motor

  1. boxxmaker

    Lookin for 1 to 2 hp elect motor

    I am looking for a GOOD 1 to 2 hp elect motor.110-220 doesn't matter for a bandsaw.PM me or email me boxxmaker1@aol.com
  2. CrealBilly

    AC Motor Bushings

    Anyone know a good source beside for google where I can find bushings for a small AC motor bushings that goes in a Fedders Window Air Conditioner? Thanks
  3. Pop

    Second generation wood motor from Pop

    Ok...I can never let anything alone... After finishing the first generation of the wood motor from the Steebar plans and almost completely redoing the plans to make them actually to scale, I added my own ideas to the second one I built. I tapered the fins, moved the drive motor to the small...
  4. CarvedTones

    capacitor for motor in Raleigh?

    I have an old 1/2 HP Craftsman motor (113.12010 if that means anything to anyone) that needs a new starting capacitor. I would like to pick it up locally if I can.
  5. Matt Schnurbusch

    Enclosing the motor on a contractor saw.

    I just looked at Eric's (cubicdissection) post regarding his new and improved dust collection for his saw. Really cool Eric. I didn't want to hijack his thread, but this is something that I have been giving some thought to recently. My only concern with Eric's design is what happens if (more...
  6. Trent Mason

    HF lathe motor burned up(?)

    Just got home from an insanely long day at work and started turning a bowl. I was smoothing out the outside and noticed that I was stalling the motor by making fairly light cuts. :icon_scra I KNOW I've made way heavier cuts than that and it has been fine. It also started making a funny...
  7. J

    AC Electric Motor Question

    I have a Bosch 4000 table saw whose manufacturer's specs quote 15A at 120V and a horsepower rating of 4. I've read many comments about ignoring the manufacturer's motor hp ratings because it is mainly a marketing gimmick which applies for a split-second only at motor startup. The true hp rating...
  8. Rob

    Lathe motor issue

    Seems my lathe motor will not start turning unless I give it some help. Being no electrician, I'm guessing I may have a bad capacitor? I'm making an assumption that it is inside the hump on the motor? Any way to check that to make sure?
  9. K

    linked belt for motor

    After spending way to long looking I finally called WWS to ask them where the linked belts could be found in their catalog. They no longer carry them. Anyone have another source?
  10. W

    Looking for a 2 hp motor.

    I'm looking for a 2 horsepower,56 frame,5/8 shaft ,3 phase motor for my woodfast lathe.I've checked some motor suppliers and there price is approx. 150% of what I paid for the lathe.If anybody knows of any places that deal in motors that are reasonable please let me know .I have a variable...
  11. Vanilla Gorilla

    Looking for a 1-2 hp electric motor

    Does anyone know where I can get a deal on a 1-2 hp electric motor? I want to build a thickness sander. I don't mind if the motor is rebuilt, I certainly don't mind if it's used, but I can't pay retail for the motor for the same reason I am trying to build the sander :slap: I'm sure amongst...
  12. Motor Grader

    Motor Grader

    I've recently added this to my farm equipment assortment.
    • scsmith42
    • Media item
    • grader motor
    • Comments: 0
    • Category: Member Galleries
  13. W

    Possible to Rervese the Rotational Direction of a Single Phase Electric Motor?

    Is it possible to reverse the rotational direction of a single phase electric motor? I know this can be done easiely with 3 phase motor by switching a pair of wires. But how about a single phase AC motor? Ideas are greatly appreciated:wsmile:. Qui
  14. gdoebs

    Motor turns on then off

    Hi guys, I just posted this over at the ClearVue forum but I thought I'd ask here too! I've been running my ducting around the shop and finally got to the point where I could turn on the cyclone and test it out on the table saw. Well, the motor cranks up, then slows down, then back up, then...
  15. MikeL

    Motor replacement for bandsaw?

    I have been trying to explore all of my options for upgrading my Ridgid 14" bandsaw. I've looked at common add-ons: link belt, riser block, guides, etc., but I was wondering how reasonable it would be to get a replacement motor. It currently has a 3/4 HP, and I'd like to boost that to 1.5 HP...
  16. FredP

    mini lathe motor?

    anyone know where to get a new motor for a fisch tuning center? i think the jet and delta use the same motor but i aint sure of that. mine has lost power and is easily stalled. :crybaby2: help!!!!!!!!!! fred
  17. L

    Bandsaw motor size

    I have an old sears 12" bandsaw that I have been using for a couple of years. It has 1/2 hp motor. It appears that the motor is shot so as I prepare to replace the motor my question concerns upgrading to a larger motor possibly 1hp. Pros and cons please. The reason would be for slicing...
  18. mshel

    Compressor motor rpm question

    If the compressor pump is rated at say 850 rpm, what should the motor rpm be to achieve this??? I know the combination of pump wheel diameter and the motor pulley figure into this but not sure how this all calculates. This is info for a potential gloat (maybe) so need some fast feedback...
  19. bluewing92

    Dead Motor. This just isn’t my week..

    First the capacitor on my Mini lathe burns up now the motor on my 80’s vintage Craftsman table saw (bought new in 1986) goes Tango Uniform. This is almost enough to make a man cry :crybaby2:or at least give up woodworking, :BangHead: maybe not. I know, I know, here we go again!!!:eusa_doh...
  20. H

    Phase Converter / Motor 10 HP

    In my shop in High Point I have a 10 Hp 3 Phase Motor, that I do not need. This Motor was on a 36" band saw. I wood prefer trading over selling EX WOOD :eusa_danc Green is OK / Clean Structural steel shorts / Sheet rock / ect. Steve Mc

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top