crosscut

  1. BKHam

    Forrest Woodworker II TS blade

    i want to upgrade my crosscutting capabilities, let's say money is not a big concern in this. I've done budget buys until this point and now i'm ready for the best. first idea....it seems a lot of folks get the 40 tooth general purpose forrest blade and get great crosscutting results. I use a...
  2. W

    First of 2 questions about crosscutting

    Early in my woodworking "career" I built a crosscut sled that has been used extensively. Recently, I purchased a used Incra Miter 5000 which has been used little. I am thinking of replacing my crosscut sled with a newer more accurate one. My question is whether the Miter 5000 replaces a shop...
  3. CarvedTones

    Craftsman 10" Compound Sliding Miter Saw w/ Freud Crosscut Blade - $75 (Cary)

    NOT MINE (if I had a spare $75, I would be considering it though)... http://raleigh.craigslist.org/tls/2365609986.html Craftsman 10" Compound Sliding Miter Saw w/ Freud Crosscut Blade - $75 (Cary) Date: 2011-05-06, 10:05AM EDT Reply to: sale-jb9th-2365609986@craigslist.org [Errors when...
  4. kooshball

    Which flush cut router bit to "cross-cut" walnut?

    I will be cutting the top for my dresser to size soon and but it is too large to safely cross-cut on my table saw. My circular saw is terrible and doesn't have enough support to make a square cut so my plan is to cut close to the final size on the band saw or with a jig saw and then clamp a...
  5. kooshball

    good cross-cut blade for circular saw?

    I have a standard, no bells or whistles circular saw (7 1/4") that I need to use to cross-cut what will become the top of my 61" wide dresser. Any recommendations for a good cross-cut blade that won't give any tear out (the top is 3/4" walnut)? Thanks
  6. M

    Freud TK807 Avanti 12-Inch 96-Tooth ATB 1-Inch Arbor Ultra-Fine Finish Crosscut Blade

    Freud TK807 Avanti 12-Inch 96-Tooth ATB 1-Inch Arbor Ultra-Fine Finish Crosscut Blade $27.68 Shipped. http://www.amazon.com/Freud-TK807-96-Tooth-Ultra-Fine-Crosscut/dp/B000XQDO1S/ref=sr_1_1?ie=UTF8&s=hi&qid=1281524908&sr=1-1 Price dropped for today. Usualy good for a day before it goes back...
    • Marlin
    • Thread
    • 12inch 1inch 96tooth arbor atb avanti blade crosscut finish freud tk807 ultrafine
    • Replies: 6
    • Forum: Found for Sale/Hot Deals
  7. TN Woodie

    Delta 60 T Crosscut Blade

    Delta 35-7646 10 Inch 60T Crosscut Circular Saw Blade On Tooliday: With shipping, $32.99 http://closeout.tooliday.com/
  8. 100_2131

    100_2131

    • Canuck
    • Media item
    • crosscut sled universal
    • Comments: 0
    • Album: Shop Stuff
  9. 100_2130

    100_2130

    • Canuck
    • Media item
    • crosscut sled universal
    • Comments: 0
    • Album: Shop Stuff
  10. S

    cross-cut or rip ?

    Hi everybody, I'm working on a hall table project and want to give a slight angle to the table's legs (like 3-4 degrees), I'm thinking I should use my ripping blade for best results, but I'd like to hear from everybody else who might have done this in the past... My current pieces for the legs...
  11. S

    Milwaukee Complete Panel Saw System w/ 50" Crosscut - $1100 (RDU/Brier Creek)

    Not mine! I wish I had the room, tho! http://raleigh.craigslist.org/tls/1585123217.html Milwaukee Complete Panel Saw System w/ 50" Crosscut - $1100 (RDU/Brier Creek) Date: 2010-02-03, 11:08PM EST Reply to: sale-2se5e-1585123217@craigslist.org [Errors when replying to ads?] Brand New...
  12. Mt. Gomer

    Free Crosscut Sled Plan

    This month's Woodworker's Journal ezine had a free plan for a nice crosscut sled. It's simple and easy to modify if you want to. It also has some good tips for squaring it up. It's a nice alternative to the "supersled" versions if you don't need all the features.... Anyway, since it was free...
  13. eyekode

    RAJG - crosscut sled

    This is my first jig for the Raleigh Area Jig Game. I built the "Super Sled" from EagleLakeWoodworking: http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx Top view: View image in gallery Bottom view: View image in gallery The first runner is dado'd in (very...
  14. merrill77

    My crosscut sled

    I saw a post this week about crosscut sleds - which reminded me I hadn't posted pictures of the sled I finished last weekend. I've got details of the crosscut sled on my site. For the impatient, here's a teaser:
  15. F

    CrossCut Sled Advice

    Hi everyone. I decided it was time for my first real thread (Aside from the my Intro Thread). I am making my first Jig this weekend. I am going to make a cross-cut sled for my table saw. I have some slider rails coming in and have a piece of laminated MDF for the actual sled. I still do not...
  16. Tar Heel

    Left Hander's Crosscut Sled

    I needed a simple, but effective, crosscut sled. This plan appeared in the October 2003 issue of Wood magazine. On the plan, the longest part of the sled was to the left of the blade. Being a southpaw, I stand to the right of the blade. It's just much more comfortable that way. Therefore, I...
  17. T

    Crosscut Sled

    I finally finished my new crosscut sled to replace my old one that didn't fit my new saw i got this summer. There were two features i really wanted after my experience with the first - hold downs for the piece being cut since it was awkward trying to hold down the piece on both sides while...
  18. erasmussen

    crosscut sled

    I wanted to try to make a crosscut sled for my BT3100. As you know the BT3100 comes with no miter guide slots, there is an add on that mounts on one side (I don’t have that) and its only on one side. I will not be using any store bought sleds or jigs, so I figured I could use some nice...
  19. Mark Fogleman

    Tune Up Your Crosscut Sled

    Tune Up Your Crosscut Sled Quick video with a couple of good ideas. Everybody needs a "Stupid Block" on their sled. Mark "Keep the blood on the inside"
  20. chris99z71

    Another crosscut sled

    In my rare bout of productivity, I finally built a crosscut sled. Front and rear are 5/4 ipe, as is the runner underneath, and the base is 1/2" baltic birch. I put a coat of Cabot's Australian Timber stuff oil (natural) on it tonight. It's a mixture of linseed, tung, MS and some other stuff -...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top