band

  1. Rikon Band Saw Fence

    Rikon Band Saw Fence

    Outfeed end held to table w/ quick clamp once width of cut is set.
    • Bill Clemmons
    • Media item
    • band fence rikon saw
    • Comments: 0
    • Album: Shop made BS fence
  2. Rikon Band Saw Fence

    Rikon Band Saw Fence

    • Bill Clemmons
    • Media item
    • band fence rikon saw
    • Comments: 0
    • Album: Shop made BS fence
  3. H

    Band saw working again

    Just got my old band saw put back together and wanted to thank everyone for their input a while back . I was in such a good mood I turned out a piece of Persimmon that I had been wanting to get on . Thanks guys . Hawk
  4. DanR

    14" Rigid band saw at Direct Tools (Mebane) for $260 today

    Direct Tools has a $75 off on $220 that ends today. The Rigid 14" is on sale for $320, minus $75 = $265 with tax. If you have the Groupon, it ends up costing only $220 (including the $30 cost of the Groupon). I know it is an import, but from what I have read it is good after: - adding a...
  5. H

    Band saw part

    Hello , I have an older model Grizzly G1538 16" band saw that I need an " upper wheel shaft hinge " as mine is broken . The factory has discontinued this model . If anyone has one for sale please contact me . Thank you , Hawk
  6. jobelenus

    Jet 14" Band Saw

    I am having an issue with the table on my saw - I can't seem to get it to stay in the 100% flat and level position. No matter how hard I try to tighten those lousy hand nuts it always eventually works loose - Just curious if anyone else has had this issue and has found an answer Thanks John .
  7. AmishWarlord

    3 Wheel Band Saws

    I saw a Delta band saw for sell on Craig's List. However looking for reviews on it I saw "3 Wheelers are bad!" over and over. Is this true or just a myth? http://charlotte.craigslist.org/tls/2616474476.html
  8. A

    Planer and Band Saw

    As some of you may know I have completed a few projects and I think I am ready to move onto a glider chair that I saw in wood magazine. I am posting this because I am considering a few new tools and I have a few questions. I think I am in the market for a jointer and a band saw. I am been...
  9. J

    Powermatic 14" Band Saw - $100 NOT MINE

    eastern NC craigslist > for sale / wanted > tools please flag with care: [?] miscategorized prohibited spam/overpost best of craigslist Avoid scams and fraud by dealing locally! Beware any deal involving Western Union, Moneygram, wire transfer, cashier check, money order, shipping, escrow, or...
  10. ebarr

    would it hurt my band saw if....

    LOML and soon to be bride needs to cut some candles that are 2" in diameter. Needs to cut 1 1/2 off the bottom of about 10. I am trying to think of a way that I can cut these square. band saw came to mind...hack saw was another idea, mounting them in my lathe and using my parting tool was...
  11. J

    Delta enclosed stand 14" Band Saw with riser$300

    Currently on RDU craigslist is a Delta enclosed stand !4" band saw with riser block and mobile base. Add says "Band saw $300 Raleigh."
  12. MrAudio815

    Which Band sawto Buy? Delta or Rikon?

    Hello NCWW's, I have been interested in a smaller Bandsaw for curved cuts, so which one would you choose? Rikon 10-305 for $270 with free shipping and no driving or wasting my time. Or a used Delta 28-276 model ....for $150 and an hour drive one way. The guy has had it for two...
  13. dino drosas

    Three Wheel Band Saw - A Shamfull Gloat

    I have a 24" Laguna band saw and keep a wide carbide tipped installed. Anytime any curved cuts are needed a blade change is required along with readjusting the guides. I decided that a small band saw would be a good addition to the shop. The odds of my winning the one at the picnic were...
  14. jack briggs

    band saw blades rewelded

    Anyone know of a shop that makes or repairs bandsaw blades (other than Raleigh Saw)?? Raleigh Saw did the worst job on them the last time I had them in, so they're out. Any others out there?? Thanks in advance. Cheers,
  15. S

    Reliant 14 inch Band Saw - $175 (Trinity, NC)

    not mine http://winstonsalem.craigslist.org/tls/2300149473.html Reliant 14 inch Band Saw - $175 (Trinity, NC) Date: 2011-04-01, 7:41PM EDT Reply to: see below 14 inch Reliant band saw, model DD90, 1 hp with blades and accessories. Price is $175.00, contact Eddie @ (336)431-0550 for...
  16. S

    Delta 14" Band Saw - $250 (Rocky Mount)

    not mine http://raleigh.craigslist.org/tls/2296314522.html Delta 14" Band Saw - $250 (Rocky Mount) Date: 2011-03-30, 8:55PM EDT Reply to: sale-esabc-2296314522@craigslist.org [Errors when replying to ads?] Band saw is is good condition. Call 434.960.4107. Location: Rocky Mount it's...
  17. sbarnhardt

    Miter Gauge for Old 10 inch Craftsmen Band Saw???

    I recently bought an old Craftsmen 10 inch bench top bandsaw. I realize it's not much of a bandsaw, but I needed/wanted something to cut plywood pieces closer to size for my scrollsawing. This one fit the bill and the price was right. Bought it and a Craftsmen 4x36 belt/disc sander for $25 each...
  18. S

    DELTA industrial 20 inch Band Saw - $2500 (Raleigh)

    Not Mine: Not sure how good a deal, but had to post, since I love the lines on this beast. Classic and looks to be in great shape. http://raleigh.craigslist.org/tls/2254158363.html DELTA industrial 20 inch Band Saw - $2500 (Raleigh) Date: 2011-03-08, 1:14PM EST Reply to...
  19. llucas

    Band Saw Oops..no bad blood, just bad blade..

    So, as a full disclosure, I am generally "safe" around power tools but was using my Rikon 10-345 18" BS yesterday to round up a bowl blank in a "not quite safe" way....the surface of the blank against the table had been partially flattened for stability...but obviously not enough stability...
  20. S

    Delta Shopmaster 10" Band Saw with Leg Stand - $175 (Raleigh, NC)

    Not Mine http://raleigh.craigslist.org/tls/2205825097.html Delta Shopmaster 10" Band Saw with Leg Stand - $175 (Raleigh, NC) Date: 2011-02-09, 3:42PM EST Reply to: sale-rnfca-2205825097@craigslist.org [Errors when replying to ads?] I have a Delta Shopmaster 10" Band Saw with Leg Stand for...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top