attaching

  1. A

    Attaching a photo

    How do I attach a photo from my computer to post in a forum?
  2. flywelder

    Attaching legs to a slab to make a bench

    I want to build my first ever slab bench, and i am held back because I am not sure how to attach the legs to the slab. I have seen benches with tree branches as legs and these were I am guessing, turned round on one end and then fitted into a hole in the slab. that would work but how...
  3. bluchz

    Attaching cabinet face frames?

    I am making kitchen cabinets and am worried about how i decided to attach the face frames. I assembled the face frames using pocket screws. The face frames had rabbits in them to align with the cabinet boxes. and I then attached the face frames to the boxes with glue and brads. Now that i am...
  4. K

    Attaching Solar Panels

    Looking to install a solar system, I am in inquiring to see if there is anyone who has done this before. There appears to be some standard frames used for attaching solar panels to the roof. Has anyone used another method using materials purchased at the lumber yard?
  5. R

    Attaching Wood to Glass

    My neighbor has asked for help constructing a display case for his son who collects major league baseballs. His idea is a home plate-shaped case, pointy end down, with shelves for the balls. The thought is to enclose the front with a piece of glass that slides down from the top in a groove cut...
  6. NCTurner

    Attaching 2x4 to cinder block colum

    Hey ya'll I am wanting to put up some shelves in my shop for drying blanks. I have some colums made of cinder block that has been painted. I am planing to attach some 2x4's for shelf supports and was thinking Liquid Nails would be the ticket. Any thoughts???
  7. CrealBilly

    Attaching trim cross grain?

    I'm working on a bookcase and want to wrap the bottom with a 1x4 across the front and sides. I tongued the front edge of the bottom shelf and grooved the back side of the 1x4's so it fits flush with the front edge of lower shelf some glue and clamps will care of the front. But for the sides...
  8. S

    TIP: attaching paper templates (band saw, scroll saw, etc.)

    .
  9. K

    attaching a handle to a wooden mug

    Hello all, I've recently made a 6" tall mug which I would like to attach with a handle. I haven't fashioned the handle yet, because I have no idea how to attach it! I realize that a proper glue joint can be 'stronger than the wood itself', but simply gluing the handle to the mug surface...
  10. Bryan S

    Attaching Top and a little design help

    Got the top glued up and sanded back flat (well relitavly flat) but it needs a little something. Heres the top Heres the top setting on the entertainment center It seams like the top needs a profile routed into the edges but what would work. I routed a 1/4 in roundover beaded...
  11. Ralrick

    ? on attaching a cleet

    I built a fairly small shelving unit (about 20" X 40") that my wife wanted for her paper punches she uses in scrapbooking. She would like me to hang the unit on the wall but I didn't plan for hanging the unit when I built it. I would like to use a cleet to hang in on the wall, but I made the...
  12. Ralrick

    Dumb Question: Attaching guide to Bosch Router

    I have an older Bosch B1350 router that I would like to use with the PC 4212 Dovetail jig. The DT comes with a template guide that attaches to the router but I don't have a clue on how to attach it:eusa_thin Do I need a different template guide specifically from Bosch? It does not appear...
  13. thrt15nc

    Attaching hook & loop pad back on sander

    I'm dying here. Not quite, but this little bug is beginning to wear on me. :BangHead: :BangHead: :BangHead: :BangHead: The peel and stick part of the hook and loop pad that goes on the little Ryobi palm sander didn't "stick" long. I've been using double sided tape to attach it back on but that...
  14. Vanilla Gorilla

    Attaching a table top

    Other than figure 8 fasteners, what is another good way to attach a table top to the frame? What about dowels, or is there too much of a problem with wood movement of the table top? If nothing else, I'll do figure 8's, but I was kind of wanting to stay away from metal fasteners at all, and do...
  15. M

    Attaching Corian material to wood

    Anyone between the Blue Ridge Parkway and East Carolina University can answer this question. I just completed a cabinet that will have a solid surface insert inset into a mitered frame. Does anyone have any idea what is the best adhesive for securing this material to the wood frame? This is my...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top