part

  1. T

    Very little dresser (PART 2)

    I have offically started construction! Scroll down to see the progress. I am looking for a good reason to build this dresser. I found it at a refinishers business about 12 years ago and fell in love with it. The guy said it had about 7 coats of paint on it and had no idea what he would...
    • toolferone
    • Thread
    • dresser part started thoughts
    • Replies: 15
    • Forum: General Woodworking
  2. CrealBilly

    Read every part of your receipts

    FYI... I went to LOWES tonight and this came out on the bottom of the cash register. I'm not sure I fully understand what it's trying to tell me. Can some elaborate please.
  3. wdkits1

    My newest challenge Part 3--Mission Accomplished

    When I first took on this project I had my doubts whether or not I could get it to work. After doing a bit of research and finding some good photos of the original corn sheller it was obvious to me that this was going to be a fun little project which would test many of my skills. The only...
  4. Joe Scharle

    Chicken Coop - Part Deaux

    Got a chance to work on this today... View image in gallery View image in gallery View image in gallery View image in gallery View image in gallery
  5. M

    Old Delta/Rockwell jointer part

    I am looking for an infeed/outfeed table adjustment handwheel for an older Delta/Rockwell 37-315 8 inch jointer. Also would like to find an original metal stand for it. Any help or suggestions as to where I might find such a thing would be appreciated. I have checked ebay but have not found...
  6. Vetteman9956

    Unisaw Part 2

    As you may remember a few months ago, I posted a cabinet that I built for under my Unisaw, well I have completed the rest of it. Heres is the router table to go with it. Since my saw is a left tilt, I had to move the Bench dog to the far right instead of the left side where it was on my...
  7. dino drosas

    Shop time, Part 2

    I got back to work on the chest of drawers this morning and started machining the drawer dovetails. It was a bit cold but I did them outside because of so much dust. I do not have the dust attachment for the Leigh jig yet. View image in gallery Got all the parts machined and fit. Next come...
  8. R

    Google Sketchup Part Two Feb. 6

    Instructor: John Yurko Cost: $60 Bring a laptop loaded with Sketchup. Asheville Hardware/Asheville Woodworking School 91 Biltmore Ave. 828-252-8088 Email rob@ashevillehardware.com to register.
  9. steviegwood

    Bitten by table saw part 2

    Hi folks, just wanted to let everyone know that i have to go in for a second surgery on my hand on Friday. Something came loose in my index finger as i felt and heard it pop like cracking your knuckles yesterday. Now i have no movement or feeling in that finger at all. Be careful out there these...
  10. flyrod444

    An old chair replacement part.

    I was asked by a person who refinishes and repairs old furniture to make a replacement spindle for a chair he was working on. It is 19.5 inches long and very thin. I don't do a lot of spindle work, but was still able to get this one close, I think. A spindle steady would have been nice. Jack...
  11. JackLeg

    Olt 77 Part

    Do any of you guys who make duck calls have the mylar piece I could buy? I've lost the reed out of my old Olt 77 and I sure would like to get it back in service for this season. An Olt 77 is one of the easiest goose calls to blow, and I'd like to get her back to work. I If anyone has some...
  12. R

    Google Sketchup Part One

    At Asheville Woodworking School, 91 Biltmore Ave.: Google Sketchup Part One Oct. 31 Noon-4pm Cost: $60. Learn Google Sketchup, a free, downloadable program from Google for design of furniture and more. Learn quick keys, materials, layering, scenes, and section cuts. This class will help...
  13. Bigdog72

    Cutting Boards Part 2

    I am going to make some end grain cutting boards for Xmas using the "Wood Whisperer" method. I plan on using a combination of soft maple and cherry (this will be aesthetically pleasing according to some). I am asking for comments from those that have made cutting boards through the years so...
  14. timf67

    Learning Turning the Hard Way Part II

    A while back I posted a thread and pictures of my first bowl attempt and resulting blowout (or spoon rest:icon_thum) Anyway, I CA glued the biggest chunks back on and finished it like a "natural edge" bowl I then proceeded onto my second bowl - the one I roughed with a spindle...
    • timf67
    • Thread
    • hard learning part turning
    • Replies: 4
    • Forum: Woodturning
  15. shop_demo2

    shop_demo2

    • Bas
    • Media item
    • - demo deux part shop
    • Comments: 0
    • Album: New workshop
  16. ScottM

    Dust collector burn-out part 2

    I hate long treads so I started a new one. Here are a couple bad pictures of what cooked. I am thankful I caught it quickly. The Delta phone rep told me they will repair/replace. Interesting that she asked if there was any damaged to the building or other equipment and then asked if anyone...
  17. Gary K

    Kayak build part 2

    It has been a busy week, but I did find time to pick up the plywood and build the boxbeam spline that will hold the stations cut out last weekend. First step in my 12x24' shed...er..shop is to move things around so there is infeed and outfeed space for a full sheet of plywood. After checking...
  18. Gary K

    Kayak build part 1

    This kayak is for my daughter, it is a Storm SLT, the plans came from www.oneoceankayaks.com. Luckily today I had the help of my daughter Michelle. Hopefully, we will find the time to finish her boat before she goes back to college in August. We got started today by gluing the full size...
  19. wdkits1

    How I built my shop part 5

    My shop is now dried in and now it’s time to get the inside work done. I have installed all of the lighting, using 8’-2 tube fluorescents that I salvaged from a grocery store remodel and have put all the lights on motion sensors. All of the outlet circuits are in conduit run under the floor and...
  20. wdkits1

    How I built my shop part 3

    I encountered many challenges while building my shop. For one , I was still working full time at my electrical job and working out of town alot so I could only work on the shop during the weekends. Plus I was still processing orders for intarsia kits at the rental shop which meant that my...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top