progress

  1. flatheadfisher

    Kitchen Countertop Progress

    Gees, planing this stuff by hand is tough! At least I am getting lots of practice sharpening the irons. I decided to go with edge grain instead of face grain for the section around the sink. That should help with the movement problem we were discussing in another thread. It isn't as pretty...
  2. Bigdog72

    New Miter Bench (In Progress)

    This project has been a long time comin'. It is basically the last piece of shop furniture I have left to build. I still need to build 15' of wall cabinet but that is for next week!! I started with the NYW design and modified to suit my space. Tomorrow I finish the tops, do the edge band and...
  3. WoodWrangler

    House/Kitchen Remodel - In Progress

    Well, it started as getting our badly beaten oak floors sanded down and refinished ... and turned into bit of a house update (taking it out of the 80's) and a kitchen remodel (on a budget). Though I'm not doing much of the work myself, I think it would be of interest to other...
  4. JackLeg

    Raffle Progress?

    Hey Guys: How's the raffle ticket sales going? NCWW gonna make any serious money (over $10) on this thing? :rotflm: Seriously, I hope this is going well and that the site will make some much needed "cake."
  5. T

    Gloat & kitchen cabinet progress

    With 3 commissions needing a good finish. I decided it was time to get a HVLP unit. I decided on the Earlex 5000 unit. I got a good price on an open box unit from Klingspor. So today armed with my new sprayer and a gallon of Target Coatings satin water based lacquer and white tint I sprayed the...
    • toolferone
    • Thread
    • cabinet gloat kitchen progress
    • Replies: 11
    • Forum: General Woodworking
  6. SteveColes

    Why Changes in progress??

    As I hope everyone knows, the main purpose of incorporating as a non-profit was to ensure that North Carolina Woodworker would continue in such a way that instead of depending on me to both finance and run the Corporation, the "members" would do it. Btw, in a few short months, we have come a...
  7. SteveColes

    Oh, Oh Changes in progress

    You'll start to see some changes going on. I will be playing with user titles and DQ and a few things like that. So don't worry until I finish. BUT, when I do things like this I usually screw something up and it takes a couple of minutes to fix.
  8. flatheadfisher

    Double Dresser Progress

    I "worked" most of the day on the double dresser but it really doesn't show on the dresser. I received the new Veritas #6 Foreplane I ordered yesterday and I spent some time getting to know it. This is my first good plane and I am amazed how much better it is than the Craftsman and Buck Bros...
  9. LeftyTom

    Gotta Make Progress, So I Can Start

    Well. LOML wants me to make an oak wallquilt hanger for her best friend. I scored the oak at the NCWW'er-only sale Jerry set up AUG8. I have one board sawn up (all pieces a bit long) and jointed. Project 1: I need my workbench free, so I can handcut the dovetails for the quilt hanger...
  10. Chuck Seehuetter

    Workshop Progress

    I know how much ya'all like pictures so Char & I thought we would post a few of the progress we are making on the new workshop. It is becoming more useable every day but we still have a long way to go. We finally got the workbenches/cabinets along the walls built. 2X6 SYP edge glued with...
  11. Jerome B

    Latest blanket chest in progress

    I'm in the middle of the last in the series of blanket chests. I hoped to have this one done by the SAPFM meeting on Wed, but I don't know if that is going to happen. Anyway at this point it is alive and kicking my .... So far I have done 18 mortises and I have 12 more to go (stiles). I...
  12. erasmussen

    Work in progress

    Before everyone went to the hospital, I had run into a force greater then the darkside force, she told me all darkside work will stop until her tv stand/cabinet is finished:no: I have the easy part done, the box, its all walnut the joints are all loose tenons (domino, well poor mans domino...
  13. 5Etek-mike

    Slow but stready progress with the armoire and wardrobe

    It feels great to finally share some pics with you all. When our time has permitted, Becky and I have been working between 2 different refinishing projects simultaniously (a large alder and birch armoire, and a 1930s/40ish cedar wardrobe.) We also have a 1955 Lane Cedar Chest that's waiting as...
  14. B

    Crib progress

    I posted a pic or two of some rough Cherry I had picked up and asked if you guys saw a crib in there some where. Well yesterday I got to the point of putting it together and thought I would share a couple pics of the progress. I still have to build or buy a platform for the mattress, haven't...
  15. Bryan S

    Entertainment center Progress

    I think I'm closing in on the short rows. Last week I mitered and mounted the base this week I cut and assembled the drawer and got the drawer mounted today. The drawer is going to have a false front and I decided to do a overlay instead of a flush mount drawer (at the suggestion of the LOML). I...
  16. welldigger

    WIP TV Stand progress

    Got the mitered/beveled molding and base on yesterday. Didn't get much shop time today because I had to dry out my truck. (I left a window down yesterday evening and let 2.68" of rain...
  17. adowden

    Nakashima Table Progress

    First I want to thank everyone who help me with the design of the table and the surfacing of the slab on the drum sander. I need all the help I can get. :wsmile: I wanted to include some pictures of my progress. Here is the picture of the sample base made of pine. Here is a picture of the...
  18. NZAPP1

    Week end progress and gold gloat

    This week end I completed 2 36 X 48 inch cabinets and 3 of the 4 doors :BangHead: it would have been 4 but I am 1 - 2-3/4 X 49 X 4/4 piece of maple :wconfused: and hung my air cleaner and finished attaching my draw fronts And NOW for the GLOAT I always thought the first GOLD in my...
  19. flyrod444

    Home shop in progress

    Hi, I started this shop last spring. I've done all the work on it except the slab and blocks. I had some friends over and we set the trusses by hand. The rest, I've done by my self. It is 26' x 34' with storage trusses that give me 34' x 12' x 6'-6" high second floor for storage. The trusses are...
  20. Bas

    Biscuits , Frames and Panels *MORE PROGRESS (and pictures)*

    I started a new project, this will be a cabinet to put my bird cage on (one of the legs broke off, and it's been resting on a piece of PT 2x4 for 6 months now....). The cabinet will have a big shelf for the kitty litterbox. I liked the episode on the Woodsmith Shop on making frames and panels...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top