drill

  1. wannabe1-2

    DeWalt 14.4v drill at Lowes $99.97

    I just bought a 14.4v compact drill/driver with case, 2 batteries & charger at Lowe's in Laurinburg. Regular price is 179.00 & it is on sale for 99.97. I have batteries going bad on my old one & you can't buy 2 batteries for that. There was one left in Laurinburg, I called Rockingham & they have...
  2. Canuck

    Twist Drill Bit Sharpening Help

    Is there anyone out there in the Cary, Apex, Holly Springs area who uses the Drill Doctor? I have a 9.7 MM drill bit that I use in my doweling jig that really needs a renewed edge. It has just been used to drill dowel holes in a LOT of red and white oak but seems to working way too hard and I...
  3. J

    Hitachi 14v drill and flashlight - $40 not mine

    Hitachi 14v drill and flashlight - $40 (youngsville/louisburg) Date: 2010-08-06, 1:10PM EDT Reply to: sale-gv3pg-1884163512@craigslist.org [Errors when replying to ads?] I have a 3 month old Hitachi battery powered drill. It is in almost new condition. I have several others and no longer...
  4. S

    Drill press with laser, useful?

    I have not used a drill press with a laser before. Are the really useful or more of a gimmick?
  5. J

    Delta 14" Drill Press - Floor Standing - $60 not mine

    Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or any promise of transaction protection/certification/guarantee. More info Delta 14" Drill Press - Floor Standing - $60 (N. Durham) Date...
  6. sawduster

    drill chuck for my lathe

    i have a couple of old drills ......one cordless, one electric . I need a drill chuck for the headstock of my lathe . before I start breaking casings apart, is this doable or not worth the trouble ? :dontknow: Remember , i am member-in-good-standing of Glennbear's cheapskate frugal club
  7. Glennbear

    CPSC Drill Press Recall

    I have never heard of this retailer or brand but just in case anyone owns one of these machines the CPSC has issued a recall: Southern Technologies Recalls Drill Presses Due to Shock Hazard WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named...
  8. J

    Peachtree Drill Press Dust Collector

    I got an email from Peachtree about this if anyone is interested. http://www.ptreeusa.com/edirect_062510.htm
  9. S

    102 piece drill bit set $9.97

    In Lowes the other day and saw this. Went ahead and got it since I needed some new bits anyways. The small bits have 3-4 of the same size if your prone to breaking them like I am...
  10. Y

    15'' Porter Cable Drill Press

    Another new toy, I mean tool. I just bought a 15'' porter cable drill press (floor model) I am impressed. Depth stop is great, power is great. Thought I would never need a laser for a drill press, but it makes life easier. A breeze to set up right out of the box everything spot on. Thumbs up...
  11. CatButler

    Schroeder Egg beater drill

    I bought the drill mentioned in this thread http://www.ncwoodworker.net/forums/f77/schroeder-hand-eggbeater-drill-31536/ I give it a B rating. It comes with a 1/2, 3 jaw chuck which is a big plus. It grips the bit pretty when. It has 2 sets of gear speeds 1:5.5 turns and 1:2.25 turns. I...
    • CatButler
    • Thread
    • beater drill egg schroeder
    • Replies: 2
    • Forum: Reviews
  12. G

    Remove bit from Dewalt cordless impact drill

    All, I have the Dewalt DC825 cordless impact drill that has a quick release chuck. The only problem is I cannot get the bit out of it. It should pull forward to release the bit but I cannot pull it forward. Has anyone else had this problem and know how to resolve it? Thanks.
  13. FredP

    testing the cordless drill waters.

    I have a line on a bunch of brand new in the box cordless drill drivers. I will hopefully pick these up tomorrow. I will be selling them at well below retail. NO they are NOT hot! they are Metabo brand. some of you may not recognize the name but others here will. these are professional grade...
  14. zapdafish

    tuning a drill press question

    I was given this drill press and haven't really used it much. The wheels on the base are very hard to maneuver and I always feel like its about to tip over when I move it. I wan't to build a new base for it but there is something out of alignment with the drill press and am wondering if its...
  15. CarvedTones

    need to drill a 2" hole 11" from edge - DONE with pictures

    and it needs to be perfectly perpendicular to the surface. I am working on an abandoned treadle lathe project and I may have finally stumbled on the main reason why it was abandoned. The center hole in the flywheel is not square to the surface. I expanded it concentrically to fit bearings...
  16. CatButler

    Schroeder Hand (eggbeater) Drill

    Not sure if this is a good product or not. TraditionalWoodworker.com sells it for $110 http://www.traditionalwoodworker.com/product_info.php/cPath/269_335/products_id/1933 Sears.com is selling it for $65 and if you look around, you can find some online coupons to knock off another $10...
  17. SubGuy

    Drill Press Issues!?!?

    Ok, so I bought some 3x3x12 Purpleheart turning stock to make some more of those "Cube in Cube's" (well Cube in Cube in Cube). I have a no name 1/5hp benchtop 3 speed drill press. I'm having a couple issues. I can't cut the end grain of the Purpleheart with a 2" forstner (brand new from...
  18. dwg426

    Using Table Top Drill Press

    Hi Guys, I am in the process of building two sets of bunkbeds. So I have a lot of holes to drill. I have a table top drill press and was wanting some advice on a couple things. 1. The best way to secure the drill press to the bench. I have plenty of bench and work table space made from 3/4...
  19. Mike Davis

    Brace drill?

    Anybody ever seen one of these? I have a sneaking suspicion it is Photoshopped.
  20. scsmith42

    SDS Max hammer drill bit?

    Does anybody in the Raleigh area have a large SDS MaX hammer drill bit that I may be able to borrow? I have a large Hilti hammer drill, but need to drill a hole no less than 1" diameter (and I can go up to 1-5/8") at least 18" deep. McMaster Carr sells the bit that I need for about $150.00...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top