fence

  1. Badabing

    Wixey Digital Fence AND Angle Gauge at WC

    If anyone has been considering either one of these digital gauges from Wixey, now is the time to buy! WoodCraft has a special where you get both for $99, and I believe they still have the free shipping deal going on. The digital fence gauge would be a nice addition to any table saw and the...
  2. JMcanoe

    Kreg Fence $75 on Raleigh CL

    These list for $137 at Woodworkers Supply, plus $17 for the micro adjust. http://raleigh.craigslist.org/tls/491523736.html
  3. woodworker2000

    Raleigh CL - HTC Table Saw Fence and 7' Rails - $150

    Found on Raleigh Craigslist: HTC T StyleFence with Micro Adjust. 7' extension rails for cabinet style saw. Must be able to pick up. Link: http://raleigh.craigslist.org/tls/489279938.html
  4. K

    Fence alignment gage

    I was looking at pictures posted by forum members and ran across a fence alignment gage. It was mounted on a router table in the miter slot. My question is why would you need to align the fence on a router table to the miter slot. I ask this question with all respect. My router table fence is a...
  5. pslamp32

    Building a fence...

    Hi all! Quick question for all of you much more wise than me. I'm in stalling a rustic split rail fence with some chicken wire attached to keep the puppy in. My question is : can I just fasten the chicken wire to the posts with normal staples or do I need to use some special galvanized ones? I...
  6. redhawknc1

    Delta 36-979 1-1/2 HP Contractor Saw - No Fence - Free Mobile Base - $272.91 SHIPPED

    Delta 36-979 10-Inch Left-Tilt 1-1/2 Horsepower Contractor Saw with No Fence $272.91 FREE SHIPPING http://www.amazon.com/exec/obidos/tg...X0DER&v=glance Promos... Receive one HTC HTC2000 Universal Mobile Base free when you purchase 1 or more qualifying stationary power tools offered by...
  7. Bottom view 2, Craftsman router fence

    Bottom view 2, Craftsman router fence

    Fence mounts to T-track with two shop-made brackets. Brackets mount to upper fence with two knobs and 1/4 hex bolts. Single hex-bolt through bottom of each bracket mounts fence to T-track.
  8. Front view 2, Craftsman router fence

    Front view 2, Craftsman router fence

  9. Side view, Craftsman router fence

    Side view, Craftsman router fence

    Fence mounts to T-track with two shop-made brackets. Brackets mount to upper fence with two knobs and 1/4 hex bolts.
  10. Top view, Craftsman router fence

    Top view, Craftsman router fence

    Fence mounts to T-track with two shop-made brackets. Brackets mount to upper fence with two knobs and 1/4 hex bolts.
  11. Rear view, Craftsman router fence (closeup)

    Rear view, Craftsman router fence (closeup)

    Fence mounts to T-track with two shop-made brackets. Brackets mount to upper fence with two knobs and 1/4 hex bolts.
  12. Rear view, Craftsman router fence

    Rear view, Craftsman router fence

  13. Rear view, Craftsman router fence

    Rear view, Craftsman router fence

  14. Front view, Craftsman router fence

    Front view, Craftsman router fence

  15. Front view, Craftsman router fence

    Front view, Craftsman router fence

  16. Cam clamps engaged against stock

    Cam clamps engaged against stock

    This shows a picture of the cams engaged against a piece of stock, holding it securely against the drill press table.
  17. JackLeg

    [Problem-Main Site] Table Saw Router Fence View

    Status: Entered Assigned To:: Unassigned ===================================== In the recent post by Ken Massingale, I am unable to view the pics. Got the "dreaded RED X" I right clicked to Show Picture, but still unable to view. ????
  18. Touchwood

    Beisemeyer sacrificial fence

    Hi Guys, Having just installed my new $80 Lowes Bies..the first thing I needed to do was cut some 1/2" tenons for a floating panel frame with a dado set. That means the right side blade has to be "touching" the fence ( actually you want it a hair inside the fence face)...so I stuck on a...
  19. nelsone

    Fence Project

    I have finally finished digging post holes and have started putting up the boards. Here's a pic of what I've done so far. Cell phone pic...sorry:oops:
  20. J

    Biesemyer Fence

    Just left Lowes in Hendersonville with a new Biesemyer fence. $80.00. Tryed to get one there two weeks ago but they couldn't find the one there computers said they had. Drove to Bevard. They couldn't find the one their computer said the had. Guess what? They still have one more for $80.00...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top