spindle

  1. Vega 24 bowl lathe bearing and spindle 3/4"

    Vega 24 bowl lathe bearing and spindle 3/4"

    My Vega 24 bowl lathe bearing and spindle 3/4". Also spindle adapter for Shopsmith from 5/8" to 1" x 8tpi
    • sasjzl
    • Media item
    • 24 adapter bowl lathe spindle vega
    • Comments: 0
    • Category: Member Galleries
  2. woodnick

    Delta Oscillating Spindle Sander

    I have a Delta SA350 Osc. Spindle Sander on order and it didn't show up yesterday and I would like to build a stand this weekend. Would someone who has one PLEASE measure the width and depth of the base and the center to center of the mounting holes. Thanks Nick
  3. Boss sander

    Boss sander

    • Woodsaw
    • Media item
    • sander spindle
    • Comments: 0
    • Album: Drum Sander
  4. A

    Spindle Sander Refurb Complete!!!!

    A Spindle Sander is reborn. For those who missed my earlier posts, I picked up an old Max spindle sander on Ebay. I haven't been able to discern the date of manufacture yet but the serial number makes it 1980 or newer, so at the oldest it is nearly 30 years old. It was made in USA by Max...
  5. A

    Spindle Sander rebuild - Update #1

    I was able to disassemble the spindle mechanism down to just the spindle socket with its seized spindle which made it much easier to take to a local machine shop. For $25 he heated it up nice and hot and put a REALLY BIG WRENCH on it and successfully separated the two parts!!!! Spindle socket...
  6. A

    Spindle Sander is home

    I picked up the new (old) spindle sander I won on Ebay, in Wilmington on Tuesday, but since it has been raining here ever since, it sat in my garage for the last three days. I finally hoisted it up to my shop earlier this evening. The machine is a Max OVS-1 oscillating spindle sander. The...
  7. nelsone

    Spindle sander question

    I am considering getting a spindle sander. I figure it would probably be a lot better that using my drill press (I have to keep re-securing the chuck!). What does everyone (anyone?) think of the Ridgid spindle sander. It seems that the belt attachment would be a handy feature.
  8. CarvedTones

    Cutting and drying spindle blanks

    I picked up some maple logs cut to firewood length. In the course of a day or few (not sure when they were cut) unsealed, they each had exactly one small crack form in the center. I drove a wedge in the crack and split each one and some I split a second or third time if there was some hint of...
    • CarvedTones
    • Thread
    • blanks cutting drying spindle
    • Replies: 15
    • Forum: Wood
  9. DaveO

    Bosch takes care of their customers

    In my on-going saga of issues with the Bosch Colt I have received nothing but excellent customer service from them. Originally I had the spindle lock button strip out and with some sage advice found here I contacted Bosch and a spindle wrench showed up at my door Thread. Well then the spindle...
    • DaveO
    • Thread
    • bosch care colt customer customers lock satisfied service spindle takes warranty wrench
    • Replies: 9
    • Forum: User Announcements
  10. WoodWrangler

    Spindle Steady Pre-Flight Fitting

    As started here ... http://www.ncwoodworker.net/forums/f32/steady-rest-sneak-peek-21843/ Well, the first fitting of the spindle steady is took place this afternoon! When I get some time, I plan to put it to the test & report back ... but I wanted to share the final product with you. I think...
  11. S

    Osc Spindle Sander Opinions

    Considering getting this HF (currently on sale). Vs. The Triton at Woodcrafters. About $40 plus diff. but look exactly the same sans paint. Any one have experience with either one of these? Thanks Matt
  12. S

    Bowl lathe spindle

    Today I was looking around for some tool steel online when I came across a source for threaded rod with exactly the specs that I wanted for a bowl lathe spindle. http://www.speedymetals.com/ps-3681-188-0-zinc-plated-steel-threaded-rod.aspx Here is the link to the website. Think it will work? Any...
  13. PChristy

    Spindle sander kits

    Someone posted that they found a good deal on a drill press sanding spindle kit - It was awhile back - does anyone know who this was or where they got it? Thanks in advance
  14. WoodWrangler

    CL: Jet Spindle Sander

    http://charlotte.craigslist.org/tls/1015582075.html Jet JBOS-5 benchtop spindle sander--used once!!! - $200 (Harrisburg) Reply to: sale-1015582075@craigslist.org [?] Date: 2009-01-31, 4:17PM EST JET 708404 JBOS-5 5-1/2 Inch 1/2 Horsepower Benchtop Oscillating Spindle Sander with Spindle...
  15. Tarhead

    Someone was Looking for an Oscillating Spindle Sander

    Found one on auction in Lincolnton: http://www.irsauctions.com/popups/bidders_paddle.asp?lot=109416&auction=E817KSJHQSCTQYE6ALWSB6EUQC2NAZ&id=11860 Good luck finding the spindles. http://www.freemansupply.com/T5StateSpindleSand.htm http://www.freemansupply.com/SpindleSandersAbra.htm
  16. CarvedTones

    Small Sorby Spindle Master gloat

    Here 'tis: I think this will be a good choice for turning tuning pins and end pins; better than my full length 1/2" skew, though the skew is still my weapon of choice for initial rounding. Attempts at beads improved from awful to reasonably okay within a couple of minutes. Sharpening it...
  17. DaveO

    Turning a straight spindle???

    How do y'all go about it? I was turning some ¾" dowels today, about 9-12" long. Started with square stock, rounded with a roughing gouge. Parted down to the desired diameter at both ends. Then finished turned to size with a 1" skew. They looked straight, but after sanding I realized that I had...
    • DaveO
    • Thread
    • spindle straight turning
    • Replies: 9
    • Forum: Woodturning
  18. K

    Oscillating spindle sander

    The more I read the two BS box books the more I think I might need a Oscillating spindle sander. I did look in my WWS book and I really do not want to pay as much as the Delta and Jet cost. Any opinions welcome. Read the reviews on Amazon for this one Delta SA350K Shopmaster Boss 1/4...
  19. froglips

    More refinishing spindle leg tips.....

    Yet another tip. History, stripped and refinishing a drop leaf table for the LOML. Prob? 6 legs and 8 stretchers, all turned. Beads, coves, the whole nine yards. The stripper did a good job, but ever try to sand spindles off the lathe..... A FREAK'N NIGHTMARE. In the end, here is...
  20. T

    Tom's Jet spindle sander (att: buyer)

    To the person who bought the Jet spindle sander that Tom H was selling. I have decided that you have buyers remorse and I am here to help:wink_smil. I am just the guy to help you out. Please let me know who and where you are and I will be right over to make you feel better by removing the sander...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top