night. He has a summer cottage somewhere near Boone. He'd like to have a small wooden sign made (about 5" x 18") for the outside of this house. No numbers - just 10 or 11 letters. If anyone is interested please send me a PM and I'll get you in touch with him...
  18. WoodWrangler

    Opinions Wanted on Pfeil Woodcraft 80th Anniversary Carving Set

    Are these as good as the normal Pfeil chisels? And is this a good price? http://www.woodcraft.com/product.aspx?ProductID=148598&FamilyID=21040 I have never carved, but would like to have the means to do it should I want.
  19. A

    Wanted!!!!!!

    "Get up and go" My get up and go, got up and went! :BangHead::BangHead::BangHead::BangHead::BangHead: If anyone finds it, please send it back to me!!!!! As many of you may remember from my "Geezers in Speedos" threads, I work at competitive swimming (Senior Games). Well, I decided to take...
  20. S

    Prazi Chest Mate jig, reviews wanted

    .

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top