good

  1. Flute Maker

    Looking For Good Used Wood Lathe

    Im looking to upgrade and get a heavier lathe that I can turn 30" between centers and do some bowls...I have looked at craigslist and googled used wood lathes with no results yet...This maybe good cause Im not quite ready money wise anyhow. I am looking to spend $1000 and have about $700 in hand...
  2. Mark Stewart

    Can You Help for a good cause?

    Hi folks, The place where I work is trying to provide some gift baskets/boxes for the children at a local hospitals Cancer ward. I know that things are tight so, I thought I would ask all of you if you have made something that you would like to donate for us to sell at a craft sell in the...
  3. J

    An aggregation of dovetails - it's a good thing this is practice!

    Hi folks, I am embarking on the building of a mottled makore bench. It is fairly simple, a 14" wide board cut in 3 lengths (for the uprights and seat) with a stretcher below and a wenge sculptural detail between the stretcher and seat. I want to use dovetails at the corners where the boards...
  4. ScottM

    GWL - Good Will Lathe Time

    Well folks Steven (Zapafish) is ready to pass the good will lathe on the next lucky person. For the newer folks the GWL was a donation made by our founder Steve Coles. It is a Rikon lathe, complete set of turning tools, grinder, wolverine sharpen jig, a chuck, live center, and other...
  5. Rhythm House Drums

    Good source for Walnut around Charlotte

    I'm actually in Matthews and am looking for a reasonable source for Walnut and other hardwoods, but mostly walnut. I use a lot of it in what I do, and so far have only found prices I find way high, or the selection is extremely limited. I've seen it over 11 bucks a board foot.. I currently...
  6. ErnieM

    Benchtop router table - FREE to good home UPDATE

    Four members have expressed interest in this table - thanks to all who responded. I am closing this thread. Having just built a router table, I'm looking for a good home for my old benchtop table. It's a Sears Craftsman Professional about 7 years old. If someone in NCWW has no table and...
  7. kooshball

    where to buy GOOD pneumatic quick connects?

    I am struggling with the quality of the quick connects that I have bought from Lowes and Northern Tool. The work well and seal properly for a few uses then they quickly start to leak (when connected to the toll) as the seal around the male fitting on the tool slowly fails. Where (and what...
  8. MrAudio815

    Is this Bearing still in good shape?

    Merry Christmas NCWW's, I pulled this bearin off the straight blade cutter head on my jointer and wanted to know if it still looks good enough to use on the Shelix cutterhead? Don't wan't to get it on and it not be good. Chipped black stuff right side middle Closer view of other side...
  9. S

    Good Morning

    I guess I should introduce myself. I've been lurking for a while. I'm about 35 miles south of Charlotte in the town of Catawba, SC. Been in the area since 2007 with a job transfer and have been dabbling in making sawdust for a long time. I've finally been able to get a "real" workshop here or as...
  10. ScottM

    Good deal for a beginning turner in VA

    Not mine. No connection. Just passing along a good deal I found. http://richmond.craigslist.org/tls/2090099082.html
  11. Wolfpacker

    Good tool/deal or not ? Bostich brad nailer

    Just saw this on the Tooliday site and was wondering if anyone has this model and can vouch as to whether this is a good tool or not and is it really a good deal. http://recon.tooliday.com/ The sale ends in less than 2 hrs. Thanks, Brent
  12. steviegwood

    Need good economical bandsaw blade?

    Hi Folks, I am in need of some 131 & 1/2" bandsaw blades in 1/8", 3/16" and 1/4" . Where is the best most economical place to purchase them? I want to make some bandsaw boxes along with doing a lot of contouring shelf edges. I have no experience with these smaller blades in this application so I...
  13. kooshball

    good cross-cut blade for circular saw?

    I have a standard, no bells or whistles circular saw (7 1/4") that I need to use to cross-cut what will become the top of my 61" wide dresser. Any recommendations for a good cross-cut blade that won't give any tear out (the top is 3/4" walnut)? Thanks
  14. Flute Maker

    Good Saw For Prepping Wood for Turning?

    Is anyone familiar with this chainsaw? I would use it for prep work for turning bowls etc from cut branches , limbs etc. thanks http://www.woodcraft.com/Product/2080192/28384/Makita-14-Electric-Chain-Saw.aspx... Or does anyone have a better suggestion...maybe even cheaper?? I have been...
  15. N

    Might be a good deal for someone...

    Was walking through the Sears in Concord (Carolina Mall) yesterday and came across this. Reviews have been good on the professional series saws, so I'd thought I'd share. I bet they could do better than the $699 too... View image in gallery View image in gallery
  16. Flute Maker

    Good Electric Chainsaw?

    Is there such a thing as a good electric chainsaw ? I will just use it to cut pieces for the lathe. I know I wouldnt be able to take it in the woods but I dont really want a gas one.
  17. T

    Good price for a backup planer

    I saw this over @ Amazon and thought what a good deal for a backup planer unit.While it has no cutterhead lock thats not really too inportant to me as I can adjust for the snipe that these types of planers inevitably have but for $206 new delivered to my door I,ll order one just for the...
  18. F

    FREE Hardwood to good home

    Hi, first post. Woodcraft, in Matthews, NC recommended this site to me. I'm doing some garage cleaning and need to give away some wood that I collected some years ago. I can't tell you the species but it looks to be mainly oak. There may be others. It has been sitting in the corner of my...
  19. Bryan S

    After 24 Years it was a Good Day

    It sure does not seam like it but, 24 years ago I spoke "I Do" to a wonderful gal. :occasion1 Do not have any idea why she has wanted to put up with me for this long but she has, and I am all the better for it.
  20. SubGuy

    What is a good price for lumber?

    I've found a new source of lumber and I think the prices are good. What do you think is a good price on Walnut, Cherry, WO and RO per bf?
    • SubGuy
    • Thread
    • good lumber price
    • Replies: 23
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top