large

  1. S

    Cutting and sanding large masonite boards?

    Hi all, I've been struggling to figure out how to cut some 4'x4' masonite panels to smaller sizes and sand the edges down so that they can be primed and used as painting canvases (up to 12"x12" and as small as 3"x3"). I've been using a standard table saw and hand sander, but it takes forever...
  2. D

    # of hinges on large frame & panel door?

    I'm building a cabinet with a face frame that will have two fairly large frame & panel doors. Each is ~ 17" by 60" and weighs 14 lbs. How many blum-type hinges will I need per door? The panels are veneered MDF and I plan on gluing them into the frame for strength, in addition to reinforcing the...
  3. timf67

    Large item from Charlotte to Ashville

    I am working on the sale of my bandsaw, and we would need a PE from Charlotte to Ashville. If anyone can help, please PM me.
  4. richlife

    Working with a Large Slab

    Well, hi all. I thought I'd exercise a little more of NCWW, get some help and generate some discussion. (Here's another place I could use some help: http://ncwoodworker.net/forums/f29/grill-case-32273/ .) As already has been said several times :eusa_danc, yesterday's Picnic was great and...
    • richlife
    • Thread
    • large slab working
    • Replies: 18
    • Forum: Wood
  5. flyrod444

    Large wood GLOAT!!!

    I have been looking at some very large silver maple trees in a yard for years, thinking it would be great to get some of the wood if they ever cut them down. While driving to work today I almost wrecked when I saw that they had been cut and the very very large butt cuts where laying where the...
  6. flyrod444

    Cut down a large maple today!

    I cut this monster down with 026 with a 18" bar. I used my saw with a 20" bar to cut the lead and some big limbs off and when I went to crank it again gas had leaked all over the place and it would not crank so I was left with the small saw to take this big old tree down. Luckly a friend was...
  7. Wolfpacker

    Large slabs

    Seeing Kyle Edwards avatar with that large slab reminded me of a place in Fletcher, NC that sells large slabs, burls, hardwood flooring, plywood and other stuff as well. I believe he buys overstocks, overruns and probably imports a lot of it. He's a wheeler/dealer and just has a warehouse full...
  8. woodworker2000

    Raleigh CL - Large Black Walnut Tree (on ground ready for milling)

    Found this on Raleigh CL and thought it might be of some interest to our sawmill owners or anyone with a portable mill. Link: http://raleigh.craigslist.org/mat/1615254279.html Black walnut tree (raleigh, down town) Date: 2010-02-24, 12:10AM EST Reply to: sale-csauy-1615254279@craigslist.org...
  9. SSuther

    Large Walnut and Cedar Trees Available

    I have a friend who asked me if I know anyone who'd be interested in 3 large walnut trees (36 inch diameter) and over 50 large cedars (20 inch) that he needs to have removed from land in Rowan County. Don't have any idea what $$s he's thinking, but I told him I'd post here and provide his...
  10. Sawdust Denny

    Workshop Home to Large Bug

    This is the first prototype of a grasshopper pull toy I want to start making for friends and relatives with small children. While I am pleased with the way this one turned out there are still a few bugs to work out. :rotflm: Although it is brown in color it is also "Green" since it was made from...
  11. steviegwood

    Need a Large Woodburner for Shop

    Hi Folks, does anyone know where I might find a large woodburner fo my shop. It is a 24' x 40' metal building that I am working on getting it insulated. I have a small stove in it now but it will not hold enough wood to hold fire overnight. What I am looking for does not need to be fancy just...
  12. flyrod444

    Worm Tracks 2 + one large bowl

    I just finished another HF from the last of the wood I had from worm tracks #1. It is a little larger than # 1. The second bowl is a large open form I turned from some ambrosia maple. It is 17" in dia. Thanks, Jack imageimage imageimage imageimage
  13. R

    Four FREE large square pianos 1850's - 1880's

    Hello All; I have just acquired 2 FREE early square pianos from the 1820's from the Warner Brothers Studios Warehouse in Burbank, CA. They are being picked up this afternoon, and will be here in 3 to 4 weeks. You can see the other post I made about these this morning in the "other" forum...
  14. D

    Large Tree Removal... went to the tub grinder

    We had a large tree removed. We live in the City of Charlotte and paid a fortue to have this tree removed. There is no market in Charlotte for 7.5 ton 6 foot sections of Willow Oak. No one wants to deal with the weight and worry about what fence, nails, cloths line pulley, etc... have grown...
    • DonnellyJT
    • Thread
    • grinder large removal tree tub
    • Replies: 10
    • Forum: Wood
  15. C

    Anyone turning things this large?

    Pretty cool stuff - http://www.virgiltreeart.com/TheProcess/tabid/400/Default.aspx http://www.rockler.com/blog/index.cfm/2009/4/30/Trunk-Show-The-Art-of-the-Tree
  16. CarvedTones

    How to treat a large tree slice?

    Paging Dragon... :) Other instruction welcome also of course. So I got this fresh cut slice of a cherry trunk about 2' in diameter and maybe 4" or so thick. I am really not sure what I am going to do with it. But I assume I should seal it now. I was thinking of painting it with exterior...
    • CarvedTones
    • Thread
    • large slice treat tree
    • Replies: 15
    • Forum: Wood
  17. Ray Smith's white oak

    Ray Smith's white oak

    13'6" circumference white oak that I will be milling this summer.
    • scsmith42
    • Media item
    • large oak tree white
    • Comments: 0
    • Category: Member Galleries
  18. bottom of turning

    bottom of turning

    • erasmussen
    • Media item
    • bottom large open segment turning
    • Comments: 0
    • Album: turnings
  19. large vase

    large vase

    • erasmussen
    • Media item
    • large open segment turning
    • Comments: 0
    • Album: turnings
  20. flyrod444

    HF from the large oak burl

    Here is the HF I turned from the same oak burl as the two nested sets. This burl has amazing pin burl grain in it. It is just over 8" in dia. by 7" tall. It is the first bark edge HF for me. I still have two large bowls drying that I cored off the bottom of the two nested sets so in all I got 14...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top