fence

  1. Rikon Band Saw Fence

    Rikon Band Saw Fence

    Back side of fence w/ support brackets.
  2. Rikon Band Saw Fence

    Rikon Band Saw Fence

    Back side of fence w/ support brackets.
  3. Rikon Band Saw Fence

    Rikon Band Saw Fence

    T-track piece bolted to table to attach fence.
  4. Rikon Band Saw Fence

    Rikon Band Saw Fence

  5. Rikon Band Saw Fence

    Rikon Band Saw Fence

    Outfeed end held to table w/ quick clamp once width of cut is set.
  6. Rikon Band Saw Fence

    Rikon Band Saw Fence

  7. Bird on Fence

    Bird on Fence

    Bird on Fence
  8. W

    Installing Wixey fence digital readout to unisaw

    I recently purchqased the Wixey fence digital readout attachment for my delta unisaw with 52 inch unifence. all went well until the part where the universal mounting bracket is to be attached. There is no place on the unifence medchanism where I can attacdh the -plate withpout interfering with...
  9. W

    Wixey Fence Digital Readout

    Is this readout worth the 100$ it costs or is it a gadget? It sounds good, but I have been burned before and would like some feedback from users. Any input appreciated. Thanx.
  10. allisnut

    Delta Contractor Saw Fence Ideas

    I have an older Delta Contractors Table Saw with the 'old style' fence with round rails on the front and back of the saw. What can be done to improve the fence, without buying a better system? I'm going to try to clean and lubricate the fence tonight, but it has been hard to slide back and...
  11. Mike Camp

    Aligning Table Saw Fence

    So I've been doing a ton of reading on aligning my new Delta T2 fence (Biesemeyer clone) and I've read in a handful of places that you want the rear of the fence to be about .020" farther away from the blade than the front of the fence. I assume this is to prevent kickback from occurring via the...
  12. blazeman45

    New Router Table Fence (Updated Pics)

    Started the fence for my new router table I recently built. It has a sliding fence that will have replaceable inserts. I took photos as I progressed.... Would have finished but I ran out of glue for the laminate!!:BangHead: View image in gallery View image in gallery View image in...
  13. Resaw Fence

    Resaw Fence

  14. Gotcha6

    Bandsaw resaw fence

    Seeing Bruce's thread about making the jig to flatten his blade screw reminded me of what I've been doing this week. And yes, Scott is right. A jig needn't be expensive to work. I had to do some re-saw of 8" & 12" ash on short pieces. To further complicate things, the re-saw had to be tapered...
  15. DanR

    caps for fence posts

    Hi Folks, I have been working on fencing in my yard and now need to finish off the posts. The posts are 4x4 pressure treated, everything else is Cypress (gorgeous wood from Ivey at Beaver Branch Sawmill). I am wondering if anyone has made caps themselves and what experiences you can share...
  16. Tim Sherwood

    Router table fence -advice wanted

    I want to build a new router table fence. I would welcome any ideas from those of you that have made your own. I hope to incorporate several features: hold down feather boards a safe but flexible bit guard replaceable zero clearance inserts good dust collection I'm currently using a "bargain"...
  17. Rip fence fix

    Rip fence fix

    Rip fence fix
  18. Rip fence fix

    Rip fence fix

    Rip fence fix
  19. Rip fence fix

    Rip fence fix

    Rip fence fix
  20. Rip fence fix

    Rip fence fix

    Rip fence fix

Our Sponsors

LATEST FOR SALE LISTINGS

Top