wide

  1. J

    Comming Soon to Wood, Wide Boards

    The next issue of Wood will have an article on jointing boards wider than 6" on a 6" jointer.
  2. zapdafish

    3/4" x 7" x 7' wide plywood strip

    I am hoping someone has a left over piece of 3/4" plywood in the Raleigh area that will provide 1-2 pieces, about 7 inches wide, about 6.5 - 7 ft long. I only need 1 but wont mind a backup piece. Willing to pay 1/6 - 1/3rd of the value of the plywood sheet depending on how many pieces are...
  3. S

    Thicknessing boards too wide for the planer

    I have some 1/4" x 15" x 60" boards I need to plane down to 1/8". This is fresh cut green lumber. I am guessing removing 1/8" with a hand plane would be a lot of work on a piece this big. Anyone ever try something like this with an electric hand plane, or is there a better way? Thanks for any...
  4. Flute Maker

    Need Wide Scraper

    I am looking to buy, make or swap (for metal to make or the scraper itself) for a wide scraper to use to bring the finial dimensions very close on flutes or spindles. I do the majority of the work with my Ewt rougher and it works really well. I just need something wide to have a good consistent...
  5. jaustin

    need some 12" wide boards

    Looking for a couple 12 " wideboards oak boards. Prefer kiln dried.
    • jaustin
    • Thread
    • boards need some 12 wide
    • Replies: 3
    • Forum: Wood
  6. S

    wide ash lumber

    I'm looking for knot-free ash at least 13" wide. If anyone could recommend a source I'd appreciate it. Thanks, Will
  7. Tarhead

    Cheap Wide Belt Sander...Really Cheap, Really Cool Idea

    I know you're bound to have clothes hanging on one of these in your bedroom or basement or taking up space in your garage. If not the Goodwill or Habitat RESTORE will have one. Get a piece of orphan granite from Craigslist and a belt of sandpaper to fit. Bob's yer uncle...
  8. MrAudio815

    G0490? Is the Bed really only 8" wide?

    Hello NCWW's I recently came into some money, What a super huge suprise~! :eusa_danc :notworthy: :banana: Anyway I have been looking into the G0490 jointer and noticed in another post that the bed is only 8" wide and Grizzly's website also says the same thing. So is it still possible to...
  9. R

    Need some wide thick cherry

    I am in the process of starting a rather large cherry linen press. The upper case will have two raised panel doors with the panels being about 20" wide each. I would love to make each of these out of bookmatched cherry. Does anyone know where I can find some 10/4 cherry at least 10" wide and...
  10. timf67

    Anyone need some WIDE double sided tape?

    The place I work laminates polishing pad material (honing/stropping) with PSA so that industrial customers can attach the pads to their polishers. We have a couple of small rolls of PSA that we are throwing out. Being the packrat I am, I hate to see stuff get thrown out. There are two rolls...
  11. Trent Mason

    need to rent wide belt sander

    Hello all, I have two poplar boards 8/4" x 9" x 6' and they are slightly bowed. I was wondering if anybody would let me run them through their WBS. :help: My alternative would be cutting them down into smaller pieces and running them across my jointer, but I'd rather just start with two big...
  12. NCPete

    37" Wide Belt Sander!!! $1000!

    Travis, this is for you! http://raleigh.craigslist.org/tls/1574467980.html Date: 2010-01-28, 9:12AM EST Reply to: sale-k6aub-1574467980@craigslist.org [Errors when replying to ads?] For Sale - AEM 37" wide belt sander from 1978. The sander is a work horse and gets used on a daily basis...
  13. S

    Wide Boards

    Today I picked up from a very generous neighbor approximately 118 bd ft of black walnut, 7 ft length, 5/4 thick and 216 bd ft of white oak, 8 ft length, 3/4 thick. :gar-La; Some of these boards are 18 inches wide, no knots. It has been stacked with 1" spacers between each layer in his barn...
    • Stanley
    • Thread
    • boards wide wide boards
    • Replies: 10
    • Forum: Wood
  14. The WoodButcher

    Short but wide Cherry

    One more post :gar-La; I just got some real nice cherry logs. The only thing is they are short. Like 4.5' and 5' long, However they are fat logs. right at 24"D if anybodys looking for some I have about 220BF. Selling for $19.95 BF:gar-La;. How does $1.85BF fresh off the log sound??
  15. C

    113bf bundle 4/4 Afr. Mahogany - WIDE boards

    113bf Afr. Mahogany 4/4 - kiln dried, surfaced 15/16, Select - all btw 14"-18" - $450.00 Shoot us an email for photos All kinds of other hardwoods available also! Great low prices - delivery available Give Bill or Gwen a call 864 325 9965 Carolina Lumber Sourcing info@lumbersourcing.com...
  16. EMC Wide Belt sander

    EMC Wide Belt sander

    It runs! Yee haw!!! Many thanks to Don Patterson for his assistance with the installation, DaveO for helping to Transport it, Rick DeNardo for selling it to me, Travis for making me aware that it was available for purchase, and Dino Drosas for starting the whole thing in motion!
    • scsmith42
    • Media item
    • 37" belt sander wide
    • Comments: 0
    • Album: QSO new Shop
  17. ScottM

    Wide belt sander

    For the folks in VA or along the border this might be a great deal: http://richmond.craigslist.org/tls/1238430893.html
  18. WoodWrangler

    SMC: Worksharp w/ Wide Blade Attachment $150

    NOT MINE, BUT A GOOD PRICE W/ THE ATTACHMENT http://www.sawmillcreek.org/showthread.php?t=110812 James K Peterson Location: Rincon, GA near Savannah...
  19. R

    planing a wide board?

    Anyone know of a shop where I might get a large slab of pecan planed? It's 21 1/4" wide x 2 3/4" thick x 77" long. It also needs to be cut to length. My planer is only 15" and my saws won't handle the thickness. Looking for a shop in the Wake, Franklin, Nash, Wilson Co. area.
  20. woodArtz

    Travelled far and wide for wood

    Yesterday, I braved the rain to track down some wood. First stop was Newton, where I met with new member Chris (liftnaleg1). Chris is a very nice fellow. We had a great visit and I got to see some of his turnings. He does great work. Chris promptly loaded my truck with some extremely nice cherry...
    • woodArtz
    • Thread
    • travelled wide wood
    • Replies: 12
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top