Well essentially done with this shop table except for bottom shelf, and possibly a small vise at one end.
Top is ash and finished with Danish oil, and base is 2x6's that once re milled revealed some grain of their own. Put BLO on the base.
Top measured out at 1 1/8 x 35 x 71 1/2, so enough room for assembly and still leave room for some tools at hand on the table top.
Even cleaned all the sawdust off the floor to start next projects, small table for porch and a miter saw station.
Making that large of a top was a big learning experience for me in milling, jointing, and producing tight fits.
Top is ash and finished with Danish oil, and base is 2x6's that once re milled revealed some grain of their own. Put BLO on the base.
Top measured out at 1 1/8 x 35 x 71 1/2, so enough room for assembly and still leave room for some tools at hand on the table top.
Even cleaned all the sawdust off the floor to start next projects, small table for porch and a miter saw station.
Making that large of a top was a big learning experience for me in milling, jointing, and producing tight fits.