round

  1. S

    spinny gloat, uh oh, dark round side beckons

    .
  2. Mark Fogleman

    Guess I never Got a Round Tuit

    My start with NCWW was in the early days when intros were not as actively solicited and it never got done. So... Hey y'all, I'm Tarhead (UNC fan who sometimes accuses UNC athletes and their coaches (especially their Football coaches...remember Dick Crumb? Wish I didn't) of being Tarheads when...
  3. DavidF

    Table saw tapering - either way round

    I can't think of a preference my self, but is there a right and wrong way or a preference to feeding a tapering jig into a TS so that the the thin end or the thick end gets cut first. I know the hinged aluminium taper jigs cut thick end first, but is there any reason not to do it the other way...
  4. CrealBilly

    What the .... Jeff goes round?

    Well sorta, I'm not all that happy with the finish went a little to thick with the toner and muddied up the pecan grain.
  5. Trent Mason

    First round square thing

    Well, tonight I was in the rare situation that I had some free time. I hadn't been in the shop in two weeks because of work, so I jumped right on the opportunity tonight. :yes: I don't have any fancy wood to work with, so I just grabbed a scrap piece of 2"x6" and cut it square. I've been...
  6. CrealBilly

    RedNeck Logging big round ones made flat

    Ok Fred mission accomplished, big round ones made into small flat and square ones. I figure there's a good 1000 BF there about 1/2 pine and 1/2 sweet gum. Here's what the sweet gum looks like. Some of the boards look like someone took a brush with burnt umber and burnt sienna and touched the...
    • CrealBilly
    • Thread
    • big flat logging made redneck round
    • Replies: 35
    • Forum: Wood
  7. CarvedTones

    Made something round with the new-to-me lathe

    It's the one I posted about possibly cannibalizing and then powering with a grinder. It is powered with that for now: The grinder is mounted on a hinged platform and I can move the belt to the next larger sheave without rubbing, so it is a two speed of sorts, but the one it is on is the...
  8. JackLeg

    Help! Round Tenons?

    I need your input please. We are attempting to build some Deacon's Benches that have round legs, arm supports, etc.. We have the "flatwork" figured out, including some compound angle borings, BUT, we need to cut some round tenons on the ends. What is the easiest, and safest way to...
  9. TracyP

    My First Round Gift!!

    This is the first pen that I have given to anyone as a gift or otherwise. I gave this pen to my mother in law who is very good to me and actually lives with us.:icon_scra. It's ok, she is sweet, Just ask Jackleg and Mary if you don't believe me:gar-La;. They had the pleasure of meeting her at...
  10. T

    Sanders- Which would be better all round??

    Morning all, I find myself needing to buy a sander, other than the typical flat vibrating, orbital and angle/corner sanders... I have narrowed (??) it down to either an "Oscillating Spindle Sander", likely a bench top model or one of the combo "Belt/Disk sanders". It will mainly be used for...
  11. Glennbear

    Round steel stock for Oland tool

    Part of the legacy my father left me was the collecting habits of Fred Sanford, and the engineering abilities of Rube Goldberg coupled with the "making do with what's you got" inventiveness of Red Green. In several threads recently members have mentioned difficulty in finding mild steel round...
  12. J

    Round Wood

    So I go to the BORG - because I needed a couple of pieces of quarter round like 8' long - no worries I thought it's just a little tiny piece of wood. Well they don't stock 1" quarter round. But being the wood working kinda guy I am - I buy a 8' long piece of 2" diameter poplar and figure I'll...
    • jeff...
    • Thread
    • round wood
    • Replies: 19
    • Forum: Wood
  13. b4man

    How to attach quarter round to...

    ...brick? Liquid nails? drill small holes? What can I use? :icon_scra I need to install it in my sun room to protect the floating floor that will be installed later this week. TIA!
  14. Douglas Robinson

    Round Table for the porch

    LOML pointed out a table she saw in a magazine that she wanted. Needless to say I was tasked with building one. Then we lost the picture. So I made it up. :wsmile: The table is about 56" in diameter and is made of poplar. LOML is going to paint it after I add sanding sealer. I glued and...
  15. Douglas Robinson

    Need 3/4" round bench dogs tomorrow at Klingspor

    I am doing a demo on routing a bowl tomorrow at Klingspor. Does anyone that is going have 4 round bench dogs I can use? The holes in their benches are 3/4". Thanks in advance. Doug
  16. Mike Davis

    Quarter Round?

    I needed some for a lab case I'm building, this one will hold an antique beam balance. The quarter round holds the glass in the door. This is Sapele from Kyle.
  17. CarvedTones

    near perfect round taper

    Yeah, I know; it looks like I am posting in the wrong section. This is exactly what lathes were made for. But I don't have one. I may make a small one or get one of those tiny hobby ones for just this purpose, but for now, I am thinking about how to carve and/or sand to do it. Here's the...
  18. quid_non

    How to make small, perfectly round circles?

    Hi All! I'm trying to repair some goofs I made when installing euro hinges in some oak cabinet doors. Issue is I need to "plug" the 1 3/8" hole I put in the wrong side. Any ideas on how to cut a perfectly round 1 3/8" "oak plug"? I don't have a scrool saw, but do have a band saw. I thought...
  19. walnutjerry

    Playing 'round Again

    Here are some shots of latest play time. The natural edge bowl is turned from ash and is the largest at 11.5 inch diameter and 8" tall at the highest point. The smaller bowl is ash also, 3.5" tall with a diameter of 4.5". These were roughed out while green-about a year ago. Placed in a...
  20. Eaglesc

    Chekerboard in the round

    Bloodwood and Holly with Sauers black veneer This is going out tomorrow as a belated birthday present to a good friend. The blank is oversized almost 7/8ths of an inch. The pattern repeats 12 times in each direction The center and ends are sacrificial wood and will not be part of the blank. Th...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top