I'm looking for Jatoba or Teak near Lake Norman. I'm in Iron Station. I don't think Kyle Edwards has it. I'll only need 8 pieces 4/4 @ 2 1/4" W x 4' L
Where can I find exotics around charlotte?
I have recently acquired an old Stanley Bailey #5 plane that has the top missing off the handle; where is a good source for a replacement handle?
Thanks
Kilingspor has 8/4 and I need a strong 1" finished (too much waste from 8/4). It needs to be kiln dried. I am building a screen door for my sister. Anyone knows who has it?
Thanks.
Looking for 8/4, 5/4 and 4/4 rough locust. I am hoping to use over the winter to make several Adirondack chairs and a couple of garden benches. From what I read, it should last very well outdoors.
Lumber sources close to Richmond VA would be preferred.
I saw one posting on craigs list near...
I had been watching this scrollsaw on Raleigh CL for about two weeks. Price was dropping and I just had to check it out!
It turns out that the previous owners purchased it at a trade show, used it a couple of times and decided that it wasn't for them. The local son-in-law was selling for them...
Just jumped on a 2hp HF dust collector for $179 - 20% discount (how could I NOT buy it?) and I now need some 4" id hose to hook it to my tools.
I assume that some of the more expensive hoses have a smoother inside and are made of a heavier plastic but is there a good on-line or local...
I'm going to build my kids a playhouse for Their birthday. I want to put plywood siding or osb siding on the exterior, so the exterior will be a "one step" process. Anywhere know a place to buy this stuff that is cheaper then lowes or Home Depot? I think they want around $15-$20 for it there...
Can anyone recommend a reliable builder that does work in Willow Spring (Johnston County).
We have been having a real difficult time getting a commitment from the guy that built our house. We haven't been able to even get him on the phone for almost two weeks. We have called daily and left...
The 1st pic is the Pecan stump from those two pecan trees that I showed a while back and the other three are from an Oak stump a friend gave me that I ended up getting 6 slabs from,the small one is kinda thin ,but hope to make a mantle clock out of (maybe) and the other blanks( I hope) will end...
Anyone know where I might fine a set of 10 sleeves (1/4" to 4" diameter, most 9" long) for an oscillating spindle sander (like the Jet JVOS-10 (http://www.rockler.com/product.cfm?page=17155)
1/4" diameter x 5" long
3/8" diameter x 6" long
1/2" diameter x 6" long
5/8" diameter x 6" long...
Was Googling prices to get qty 8 of some 18" 562H BLums with Blumotion and stumbled on this apparently new cost reduced version. What is wierd is that the PN 562.4570B only googles at Blum and AHTurf. The main physical difference is the fixed profile of the stationary rail which would require...
Hey Folks,
My parents recently bought a vacation property near Boone, and I'd like to make them a sign for the front gate as part of their Christmas presents.
Being a vacation spot, I'd like to keep it non-formal, and I'd really like to get my hands on a couple live edge/ natural edge ERC...
Looking for "small" pieces (less than a full sheet) of plastic laminate int he Charlotte area.
I do not feel like purchasing an entire sheet from the big box store.
thanks
I'm building a home-made directional antenna to extend my home LAN to my new woodshop. I already have an external omni antenna at the house, and am in the process of building the antenna for the shop end.
I need an RP-TNC connector, and about 30' of a low loss coax such as LMR 400 or B 9913...
I can order it. Do any hardware chains or home building supplies stores carry this? :eusa_thin
I'm in the great city of Rocky Mount so retail options are limited.
Chuck
Hey All,
I finally got a Stanley 45, but it didn't come with any blades.
Anyone have a recommendation on where to find some blades other than eBay?
Also need a set of long rods too.
Thanks,
-Kevin
Hi Y'all, I am looking for a small supply of soft brass and copper to make jewelry and keychains from on the scrollsaw. Does anyone know of a good supplier of these metals? Thanks. Steve
This morning (between 10:30 - 11:30) I uploaded several photo's, I thought to my QSO gallery. However, I can't seem to find them.
These were photo's of the shop progress, as well as several North Carolina Woodworker members that had stopped by over the past several weeks?
Any ideas...