plywood

  1. Matt Schnurbusch

    Maple Plywood

    Where is the best place to purchase a relatively small amount of maple ply? I am going to be starting on a built in kitchen nook for my brother and he wants it built from maple. I saw some at H.D. $55.00/sheet for the first time the other day, but I'm unsure of the quality. Matt
  2. T

    Quality Plywood or Lack thereof??

    So, I went hunting for 3/4x4x8 sheets of oak, cherry, maple or even birch plywood, yesterday and today. The last few times I did this it was getting tougher and tougher to find any kind of consistent quality, but not impossible. Well, things sure hit rock bottom this time. I went through 4...
  3. Bob Buchholz

    Prefinished Plywood & Maple Drawer Blanks

    Once again Norm has gotten me into trouble. I am about to start on new cabinets for the kitchen and Norm has me sold on the prefinished plywood that he used on his kitchen remodel series, as well as the prefinished maple drawer side blanks in 8' lengths. Unfortunately, I can't seem to actually...
  4. johnpipe108

    A plywood and skate-wheel center rest

    I've been meaning to make up a center rest for some time, as the commercially-made one's are for 6" center and up, and the Jet Mini is a 5" center height. It's shown here with a scrap test-piece, but will be used for end-boring bagpipe pieces, or supporting longer slender pieces, and for...
  5. ScottM

    10" plywood blade recommendation

    I am looking for recommendations for a 10" plywood blade that won't break the bank. I am thinking in the $50.00 - $60.00 price range but I have a little fexibility. I don't have the cash to buy a new Forrest blade.
  6. WoodWrangler

    Quality Plywood Around Charlotte?

    I know we've covered this before ... but I don't remember the answer and couldn't find the thread. And now we have many more members ... so maybe I'll learn something new. Where can I buy good quality (baltic birch or similar) plywood in the Charlotte area at a reasonable price?
  7. welldigger

    plywood edging

    I'm building a TV stand with a plywood top. I'm going to wrap the plywood w/ 3/4" X 1-1/2" beveled boards with mitered corners. What is the best method for attaching the banding to prevent wood movement?
  8. DIYGUY

    Raleigh CL - 40 Sheets Furniture Grade Plywood

    Usual disclaimers - not mine, no relation to seller, etc. It says it is on Westgate Road which is right off Hwy 70, near US540. If someone wants to help me with a little transport issue I may join in the fun, as it is very close to the family abode . Good luck to all ...
  9. Travis Porter

    MLCS Plywood edgebanding bits

    Around 6 months or so ago I picked up the MLCS shaper cutters for plywood edgebanding. This set here. Although this set is for a shaper, MLCS and others make sets for the router that work pretty much the same way. This set makes a tongue and groove, while others may just do a V cut...
  10. Joe Lyddon

    Plywood Edge Trimming...

    In my last issue of Woodsmith, #175, they are using edg trimming several ways... which has me a little confused. One set of plans has: T&G edge with the Toungue on the plywood and the Groove in the Hardwood. Glued straight to flat edges. In another set of plans: T&G edge with the...
  11. rywilson

    Plywood suggestion for shop cabinets?

    I'm plan on building some shop cabinets soon. I started looking at Birch ply and see the price is about 85 a sheet for 3/4". I'm really just learning how to build cabinets so I don't want to spent a ton of money yet I want something that will look decent when painted. I also want to stay...
  12. LeftyTom

    48"x43" x3/4" Plywood

    http://winstonsalem.craigslist.org/mat/581491921.html Not mine, no one I know.
  13. Bigdog72

    Birch plywood

    Ok guys, I got all my tools set up so now the re-education starts!! Can y'all recommend a good source for birch ply (for shop cabinets) in the Raleigh/Fayettevllle area? Thanks in advance!
    • Bigdog72
    • Thread
    • birch plywood
    • Replies: 7
    • Forum: Wood
  14. skysharks

    Cross cutting Plywood- Techniues

    Thinking out loud in the Shop today, after screwing up a piece walnut plywood. What whys do other use to croos cut panels of plywood. I have not problem ripping plywood on the table saw, however cross cutting is a different story. For years I have been laying it flat on my table...
  15. K

    Where can I find preprimed plywood?

    Anybody seen this stuff lying around NC?:BangHead: Kenneth
  16. D

    made trip to jackson lumber for ash plywood...

    and what a place. he has about any type of plywwod, rough cut lumber and even flooring. its not a store tho, its a storeage warhouse. he has amazing prices. he's a wholesaler, so he doesn't let people wander around looking.also, u need to call him to set up time to pick up lumber. the ash i...
  17. B

    Bending Plywood Questions

    I need some help. I am designing my home office furniture (desk) and want it to have some curves. So I am considering laminating together 5 pieces of 3/8 inch bending plywood to serve as the legs. The legs will be about 2 inches thick and almost as wide as the desk top so they will be fairly...
  18. D

    where can i find affordable ash 3/4 plywood?

    in raleigh area. i know of raleigh hardwoods on poole road, but wondering of any other distributors in area who may sell ash plywood! thanks all.:icon_thum
  19. Will Goodwin

    Cutting Plywood Patterns

    As some of you know I am preparing for my first project. Since I have started reading these forums, I have gained a new respect for doing things "right". Before I started reading these forums, I would have thrown the plywood on top of a couple of sawhorses and started sawing with a jigsaw...
  20. Bigdog72

    Plywood Work Bench

    Has anyone built this plywood work bench? http://www.taunton.com/finewoodworking/FWNPDFfree/011181054.pdf I am not looking for a cheap alternative. It looks better than using 2x4's. Please give me your opinions!:saw:

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top