bowl

  1. P1010204

    P1010204

    Oregon Myrtle Lidded Bowl
    • Nate Davey
    • Media item
    • bowl lidded
    • Comments: 0
    • Category: Member Galleries
  2. Flute Maker

    Bowl Turning 101 ?

    I want to start turning some simple bowls ..Where is best tutorial to get me started? I basically just do spindle work right now
  3. CarvedTones

    Father son scroll bowl

    I started a thread a few days back about the basket/bowls that Cathy Skipper brought to the picnic. One of my boys was really taken with the idea of making one. Like this: It turns out he was really just interested in doing this: (that's Ailene's Clear Gel Craft Glue. with all those...
  4. P

    ok this is my bowl i turned

    View image in gallery View image in gallery View image in gallery View image in gallery sorry guys about the confushion. please forgive me. SO HERE IT IS View image in gallery
  5. gesiak

    1st Bowl

    This is the first successful bowl turning. Turned this Saturday at a local workshop. Found out that it is far easier if you have the correct tools....... It is made from spalted birch. Thanks for looking!
  6. Rob

    Ambrosia Maple Salad bowl set

    Neighbor cut this tree down so made a set of 4 bowls from it for my Sister in laws wedding present. They loved it and that made me feel good.
    • Rob
    • Thread
    • ambrosia bowl maple salad set
    • Replies: 9
    • Forum: Woodturning
  7. scsmith42

    Black walnut for bowl blanks in Raleigh

    Sawduster sent me the link below today (thanks Robert!), and I just followed up with the owner. He has a large (36" DBH) black walnut that came down in the tornado's. Unfortunately, the trunk is hollow and it split off, so there is probably a lot of shake in the remaining trunk wood...
  8. N

    Large Walnut Bowl Blanks

    They guy I get my lumber from has a 36" in diameter Walnut tree that he doesn't know what to do with. He doesn't typically cut saw lumber just for turners but if I can get enough interest I may be able to talk him into cutting one section for bowl blanks. Any interest???
  9. Mark Stewart

    Wedding Bowl

    I made this for a guy Im in school with. he is to get hitched on picnin day for us.
  10. P

    new bowl i just finished

    :icon_cheersi just finished my second segmented bowl today 5t looked great . i will post pics soon.:icon_thum:eusa_danc:eusa_clap:gar-La;
  11. zapdafish

    attempt at a square bowl

    This is the bowl that soaked up alot of Danish oil. Im posting it now since it's gonna take forever for it to dry out before I can complete the finish. I dont have a bandsaw and didn't feel like turning off the corners to get the blank round before turning a bowl so Googled on how to turn a...
  12. zapdafish

    my first segmented bowl

    I used scrap yellow pine and walnut. I was suprised how pretty yellow pine is after its shined up. Finished it with several coats of spray on lacquer. This bowl is made with stave segments so I only had to make one ring. I plan a few more with taller segments to get the hang of it and make...
  13. crokett

    A Burl Bowl

    White oak burl that somebody gave me. A commission of sorts. Here is the rough turning. there was a ton of bark. You can see that in the first pic. I turned it down smaller then I wanted, then dug out the rest of it. In the second pic you see the void. That will stay for the final turning...
  14. crokett

    DNA Method For Drying A Bowl

    This is admittedly a very small sample but... a 12" green polar bowl and a 10" green poplar bowl soaked in DNA a few weeks ago are both just about dry and ready to finish. A green 8" walnut bowl that was nonetheless not nearly as wet as the poplar was turned last week and not soaked in DNA. I...
  15. zapdafish

    what do you use to sand the inside of a bowl?

    Not quite sure what the best way is to sand out the interior of a bowl and would like to see what you guys are using. I tried by hand with sandpaper but it heats up kinda quick and if I am not careful I end up with a groove from the edge of the paper which means more sanding I saw some mention...
  16. N

    NE Pecan Bowl

    Was out in the shop resawing some free Holly I picked up while walking the dog. Wanted to get the bark off it before it discolored the blanks. Anywho, made a 7" diameter NE bowl out of some Pecan I got from RobS. Didn't quite get the front and back symmetric, but the sides are. I hand sanded...
  17. NE Pecan Bowl

    NE Pecan Bowl

    • Nate Davey
    • Media item
    • bowl ne pecan
    • Comments: 0
    • Category: Member Galleries
  18. N

    Ambrosia Maple Bowl

    Well, I'm not sure how to describe the shape of this. I was trying for an ogee, but it still seems a bit elusive for me. After turning the candle stick I was casting aimlessly about the shop trying to figure what I wanted to do next. My eyes rested on this piece I had cut into a blank and...
  19. Ambrosia Maple Bowl

    Ambrosia Maple Bowl

    • Nate Davey
    • Media item
    • ambrosia bowl maple
    • Comments: 0
    • Category: Member Galleries
  20. crokett

    Turning A Large Bowl

    I have the opportunity on Friday to get a Redbud stump that is about 15" in dia. It is still alive so would need to be roughed, then let to dry. Class has a lathe big enough to do the roughing, and I have an instructor to help, but my lathe only has a 12" swing. Can I rig a tool rest and turn...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top