place

  1. wdkits1

    Tobys Final Resting Place

    My Wife's cousin in NC had a cat ( Toby) that they have had for a number of years. As many of you know a pet is part of the family and we all mourn their passing. I was asked to create a small box for Toby's ashes. The Walnut box is 3" x 4" by 2.5 " deep with a removable back. The intarsia was...
  2. PeteM

    I stopped by Kyle's place and . . .

    this ended up in my garage :gar-Bi 100+ bf of walnut and some cherry. All 8/4 Kyle is doing well and has A LOT of walnut if anyone is interested. It's all green (mine read as 25% on my el cheapo meter) but very nice. Excellent price - If you're patient and have some space to put it give him...
    • PeteM
    • Thread
    • kyle place stopped
    • Replies: 8
    • Forum: Wood
  3. roweathers

    Looking for place to spray lacquer

    Yep, that's correct. I am looking for a location where I can spray some furniture pieces I made with lacquer paint. I learned the hardway that spraying this stuff in your basement workshop is a bad idea. Stunk up the house in a big way. I am either going to find a suitable place to spray the...
  4. S

    Hello Yall! Not sure I am in the right Place.

    :wink_smil Hello Yall! I think this is where I am suppose to introduce myself. I am a transplant from the MA no Florida.... I dabble in a little bit of everything but mainly try to stay out of the shop when hubby is in there working as LOL I will be asked to catch wood, sand or go-fer...
  5. TracyP

    Is there any interest in a dinner in Winston Salem? Place and time in first post!

    Mike Davis and myself have been talking tonight about getting a group together in a centrally located place in our area and the thought of Winston Salem came up. What we are proposing is that a group could get together the weekend of September 13. The thirteenth is on a Saturday, two Saturdays...
  6. rcflyer23

    Best place to get wood in the Charlotte Area

    I am new to this site, woodworking and the Charlotte area so I am trying to figure out where the best place is to get wood from in this area. Right now I am looking for mostly pine since I am doing a couple of country projects for the wife. I know lowes has a okay selection but I didn't know...
    • rcflyer23
    • Thread
    • area charlotte place wood
    • Replies: 8
    • Forum: Wood
  7. Tar Heel

    Durham lunch...time, date, and place has been set

    We will meet at Bullock's BBQ on Wednesday, Sept. 17th at 12 noon. The address is 3330 Quebec Dr., Durham, tel. 383-6202. It is located just off Hillsborough Rd. If you are coming into Durham on I-85 take the 15-501 exit to Chapel Hill. The first exit off Hwy 15-501 is Hillsborough Rd. Go to top...
  8. S

    best place to get drum sander sandpaper

    I recently acquired a US Made Delta 18-36 drum sander. Where is the best place to get sandpaper (for the drum and the conveyor) for it? Thanks, J PS: How 'bout that stealth gloat? :wink_smil
  9. C

    New to this place - Howdy to ya!

    Hello all Western NC here. Not too far from the Asheville airport in Henderson County. Have done wood working to some degree since my high school days - thanks to my dad's influence and a great shop teacher. Thanks Mr Taylor! Married, divorced - drifted away from my tools - got most back lol...
  10. WoodWrangler

    Best Place to Buy Crown Molding around Charlotte?

    Figured this would be the best place to ask ... where is the best place to buy crown molding around Charlotte? A buddy of mine wants to put crown in his house and I think the big box store prices seem a bit high.
  11. T

    Place to rent manual forklift / winch stacker

    All, I've got a large equipment swap-out from Grizzly looming so I'm looking for a little mechanical assistance to help ease the removal and replacement. Does anyone know of a equipment rental company that carries manual forklifts (aka winch stackers). I think it would be handy to have...
  12. G

    Not sure if this is the right place for this.....

    Guys is there a link (if there is I can't find it) that shows local (by zone) of local wood/tool/hardware suppliers? If mot can I create one?? Thanks!! Gene
  13. AndyET

    A Place to Sell Projects

    Hi, For quite a long time I have been interested in finding a place to sell projects that I make. I have discussed this with several woodworking friends, but have not been able to work out the details. Are any of you interested in doing a co-op project to open an "ART STUDIO" type retail...
  14. Splinter

    Adirondack Chairs in Place

    I have finally got my Adirondack chairs in place with a protective finish on them. The finish gave the cypress wood a nice look, eventhough they will weather with time. A neighbor came by on his boat and complimented me on the chairs and said twice that he wanted me to build him a set. I said...
  15. taandctran

    best place to buy exotic woods????

    I was woundering where the best place to buy exoctic woods were.... I only need small boards.. (18"x 6" x 1") or around that size, boards that size late me forever. I currently buy them on ebay but after shipping a $4 board cost $10. I am looking for a local place to buy just small amounts...
  16. M

    Meeting Place, Western NC WW Club

    Back in January, I posted a thread to solicit interest in forming a woodworking club to serve the western part of the state. Thus far, fifteen people have expressed interest and some of us think it is time to get together. This afternoon, I lined up an ideal location just outside of Asheville --...
    • McRabbet
    • Thread
    • club meeting place western
    • Replies: 3
    • Forum: User Announcements
  17. C

    Wow! What a great place!

    I am a self taught woodworker with a strong desire to get into design/build. Not much to say right now except thanks to who ever put this together and maitains this group.
  18. michaelgarner

    Hello everyone and god bless,,Glad I found this place

    Hello everyone, New user here but not new to woodworking, After graduating school I took an apprenticeship for 2 years with a local furniture maker. I learned a lot and then joined the army. Now im here in NC and am trying to set up my shop to start a custom cabinet and furniture shop when I...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top