finally

  1. gesiak

    Finally got the heater working and turned a few XMAS presents

    Well that last couple of week have been a bit cold up here (just outside of Chicago).... well for you folks in NC you'd say frigid. After several trips to the hardware store for some pipe, elbows I got the old garage heater replaced. The garage is a warm 65 degrees while the outside is under 25...
    • gesiak
    • Thread
    • finally heater presents turned working xmas
    • Replies: 6
    • Forum: Woodturning
  2. Bryan S

    Finally some Shop Time! Felt soooo good.

    For the last few months I have had to put so much effort into school work for the semester shop time has been litterally non-existant, btw by the time I finish my degree I may be retirement age. Today was the first Friday in months that I did not have a test to take, have a deadline on an...
  3. flatheadfisher

    Finally, A Small Project & Saw Question

    My first four projects were pretty large and I am excited about starting a smaller project that I can finish in a couple of days. I saw the thread about cutting boards and link to a Woodwhisperer video and thought I'd give it a try. I want to make some butcher block counter tops for our...
  4. M

    Finally Built Something

    Well after being a member for over a year seems like a good a time as any to try to post a pic of a recent project. Seems the past year has been spent on remodel projects at work, setting up shop,acquiring tools, and trying to learn from the braintrust here. Here is a mantel I built for a friend...
  5. TracyP

    I think I finally got it, CA finish that is

    I spent part of my weekend in the shop with my son, "02 Ranger on this site". We spent most of Saturday running, visiting other ncww members "thesource" at his business. Also ran into "woodman2k" there. Then it was off to woodcraft in Matthews for pen supplies. We got back home about 6:00 PM...
  6. 5Etek-mike

    Antique cedar wardrobe finally refinished

    Thank you all for allowing me to share this recent project with you. This wouldn't have been possible without the great help of Mac (Skysharks)!! :occasion1:icon_thum:eusa_clap:eusa_clap Mac invited my wife and I over to his tremendous shop last weekend to assist us with repairing one of...
    • 5Etek-mike
    • Thread
    • antique cedar finally refinished wardrobe
    • Replies: 14
    • Forum: Finishing
  7. FredP

    finally finishe the ash hall table

    you know the one with blood on its hands?:rotflm: more pics is my gallery fred
  8. SkintKnuckle

    Finally finished the sofa table

    I've been working on this for several months, along with several other projects, it's finally finished. The top is lacewood, zebra wood trimmed in some really light hard maple and plain mahogany. The legs and aprons are figured mahogany trimmed in some more maple and some walnut scraps. I...
  9. Bryan S

    Entertainment Center finally done

    Feels like its been forever since I started this (April) but after many delays and plenty of goofs to stop and fix along the way I finally got the finished product. It was based on plans from Woodsmith with some design chanes to suit my taste and space requirements. Uploaded thes pics today more...
  10. Trent Mason

    FINALLY, a little shop!

    Hi everyone, I haven't been on here as much in the past few months, but I always think about you all. About a month ago, I moved into more of a permanent place to live down here at the beach. Since then, everytime I get home, there is someone to talk to or something to do, whether it be...
  11. Bas

    Bird cage cabinet - finally DONE

    It took a bit longer than expected (as always...), but the cabinet is finally assembled, finished and installed. Overall, it came out pretty well. I'm very happy with the overall construction. The finishing was so so. Spraying latex was not terribly successful, and I spent far too much time on...
  12. Glennbear

    Finally!!!

    Several months ago I got a deal on a DW735 planer but it has been sitting in the box until yesterday. I mounted it on a Ryobi miter saw stand and it is working out excactly as I planned :gar-Bi The planer and mounting platform slide on the rails, and the outfeed supports are extendable so I have...
  13. dino drosas

    Bathroom Vanity Finally Finished

    Today the remaining hardware that has been ordered for some time finally arrived and I was able to complete my bathroom vanity projest. It is built from solid cherry with Lacewood panels and the drawers and doors are banded with African Blackwood. The finish is two coats of amber shellac, then...
  14. sawduster

    I finally built something!

    The Shoppe Widow has a pretty nice little herb garden and she wanted a place to sit in it. she didn't want it pretty and polished , but rough and rustic . Right up my alley as nothing had to fit too perfectly. It is all walnut and may not even last the season, but it is sturdy ( i jumped up and...
  15. meika123

    Finally finished

    At long last, I finally finished my Cyclone shed this afternoon. With the exception of a little trim painting, which I simply "HATE" the thing is finished. The cyclone is installed, only need to add the blower motor and impeller, and hook up the duct work, and this "BABY" will be ready to go...
  16. Mike Gilley

    Garden Bench FINALLY finished.

    Ok, so I started this project a while ago, but had to keep putting it on hold, until I decided I was going to have it done by the end of Memorial day weekend! So I started with some Cypress I got from Ivey in December: (Don't worry, I didn't use ALL of it for this bench) I built the...
  17. Hook

    Finally finished the Tiger

    And then I cut some grass for the tiger - first time trying stack cutting (thanks for the tips guys) And finally decided to crouch the tiger behind the grass (saving the other grass for the leopard) I've been a little busy this weekend. :clock:
  18. W

    Finally My Gloat!

    Well here's proof that yes there was finally and end to my Rikon BS saga.Set it up last nite and it is perfect.What an improvement over my other saw and definitely better than the first Rikon.
  19. TracyP

    End Tables: Finally Done!!

    I spent some of the weekend working on the end tables I Have been planning for months. I got a lot done this weekend. I have the cases built and the tops cut to size. The only things that I have left to do is build the bases and drawers and attach the tops. Then of course comes the door...
  20. Glennbear

    Wood gloat - finally home !!!

    Over a year ago while I was in the process of decluttering my NJ house so I could market it I was given the chance to obtain some heart pine bleacher wood to recycle. These boards were 20' long by a full 1" thick of varying widths. Unfortunately I had to cut them down so I could place them in my...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top