joint

  1. rococojo

    The Hounch Joint

    *...
  2. M

    Making the Strongest Joint

    I am in the midst of an outdoor (commissioned) project for a branch of UNC-Asheville called the Kellogg Center for Craft, Creativity and Design -- two outdoor Bulletin Board Kiosks I designed for the entrances to their public Art Trails. You'll notice the large doors that cover the bulletin...
  3. PeteM

    Shaker Step Stool & a New Joint !

    Those of you who were on the Charlotte Crawl saw this WIP on my workbench. Here's the finished product" Nice huh! But why did he dowel those nice hand cut dovetails??? Well, I'm a pins first guy and the first side came out pretty good. Half way through the second side I realized I had the...
  4. Bas

    Lock Rabbet joint

    I'm making a drawer, out of 3/4" plywood. As part of my continued education, I want to use a lock rabbet joint, since I've never done that one before. I want to use the table saw, since my my box joint blade does both 1/4" and 3/8" cuts. I found a great video on the Wood Magazine web site, but...
  5. Jim Murphy

    To joint, or to plane?

    I'm about a month away from my Ivey-Cypress® being dry enough to transmogrify into Adirondack chairs. Whilst pre-planning my attack strategery (Bushism) I'm wondering if I need to waste my time (and blades) jointing. Since 8" jointer blades are significantly more expensive and difficult to...
  6. D

    joint strength

    Hello, I have some questions about joint strength, and specifically options about glued joints, vs. mechanical means, etc. Just got several videos, one of which is "Forgotten Hand Tools" by Christopher Schwarz. In this DVD he discusses the drawbored mortice and tenon and how modern...
  7. jonnyfontaine

    how to properly joint two boards with hand planes

    what's the proper technique for edge jointing two 8/4 boards with a hand plane? the widest plane iron i have is 2" with a slight crown, or camber to it... would this work or is it best to have a squared iron? i've jointed boards that when clamped together were still thinner than 2" but i'm not...
  8. B

    MLCS Joint Making Videos

    Got an email from MLCS today...it led to videos on making joints with router bits and thought some of you might want to watch the how to videos... http://www.mlcswoodworking.com/shopsite_sc/store/ec080123.html Enjoy, Bill
  9. air force 1

    3 Box Joint Jigs in a 3/4"x24"PVC pipe

    I was having coffee this morning and had a brain storm. You see all them jigs in your shop, what if you could put three of them in a 3/4" PVC pipe about 24" long? And mount them on the side of your router table. Go down to the hardwear store and buy three square rods, 1/2" - 3/8" and 1/4" (or...
  10. Tom Dunn

    Simple drawer joint

    I would like to make a small nest of drawers. Nothing fancy, more for parts/junk than for "furniture". Drawers would be about 6" square, 2-1/2" deep. I'm wondering about what I might use for a simple, strong joint for fastening the drawer fronts to the sides. Emphasis on...
  11. K

    Joint seperation question

    As a new member I was reading old threads, just to develope a feel for the forum, when I ran across a closed thread concerning joint sepration in a walnut secretary. The issue of seperation with a cross grain joint was straight forward. The question I have concerned the comments on seperation...
  12. DaveO

    Sycamore slab joining - a joint project

    Jeff... and Dozer came over to my shop today to join the two rough sawn slabs of Sycamore, Jeff... had to make the beginnings of a natural slab table. We started by rough cutting the chainsawn edges straight with a cir. saw and straight edge. Then they were run across the jointer to make them...
  13. L

    Joint separation, why?

    I am noticing some separation of wood with my walnut secretary. I hope it is lack of moisture in the house and that it will return to normal come spring. If that isn't a shared opinion of my fellow woodworkers would you let me know what you think. These joints were together during the...
  14. smessick

    End to Side Finger Joint

    I have made a few chests in which the ends are grain oriented north and south and the front/back is oriented east and west. I was tempted to try a finger joint but couldn't come across anything here or in my literature or Googling about doing this. Anybody out there done it or seen it? Any...
  15. rick7938

    Lap joint vs Pocket Screws

    I want to build some cabinet doors that will have a flat panel insert. The doors will probably be no larger than 18" X 36". Which would be the preferable method to attach the rails to the stiles - Lap joints or Pocket Screws with plugs? I don't have the means yet to do good quality mortise and...
  16. S

    Another Joint Question

    :BangHead: I've been thinking....(dangerous I know)......If I rabbit the pieces, and seal the back of the seam with a watertight seal, and nail/screw the the seam to the center frame would it work....If you are wondering what I am rambiling on about, see my last post. I welcome all ideas or...
  17. S

    Need help with a joint problem???

    Hello, First of all, is it possible to purchase a sheet of 1/2" 12'X12" or 12'x8' treated plywood. If not, what is the best way to joint two pieces togeather to make a watertight seam so that I end up with a 12' piece with the seam running horizontally??? Thank you....
  18. Monty

    ShopNotes box joint jig [PICS]

    I've had the plans and hardware on my shelf to make this jig for months now. It's from ShopNotes, issue #8. Like most of my projects, it's been on back burner. This past weekend, someone in our local WW club brought in some great boxes, made with box joints. That motivated me to make the...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top