hollowing

  1. ashley_phil

    Hollowing systems

    I'm looking at these. I like the new one from Carter and have used the Vicmarc. Wondering what y'all have and suggestions/comments
  2. CrealBilly

    Hollowing with a router?

    How would you route something like this and stay constantly 3/4" from the edge? Hog it out with a forstner bit and drill press, finish with a index pin affixed to the router base? Or would you get midevil and whip out the hammer and chisels and skip the router all together? Obviously this was...
  3. flyrod444

    Kobra Hollowing system Test Run!

    Kobra test run! I've been hollowing free hand for a number of years now and decided it was time to look for a good hollowing system. I decided after much research into the subject that the Kobra was the best one on the market for my needs. There is a wait after you order one since they are...
  4. N

    Home made deep hollowing bar

    Seeing ScottS post about his homemade Ci rougher finally motivated me to finish my Ellsworth style deep hollowing bar. The handle is 26"x ~2" with 12" of 1/2" square stock. There is 6" of square stock in the handle. The bottom of the handle is oval for a more comfortable grip. I'll try this...
  5. Deep Hollowing Circle Cutter 2

    Deep Hollowing Circle Cutter 2

    • Nate Davey
    • Media item
    • 2 circle cutter deep hollowing
    • Comments: 0
    • Category: Member Galleries
  6. Deep Hollowing Circle Cutter

    Deep Hollowing Circle Cutter

    • Nate Davey
    • Media item
    • circle cutter deep hollowing
    • Comments: 0
    • Category: Member Galleries
  7. HOLLOWING PROJECT

    HOLLOWING PROJECT

    FIRST HOLLOW BOWL
    • efr
    • Media item
    • hollowing
    • Comments: 0
    • Category: Member Galleries
  8. W

    Elbo Hollowing Setup,Who Has One?

    I was wondering if anybody on the site has the Elbo Hollowing Setup.I would like to talk to you about it.Please PM me and maybe we can get together at the picnic. Thanx,Greg
  9. timf67

    Which Hollowing "System"?

    Thanks to Jeremy (Woodwrangler) I now have three lathes - talk about sinking (or is it drowning?) into the spinny blackhole! :help: Anyway, since I am not a metalworker and don't have the time anyway, i am looking at buying a hollowing rig/system/jig for my lathe(s). I am sure there are some...
  10. WoodWrangler

    Steady Rest #2 & Hollowing Rig

    I've really got to get turning ... and better yet, hollowing!:gar-La; This is a bit of a gloat, but also a little bragging about my neighbor Wesley and his capabilities... This is the second design for a steady rest that he's put together. This one uses a four-post design, tool-less arm...
  11. CarvedTones

    tapering jig for hollowing?

    Has anyone ever tried making one? I am looking into turning some woodwinds. With a few exceptions, the bores are not perfect cylinders, they are slightly conical. Guys that turn them for a living have reamers; lots of reamers, because different instruments and even different parts of some single...
  12. Lyle Jamieson Hollowing System

    Lyle Jamieson Hollowing System

    Jamieson Hollowing System
    • woodArtz
    • Media item
    • hollowing
    • Comments: 0
    • Album: Workshop
  13. jimwill48

    Made a New Tool - Shear Scraper,End Grain Hollowing or some such thing

    New tool I made today. its a Shear Scraper,End Grain Hollowing or some such thing. :roll: It has a 1/2" by 12" tool steel shaft, the tip is a Sorby Internal Round Scraper/Cutter and a Walnut Tool Handle James
    • jimwill48
    • Thread
    • end grain hollowing made scraper shear thing tool
    • Replies: 11
    • Forum: Woodturning
  14. jimwill48

    Two Styles of Oland Hollowing Tools

    Here are some photo's of some Oland Style Hollowing Tools I also have posted these on the Thread titled Hollowing Tools but thought I would also start a new thread on these.....james
  15. S

    Hollowing tools.

    Im thinking about buying some kind of hollowing tool but im not really sure which one to buy:dontknow:. What are your opinions on which to buy? Any help is aprecciated! :eusa_danc -Patrick
  16. flyrod444

    Maple hf and Making Hollowing Tools

    Here is another HF just finished. I was asked to go over the process of making your own hollowing tool so I will try. You can get M2 square cutting bits here for less than buck. I like to use 1/4" bit or samller. http://www.use-enco.com/CGI/INSRAR2?PMSECT=747&PMADID=SI0000053221&PMAVID=36 I then...
  17. DaveO

    Hollowing tool help

    A while ago I bought a Sorby swan-neck hollowing tool in hopes that I could start working on some open-form bowls and undercut rims. I can't make this thing cut worth a dang. Despite the instructions telling not to sharpen to a burr (because you don't want it to cut to aggressively) I have...
  18. Dusty Sawyer

    Hollowing Jig

    I noticed a hollowing jig plan in the downloads and was wondering if anyone had made it or has bought one? I've been wanting to know if there is an advantage over the Sorby gooseneck hollowing tool, for example.
  19. DaveO

    Hollowing out a bowl

    What do y'all think is the best way to hollow out a face grain bowl. From the inside out or outside in. If it makes any difference the bowl that I am going to start hollowing is Ambrosia Maple 8" dia and hopefully going to be about 3½" deep. I have a fingernail grind ½" bowl gouge and ½" scraper...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top