spindle

  1. B

    Where to buy spindle turning blanks

    Hello, I wanted to get some opinions on places (local or online) to buy domestic/exotic kiln-dried spindle blanks. I have bought quite a few from the Raleigh Woodcraft, almost all fully encased in wax and most with MC above 20%. I am wanting to find a place that sells blanks that are already...
  2. Flip-top dual stander stand

    Flip-top dual stander stand

    The disk / belt sander.
  3. Flip-top dual stander stand

    Flip-top dual stander stand

    The oscillating belt and spindle sander.
  4. Flip-top dual stander stand

    Flip-top dual stander stand

    Simple rotating stops holds the rotating top in either position.
  5. Flip-top dual stander stand

    Flip-top dual stander stand

    The electrical setup for the stand. With the cords carefully fastened in place, I can flip between the two without the cords becoming tangled.
  6. Flip-top dual stander stand

    Flip-top dual stander stand

    Dust collection setup for the oscillating belt and spindle sander.
  7. Flip-top dual stander stand

    Flip-top dual stander stand

    Dust collection arrangement for the disk/belt sander.
  8. Flip-top dual stander stand

    Flip-top dual stander stand

    The drawer provides plenty of space for the accessories and spare parts for both sanders.
  9. Flip-top dual stander stand

    Flip-top dual stander stand

    The top pivots on dowels driven into the rotating top through holes in the sides. A small section of PVC pipe serves as a bearing.
  10. Flip-top dual stander stand

    Flip-top dual stander stand

  11. Flip-top dual stander stand

    Flip-top dual stander stand

  12. Bent Spindle Screw

    Bent Spindle Screw

    Bent spindle screw from my Delta LA200 Lathe
  13. Flute Maker

    Spindle Steady

    I need a good spindle steady for my Jet 1442vs. I could make one but am just looking for right now....Woodcraft has this one http://www.woodcraft.com/Product/2005000/5652/Spindle-Steady-Rest.aspx It is heavy cast iron but would rather have a solid steel one ...Anyone ever use this one or have...
  14. Tommy Smith

    Lathe Spindle Taps

    Watching a pepper mill making video this weekend I noticed the guy was using a really nice wooden chuck he had made. I inquired about it and he told me where to order the tap..this is probably old stuff to most of you but I thought I would share the website for anyone that might want to give it...
  15. F

    Preferred glue to assemble bed with lots of spindles?

    I'm going to need something with a long open time, as I've got a 98 glue joints to assemble at one time, unless I try to do this up in pieces. I've got a feeling that might be the way I head, but I'll need to make some assembly jigs to do that to keep everything square. This is for a...
  16. W

    lathe spindle size

    I recently bought an old atlas/craftsman lathe. I am trying to find a chuck for it and I have measured the spindle which is 1" with 9 tpi. Have any of you heard of this size? I can't find a chuck that size. Or did I count threads wrong. I have found a ton of 1" with 8 tpi. I am away from...
  17. Truefire

    1"x 8 tpi spindle tap question

    I am looking to purchase a 1"x8 tpi spindle tap that is designed to be used for wood and is made or marketed by Beall. I was wondering if the tap was by chance designed to work with a 1" forstner bit for if this tap is designed like all other taps of course an undersized drill size would be...
  18. W

    Spindle sander

    In the market to buy one, but need advice. What should I buy? Rigid gets good reviews as does the Delta. Any help from you all would br appreciated. Am a hobbyist so don't need industrial strength one. thanx for any help/ Need pros and cons .
  19. Martin Roper

    Ryobi Oscillating Spindle Sander - $40 (Chapel Hill)

    Not mine. ====================================== Date: 2011-03-13, 4:12PM EDT Reply to: sale-by9zf-2263399958@craigslist.org [Errors when replying to ads?] Ryobi Oscillating Spindle Sander OSS450 for sale with bench Excellent condition. Location: Chapel Hill it's NOT ok to contact...
  20. C

    Delta 22-650 13" Planer Spindle Nut

    I'm in the process of cleaning up a 80's Delta 22-650 13" planer. I didn't see it when I bought it, but it is missing one of the spindle nuts. It is the nut that screws onto the the threaded rod and attaches to the upper casting. Of course, this item is now obsolete and I can't find one. I've...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top