taper

  1. CrealBilly

    Taper Jig

    Looking for a good taper jig for the TS - what's your experiences? Home made is better than store bought? Thanks
  2. W

    Duby taper jig

    Does anyone own one? Are they worth the price and where do you buy them? Have used homemade jigs and find them a bit clumsy. Thanx for any input.
  3. W

    Norm's Taper Jig

    Are there plans out there for Norm's taper jig? I have not been able to find any but do run across many references to his plans. I know there are a ton of plans out there, but am curious to evaluate his. if there is one. Thanks.
  4. S

    Rockler Taper Jig $60 - Rockler

    Rockler will be starting some BOGO's starting tomorrow as well! Killer deals, IMHO ( e.g. Buy PC 557 Biscuit Joiner, get PC 690 for @ $20, for a total @ $230) Free ship w/ $75 or more , no tax ! http://www.rockler.com/product.cfm?page=21731
  5. S

    55% off Dubby Taper Jig-Peachtree

    Limited to 200 units, get em while hot http://www.ptreeusa.com/edirect_010711.htm
  6. llucas

    Morse taper Jacobs chuck slips in tailstock

    Ok, so everyday I learn something new...usually by watching something go slightly wrong. This time it is the Morse taper Jacobs chuck slipping in the tailstock when I use it to drill out the center of a hollow form prior to turning the inside. The slipping is where the taper fits inside the...
    • llucas
    • Thread
    • chuck jacobs morse slips tailstock taper
    • Replies: 8
    • Forum: Woodturning
  7. WoodWrangler

    How do you cut a 4-Way Taper Leg

    I've cut a two-way taper leg, but now I'm need of a four-way taper. Any tips or suggestions on how to pull this off safely?
  8. D

    Peachtree taper jig 50% off

    http://www.ptreeusa.com/edirect_052909.htm anyone have any experience with this?
  9. T

    Why Jointers Taper Wood

    I have had this story "in the process" for over a year after getting a ton of emails over the years on this, seeing all sorts of goofy "cures" in some forums and being urged to write it by three tool manufacturers. One of the later called last Tuesday, related some numbers from his tech lines on...
  10. Joe Scharle

    Taper Sled

    Here's the GET STARTED for the taper jig: For ease of use, it is aligned on both sides with the blade. Simply set a mark to the edge, tighten the hold downs and cut. Tilt the blade away from the jig and make compound miters as well. The jig does NOT use the fence. Most table saws have...
  11. CarvedTones

    near perfect round taper

    Yeah, I know; it looks like I am posting in the wrong section. This is exactly what lathes were made for. But I don't have one. I may make a small one or get one of those tiny hobby ones for just this purpose, but for now, I am thinking about how to carve and/or sand to do it. Here's the...
  12. Joe Scharle

    Taper Jig

    Wayne, I thought I'd put it here in case anyone else is interested. I used the same miter track and offset methodolgy that we used with the Universal Table Saw jig so that I can cut from either side. It's 36" long to handle any 29" leg, while getting the track in the miter slot soonest! Joe
  13. WoodWrangler

    Morse Taper Sizes?

    Okay, a lathe newbie question ... what's the difference between the Morse Taper #1 and #2? And which one would fit my lathe, a Delta 1440? Maybe my Google searches stink, but I'm not finding the answer. I know someone here will know!
  14. mshel

    Taper jig

    Saw a posting on making a taper jig so I thought I would scribble up a pic of what I use. Nothing fancy but it works. Actually I have a couple of types I use but this is what I used on my auction table legs. The basic taper jig is just a piece of 1/2" ply with a hardwood "spring" to hold the...
  15. alleng

    taper jig for tablesaw

    any advice,or a plan for making a taper jig for my tablesaw? i know they are pretty cheap,but if i could make one from scraps i have that would be even better
  16. adowden

    Double taper planer jig

    A woodworking friend down the street asked me to search for any information about a planer jig that will do double tapers. He would rather use the planer because his leg width is 6". I couldn't find anything, and I was wondering if anyone has come across any information about this? Thanks.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top