face

  1. FV

    FV

    • danmart77
    • Media item
    • face mortise vise
    • Comments: 0
    • Album: Workbench 2016
  2. Face vice built with pipe clamps

    Face vice built with pipe clamps

    • merrill77
    • Media item
    • clamp face pipe vice
    • Comments: 0
    • Album: Workbench build
  3. Face vice built with pipe clamps

    Face vice built with pipe clamps

    • merrill77
    • Media item
    • clamp face pipe vice
    • Comments: 0
    • Album: Workbench build
  4. S

    Hovarter Single Handle Custom Face Vise

    I've replaced the twin screw face vise on my Holtzapffel Bench with a Hovarter Single Handle Custom Face Vise from www.HovarterCustomVise.com. I wrote a quick review and posted two 20+ minute assembly/review video's on YouTube. Check you my blog if you're interested in a killer vise...
  5. Tim Sherwood

    Face frame beading advice needed

    I would like to add a bead to the inside edges of my cabinet face frames. I plan to use pocket screws for assembly. These will be cherry cabinets with a clear finish. I have read several articles about how to do it. They all look pretty time consuming. So far it looks like I might as well just...
  6. S

    Face Shield recommendation? Any to avoid?

    Looking for feedback/recommendations for a face shield for turning. Just the regular ol' shield is fine for me.... Example: http://www.woodcraft.com/Product/2080838/29193/Adjustable-Face-Shield.aspx I'm definitely not interested in air shields. I'd like to keep it under $25ish... Looking...
  7. R

    Face frame attachment

    What is the best way to attach a bookcase faceframe to the solid walnut carcase. There will be divided light doors attached so I am not sure glue only is the best way. I have a biscuit cutter but that seems like overkill, any suggestions would be appreciated. Rick
  8. bluchz

    Attaching cabinet face frames?

    I am making kitchen cabinets and am worried about how i decided to attach the face frames. I assembled the face frames using pocket screws. The face frames had rabbits in them to align with the cabinet boxes. and I then attached the face frames to the boxes with glue and brads. Now that i am...
  9. Joe Scharle

    Power vent face shields

    Would any of you folks who have one of these recommend a particular model?
  10. mbeach

    Jesus Face - Scroll Saw Work

    I saw a picture somewhere on here of a picture of Jesus' face (maybe had the crown of thorns).... I have looked and looked and cannot find it. Anyone know where this image is? Thanks Michael
  11. Mark Stewart

    Looking for a small face plate

    Hi guys and gals, I am looking for a small (3") 1x8tpi face plate for my HF lathe. I have a 6" and now im looking for a smaller one if anyone knows where Please let me know. Thanks Mark
  12. erasmussen

    A face plate on both ends?

    Tried a couple of new things Made some nice tight diamonds :eusa_danc And made my first Seedpot a full 12" diameter turned over the ways on my HF lathe It was made in 2 parts and married together, the woods are Mahogany, Padauk and YH Thanks for looking Sorry for the poor photos :elvis...
  13. First Mahogany Cut

    First Mahogany Cut

    Table or Desk Top Clock
    • Don Sorensen
    • Media item
    • clock face large
    • Comments: 0
    • Album: Past Projects
  14. C

    Face shields/protection

    From time to time the topic has come up but I think its worth revisiting. I also know that things change. What do YOU use to protect yourself when you turn? Eyes, Face, Respiratory, Hearing, etc. If you have something like a powered system (trend etc) what else do you use it for? How does it...
    • CaptnA
    • Thread
    • face shields or protection
    • Replies: 8
    • Forum: Woodturning
  15. walnutjerry

    A Face to Face meeting today

    with one of our members---------Philip Christy. It was a pleasure meeting Phillip today and giving him a very brief tour of my shop mess. Since he was on a tight schedule, we did not get to share lunch this time but the time he was here tells me he is truly a "gentleman". Thank you Phillip...
  16. sawduster

    Face Off

    Every once in awhile , I gotta do one just for me :mrgreen: Cherry ply Maple ply This one was pretty challenging and a lot of fun to do my pattern from public domain photo 8.5 x 11 #3 spiral BLO Thanx for lookin :mrgreen:
  17. W

    1" x 8 tpi Face Plate

    I have a face plate from Oneway,its a 4 inch model from my old Delta lathe that I need to sell or trade for the 1 1/4" x 8 version.If anybody has one of the larger face plates or needs a 1"x 8 face plate,let me know.I have some large platters to turn so I need to do some thing fast.Thanx
  18. V

    dumb question about cabinet face frames

    Hi, I hate to ask a question that will probably turn out to be really dumb, but here goes. I am making a cabinet, or actually an audio/video shelf unit. I made the carcass out of 3/4" oak plywood and now I want to make a face frame out of solid oak. For various reasons, I thought I would...
  19. RandyJ

    New name same old face! PappyJ bites the dust

    In keeping with the recommendations in the site policy, I have requested a name change from PappyJ to RandyJ. Now, if I could just find a cheap plastic surgeon, I'd be good as new:roll:!
    • RandyJ
    • Thread
    • bites dust face pappyj
    • Replies: 5
    • Forum: Who We Are
  20. ashley_phil

    Kid sized face shield?

    My son though he's only (2) is totally into everything I do. I'm not about to turn him loose turning, but I would feel more comfortable with him nearby if he had a face shield on. The one I just got from woodcraft is way too big to be practical. And the "toy" ones they sell I'm worried are...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top