works

  1. P

    Trouble shooting Delta Scroll saw- IT WORKS!

    Turns out all I needed to do was blow air in and around the on/off switch and the speed control knob....don't I feel silly... she runs like a charm now!
    • PamH
    • Thread
    • delta scroll shooting trouble works
    • Replies: 3
    • Forum: Scrollsaw Work
  2. T

    The Works

    The other week there was discussion about used "The Works" (toilet bowl cleaner) for rust remover.... I guess I should have read the warnings before using it.... I did not figure it would be as strong and dangerous as it really is... nothing bad happened but it did eat a scotch bright pad I was...
  3. Gotcha6

    .........and it still works!

    A couple years ago I dumpster dove a building directory from a project I was doing. I always knew what I'd do with it, and finally this spring I did it. It is an aluminum frame with about 6" of depth and an acrylic cover (hinged). So. I got me a bundle of 1" thin wall PVC pipe and a couple...
  4. R

    Bridge City Tool Works???

    Found this posted on reddit, thought I would share it here. A tad bit expensive but neat nonetheless. Has anyone here used any of their tools? http://www.youtube.com/watch?v=3ruwZdaPjbs&feature=player_embedded http://www.bridgecitytools.com/Products/Jointmaker+/Jointmaker+Pro+v2
  5. Joe Scharle

    Microsoft Works

    Does everyone have this product? It comes with a simple budget spreadsheet that I think would be helpful in forecasting. Directors who have project/cost responsibilities could present expected cost, followed at project end of actual expenses/gain. If you are already using a budget planner...
  6. Bryan S

    Oh the Frustrations, but what fun when it works

    Since trying my hand at the Goodwill Lathe one thing that has definitely happened is the frequent utterance of many words in the shop that just can not be repeated on this site.:gar-La; I'll be cruising along thinking all is going well, then wham, a bad catch, followed by the piece being flung...
  7. danmart77

    Curly Red Maple Kentucky Rifle: in the works

    View image in gallery View image in gallery View image in gallery Here's some curly red maple to look at. I have the tapered and flared barrel in the channel so I'm going to start shaping the stock in a week or two. I am working on a desk and bookcase these days and that is keeping me busy...
  8. WoodWrangler

    Anyone going to Wood Works show in Asheville?

    Anyone planning on going to the Wood Works show in Asheville, NC in October? ASHEVILLE, NC October 2 - 4, 2009 http://www.woodworksevents.com/home_nc.shtml SHOW LOCATION: Asheville Civic Center 87 Haywood St. Asheville, NC 28801 PHONE:828-259-5544...
  9. SteveHall

    Wood Clock Works

    Anybody here ever make wooden clock works? I spent about three hours the other night looking at various sites and YouTube videos, it seems that with a good scroll saw, a little BB and a lot of patience, one could make it in a month of evenings and weekends. Here's some links...
  10. Canuck

    Air Filtration that Works!

    I really don’t post gloats too often, but I had to tell ya ‘bout this find on Raleigh CL. About 4 years ago, during my last year of gainful employment, I had a lung collapse three times on me! :eek::eek::eek: I gave up the smokes, retired and have had no lung problems since! My LOML (being a...
  11. MrAudio815

    It Works!!!!! Yuppie

    Hey everyone, Well a month or so ago I asked for help with my Dishwasher because it wasn't draining, even after all I did and the suggestions you all gave me. Well my wife opened it up a the other day and it smelled from the standing water so she poured some vinegar in the water and checked...
  12. J

    Stanley #289 works the NC walnut

    If you have never seen a skew rabbet plane in action, you have missed a treat. Here is a picture of my #289 in action on a dado. More of that NC walnut that I am using for a corner cupboard. This task was to make an open dado for the back piece. I started with a saw kerf, opened it up with a...
  13. H

    Please evaluate works of our memebers..

    Hello, I'm Korean woodworker. The attachments are work pictures of our members. (We're operating the Woodworking academy in Korea) Have a good day.
  14. michaelgarner

    Eureka it works!!!

    I was perusing the latest shopnotes edition this past weekend and saw an article on blade cleaning. Something I have to say I have not done a lot of. Well I pulled out the Freud Diablo that I thought needed to be sent out to be resharpened and threw it in the low cost baking soda magic for 8...
  15. J

    Wood Works Show in VA

    Wood Works will be doing a show in Richmond Va, Oct 12-14, 2007. This will be only WW show in our extended area this year. This also happens to be opening week end of North Carolina State Fair. I'm thinking about going on Sunday the 14th. Can't go on Friday due to obligations, and on Sat. I take...
  16. erasmussen

    It works

    I finished making a sliding table for my saw, as the OEM one has problems. The base is solid and strong, 2 tracks I put 4 jack screws on it where it sets on the rails So I could get it perfectly level with the top of the saw actually I set it .01 mm higher then the top so that flat boards...
  17. A

    Cyclone High Dust Alarm IT WORKS!!!!! *w/new pics*

    My shop is above a garage and my dust collector and cyclone are on the garage level so I can't see it. My push-through cyclone uses a bag instead of a drum for the dust and chips and after over-filling my cyclone dust bag, having it back up into the cyclone, and having to clean out my cartridge...
  18. dancam

    Steel City Tool Works

    Folks, FYI...I queried a SC supplier regarding lathes and jointers and the following is the info supplied. Dancam -------------------------------------------------- We are now stocking some of the Steel City machines. At this time they are only offering mini-lathes. They do offer 6 and 8...
  19. Jay

    Night Stand in the works

    I am getting ready to start finishing a night stand I have been working on for a while now. It is made out of red oak plywood and red oak solid wood. My wife has picked out some stain to try to match it to the furniture we already have. It is a minwax brand water based stain. My question is...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top