1. Mike Davis

    WANTED - bar top - reasonable

    Looking for a 26 x 60 formica or other bar top Will consider just about any. Willing to pay fair price.
  2. Martin Roper

    Advice/Opinions Wanted - Rikon J/P

    OK, after mostly lurking here, you guys have inspired me to take a second (maybe it's the third) try at getting started in woodworking. I have a bunch of stuff, and a shop of sorts, but a few of my tools actually get in the way of me doing woodworking, both literally and figuratively. I don't...
  3. Mt. Gomer

    Wanted: Bostitch Flooring Stapler MIIIFS

    I've got a close (and completely trusted) friend who is getting ready to start a flooring project. He's looking to buy/rent/borrow a Bostitch Flooring Stapler MIIIFS. If anyone has one or something similar and would be willing to work something out please lt me know. Thanks! Travis
  4. froglips

    Wanted: Poplar or Soft Maple scraps...

    If you are like me (my deepest sympathies), you save your scraps. I'm working on a little Mortise chopping evening for the Hillsborough Orange Woodworkers group. We are "pretending to make table legs". So, looking for stock on the order of 1 1/2 to 1 3/4 square, 8" to 10" length...
  5. U

    Pinhole Camera Maker Wanted

    Hello there. I'm looking for someone in the Wake County area who can build a pinhole camera from exotic hardwood. I do not have plans, but do have photos of what I'm looking for. I will need the camera by the end of October. Please let me know if you're interested. Thanks - Christine in Holly...
  6. Dean Maiorano

    Sharpening carving tools - suggestions wanted

    G'day All! I need some help choosing the 'best' all around system for sharpening carving gouges and knives, as well as the straight stuff - chisels and plane irons. Most of my 'unplugged' woodworking is in carving and I'm trying to increase my skills to a higher level. It is obvious to...
  7. SteveColes

    Wanted - guniea pig

    I need someone in the Raleigh Area who is having these reported problems about responsiveness and hanging or not able to post, etc. Who will let me visit them and try to debug what is going on. I would be using you computer in your home. I might need to install some debug software, changes...
  8. SgtSnafu

    Wanted: 6x48 Belt sander for parts...

    Hey everyone, I am looking for a non-working 6×48 belt sander for parts. I am mainly needing the belt assembly parts only, the rollers, the frame to hold the rollers and platen, basically this whole belt assembly. I do not need the motor, disk sander parts, or machine housing. I am...
  9. bobby g

    Lipping Planer wanted

    I'm going to be building lots of bookshelves for our Library and Entertainment Center and plan to construct the shelves using 3/4" cherry plywood with a 3/4 X 1 1/2 cleat on the front. I need to finish the cleat flush with the veneer without getting into it. Thought I'd like to try out a lipping...
  10. U

    Quick and easy woodworking help wanted in Chapel Hill

    Hi all, I posted this ad on craigslist but thought I'd also list it here. http://raleigh.craigslist.org/trd/1682755893.html I'd like to construct a large plywood terrarium and stand. I wanted this to be a DIY project as much as possible, however I lack the tools and workspace to cut the...
  11. D

    Feb 2010 Popular Woodworking wanted

    I'd like to read the article on the Shoji cabinet. If anyone in the Raleigh/Clayton/FV area has this recent issue and can let me borrow/rent/buy it, please let me know. Thanks,
  12. Umich684

    Teak wanted

    Looking for 300bf of Teak, mixed grade, 8/4. Having a hard time finding any. I'm in Charlotte, willing to drive, anyone have a suggestion?
  13. D

    Figured Wood Wanted

    If anyone knows any local (within 1,000 miles) sources for buying figured hardwoods at reasonable prices, then please email me tailgatefarms@gmail.com or call 704-962-2823 cell. I live in Charlotte, NC. Thanks, David EB
  14. R

    Always wanted to try this

    Ever have a strange idea and wanted to try it? This one came out pretty good. I made a small box out of spatled maple about 6"x8"5" for a friend's wife. Took some of her family photos and etched them on a piece of copper. Filled the etched image with white epoxy resin, tarnished the copper with...
  15. gordonmt


    My wife has set me on a quest to add several birdfeeders to our backyard. Does anyone have any plans they would be willing to share to help me out? Thanks in advace. Mark
  16. steviegwood

    Small 4x4 Dump Truck W/Snow Plow Wanted

    hi folks, the wife and i will be looking for a small dump truck 4x4 with snow blade preferred. we could put a blade on later. we have a dodge dakota and want to go to a full size truck but also need a snow plow and dump. if we can find a dump reasonable enough we can just get a 1/2 ton truck for...
  17. NCTurner

    RAL CL Wanted ad Cabinetry

    WTB: 12" Maple Base Cabinet (Durham) Date: 2010-01-28, 1:39AM EST Reply to: sale-phyge-1574293473@craigslist.org [Errors when replying to ads?] Looking for a 12" Maple Base Cabinet and toe-kick that match the style of those pictured below for part of a kitchen update. (Hoping to replace 3'...
  18. R

    Woodworking instructors wanted

    Asheville Woodworking School will be increasing the number of classes offered. We are currently looking for experienced teachers of all types of woodworking. Teachers should have references from students. The school occupies 2,000 sq ft in the lower level of Asheville Hardware: 1,000 sq ft...
  19. CrealBilly

    Flute Maker RE: Wanted: Wood Lathe to Turn Tubes for Flutes

    Got 2x4's? Make it as big or as small as you want it ---> http://shopsmith-tool-hunter.blogspot.com/2008/05/shop-made-lathe.html What more does a store bought lathe have to offer, besides trouble?
  20. B

    WANTED: Used WW Machinery

    Am looking for some used, dependable WW machinery: 1) 14" bandsaw - I like the Rikon 10-325 and Jet 710116K, but will consider others. 2) Benchtop Planer - I like the Dewalt 734/735, but will consider others. 3) Ridgid OSS 4) DC Sys (just missed out on Jeremy's Jet 1100!). Am looking at the HF...

Our Sponsors