finally

  1. ScottM

    Finally

    It is now offfical. After 5 + long years, a few major headaches :BangHead: and not to mention lots of $$$$ my youngest daughter will be graduating from UNCP on Saturday. I am looking forward to a few more $$$ in my check book. On the down side there goes the peace and quiet of our empty nest...
  2. sawduster

    Finally done !!

    I have been working off and on for 6 weeks with this project The lady who commissioned this has a father who is a woodworker and she thought a portrait of an old photo of him and his friends would be a good Father's Day gift . It still isn't " finished " , right now it only has one coat of BLO...
  3. mshel

    Finally got the beast running

    Thanks to the help of C Powell, I finally got my Saylor Beall compressor up and running. I purchased this off Craigs list sometime last fall, sans a motor for $125.00 ( 5 hp 2 stage / 60 gal horizontal tank model) This is a stock photo which looks very much like mine. I had to purchase...
  4. J

    Finally maxed out my mill

    Well been waiting for just the right sized log to max out my woodmizer. I hit the limit today with around a 40" small end Pecan log. Pecan is member of the Hickory family and pretty rough on bands, it'll set bands on fire. I had to sharpen a few bands to almost a 0 degree hook angle, with...
    • jeff...
    • Thread
    • finally maxed mill
    • Replies: 14
    • Forum: Wood
  5. meika123

    Finally Started

    Got started building my closet for my Cyclone which will be completed soon. I'm building it 5' x 6' and attaching it right to the side of my shop. Should be complete by next Saturday, depending on the amount of shop time I am able to get in this week.
  6. Ncdawgs1882

    Finally Finished the Koi Fish

    This one took me a while but really wasn't that hard! I like the way the wood grain looks like the water! Dave O tell me if you think one of your customers would like this!?!
  7. cskipper

    Sailing Away - finally finished

    This is one of those patterns that you see and think - someday I will feel confident enough to cut that. Well, I thought I was but found it very frustrating- not sure why. Anyway, at least it's cut. The first is cut from Walnut, the second Baltic Birch. The third is just a top view of the clouds...
  8. RandyJ

    Finally turned another pen!

    Haven't had much shop time lately. Here's my feeble attempt at another acrylic pen AND photography!:roll: It's Mother of Pearl with a Satin Pearl Kit. Both pics are the same pen w/different backgrounds. What can I do to improve the pics? (I know only more practice will help the pen turnings)...
  9. Gotcha6

    Well, FINALLY!

    First of all, thanks to all the guys here who helped me figure out AOL sucks. Knew it all along but just not as well. I finally got pics & descrips posted in my album of my shop progress. I hope to show you guys some real progress in the next few weeks.
  10. TracyP

    Finally a wood gloat

    This is my first official "after joining" gloat. Went and picked up lumber from Internet Lumber today. 100 bf of 4/ 4 ash for end tables for LOML. They threw in the smaller widths for free. Just wanted to post a real gloat. This will be my first attempt at a hardwood project so wish me luck...
    • TracyP
    • Thread
    • finally gloat wood
    • Replies: 19
    • Forum: Wood
  11. TimRice

    UL to require Riving Knives on all new Table Saw designs (finally!)

    I just received the latest edition of Woodsmith, and tucked into it was a one page article about new table saws being required to have Riving Knives rather than just splitters to carry the UL listing. :eusa_clap
  12. MikeH

    GLOAT: I finally have a planer!!!

    Yesterday I took a trip up to Pfafftown and met jtodd71 (also known as Jon) and picked up an awesome Dewalt 735 planer. Thank you Jon!!! He also gave me the nickel tour of his shop and we talked for a while about dust collection, air filters and of course his new 15" planer. What a nice piece...
  13. mburke911

    Another project finally done!

    Hello, Well I finally finished another project I have been working on for some time. The LOML asked me tile the floor in and to build in some cabinets, storage and a bench seat for use as a mud room. It has taken awhile but here it is. Because of the size of the room I couldn’t get the entire...
  14. ashley_phil

    Finally ...more pens turning!

    I posted (4) months ago about turning my first pen. Why do I remember the exact date, well as you might recall my daughter was born a few hours later. I really got the itch and with the new arrival I just haven't had the time in the shop I'd like. Plus I quickly realized setting the lathe up...
  15. jglord

    Raleigh Woodcraft Ready - Finally!!

    We made it through our last two inspections today and will be open tomorrow - December 4 at 9 AM. :eusa_danc:eusa_danc:eusa_danc Our hours will be: 9 AM - 9 PM Monday through Friday, 9 AM - 6 PM Saturday, 12 AM - 5 PM Sunday. We'll be closing at 4 PM on Monday 12/24, and return to regular...
  16. Phil in Apex

    My biggest woodworking project ever is finally complete!!!

    It only took 2500 board feet of lumber, 30 bags of concrete (The 80lb variety), 45 pounds of screws and nails, 75 of the 5/8" Galvanized bolts, A few sawblades and drill bits, four months, and a very patient wife. The deck is done... I pretty much did the whole thing by myself with a bit of...
  17. sawduster

    Finally done

    Been working on making this pattern for some time . Finally got it done and cut it over the weekend I stack cut 4 , one each of maple, cherry, mahogany, and red oak ply This is the maple one Thanx for lookin' :-D
  18. skysharks

    Finally Got a fix for my Bandsaw

    Hey all If you would remember back to my problem with the Carter Bearings upgrade to my Grizzly Band saw. http://www.ncwoodworker.net/forums/showthread.php?t=10412 Well after a dozen or so emails with pics and phone conversations with Carter techs, I took the ball back into my court. These...
  19. A

    Finally getting back to woodworking!

    Finally getting back to woodworking and actually spent some time in the shop yesterday and today. I finally finished reassembling my jointer and installing the Shelix!!! First, though, I replaced two small parts that had probably broken when I got the jointer a few years back- little cast...
  20. WoodWrangler

    Horses Finally Done! Well, Almost

    An update to the original thread (http://www.ncwoodworker.net/forums/showthread.php?t=9196&highlight=horse), the horses are pretty much done ... ears, hair and all! :eusa_danc Getting ready to be sprayed ... Hailey enjoying a ride ... Now onto something else ... but what? :eusa_thin

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top