square

  1. IMG_01455

    IMG_01455

  2. chisel time

    chisel time

  3. cut a few more kerfs to make it easy to remove the waste

    cut a few more kerfs to make it easy to remove the waste

  4. use a backsaw to cut the sides

    use a backsaw to cut the sides

  5. mark/outline all edges

    mark/outline all edges

  6. IMG_01365

    IMG_01365

  7. IMG_01343

    IMG_01343

  8. IMG_01322

    IMG_01322

  9. IMG_01313

    IMG_01313

  10. IMG_01304

    IMG_01304

  11. IMG_01282

    IMG_01282

  12. IMG_01271

    IMG_01271

  13. IMG_01265

    IMG_01265

  14. PeteM

    $180 Framing Square ??????

    http://www.woodpeck.com/2616square.html?et_mid=442958&rid=3347635 Am I the only one that thinks the is crazy ??????? pete
  15. zapdafish

    attempt at a square bowl

    This is the bowl that soaked up alot of Danish oil. Im posting it now since it's gonna take forever for it to dry out before I can complete the finish. I dont have a bandsaw and didn't feel like turning off the corners to get the blank round before turning a bowl so Googled on how to turn a...
  16. P10100572

    P10100572

  17. Mike Davis

    Square problem

    I made some end panels for a cabinet. But when I measured and marked the end of the panel I couldn't get or confirm it square. I checked my old rusty trusty framing square and from each side it was different. So I used a 5 foot Starrett machinist's straight edge to check the sides of the panel...
  18. Mark Stewart

    Square edge bowl

    Hi all I have been trying to turn one of these buggers for 2 years fianaly to day made it all the way through. Some small cuts on the knuckles but all in all Me and the bowl are ok.:banana: not sure of the wood but the finish is blo/mineral sprits. Thanks for looking Mark
  19. Tarhead

    How would you cut a 2" square window into a fiber drum?

    Ethan Poole's modification here: has me thinking that I should do the same on my dust collection drum. The only problem is I'm using a fiber drum and I don't want to booger it up. How would you do this on a fiber drum? Drill then Jigsaw? (I know there are a few whiz bang full dust bin...
  20. Wolfpacker

    HF 12" combo square set

    Almost forgot !! I have another HF coupon that expires Thursday and don't know if it would be very useful or not. It's a 12" combo square set for $6.99, reg price is $9.99. If you have one, how useful do you find it ? I have a couple of framing squares and 12" regular sliding squares...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top