completed

  1. IMG_5595

    IMG_5595

    Crest rails fitted
    • cpowell
    • Media item
    • chair completed frame walnut
    • Comments: 0
    • Album: Walnut Dining Chair
  2. IMG_5594

    IMG_5594

    Crest rails fitted
    • cpowell
    • Media item
    • chair completed frame walnut
    • Comments: 0
    • Album: Walnut Dining Chair
  3. IMG_55931

    IMG_55931

    Crest rails fitted
    • cpowell
    • Media item
    • chair completed frame walnut
    • Comments: 0
    • Album: Walnut Dining Chair
  4. DWSmith

    Completed Rolling Maple Island

    Just have completed this project and it will go to the forwarding company for shipment tomorrow. The finish is Watco Danish oil, 2 coats sanded in between. A final wax coat will be added tomorrow morning to make it slick and smooth to the touch. The top is coated in mineral oil, allowed to...
  5. BrianGeib

    Completed Christmas present - Sofa Table

    Here is the sofa table that I made for my sister. It matches the end tables that I made for her this summer. All wood is QSWO from Scott. We were able to find everything I needed from the same tree. This was some very pretty wood. As usual, thank you Scott for your help and attention to detail...
  6. W

    Completed table/thanks for the help!

    Here is a table that I built for a friend. I had asked the forum for help getting a semi-gloss finish. I am pleased with the results. The table is made of Sapele. The legs are 3 inch square and the top is 1 1/4 inch thick. She needed a table that was sturdy. I think this will fill that bill. It...
  7. Nelson

    Completed Entertainment Ctr and THANKS to Bill Clemmons!

    Finally finished an entertainment ctr for my daughter. Many, Many thanks to Bill Clemmons who made the raised panel doors. :icon_thum (The best looking part of the unit!). Finally took the unit to Kingsland, GA last weekend for the installation and final trim work. Happy daughter, and happy...
  8. cyclopentadiene

    Completed Dressing Table with cabriole legs

    Recently completed project, mahogany dressing table with cabriole legs and tiger paw feet. The table was made according to plans from http://www.toolsforworkingwood.com/indextool.mvc?prodid=LL-M-8 similar to a table the Museum of Early Decorative Arts (MESDA) in Winston-Salem, North Carolina. I...
  9. LeftyTom

    Kitchen Cart Completed

    Thanks to Rick DiNardo for hooking me up with the white oak for the shelves and top, and the ash for the frame. Thanks also to Rick for giving me a big hand in getting the top flat. 35.5" H x 30.5" W x 26 3/4" D. Finish is 3 coats of Waterlox Original Sealer and Finish. Joinery is wood...
  10. M

    Barbie House Storage Dresser - Completed

    I was going to update my WIP post, but found that it was closed. No prob'. I just opened a new one. Just a reminder, this was a small set of drawers to go under my daughters' 3-story Barbie house. I designed in: Two drawers for all the Barbies and accessories A pull out shelf stained...
  11. blbradford

    Quilted Maple End Table completed

    I purchased a piece of Quilted maple from Raleigh Woodcraft for about $65- it was 12"x20"x2.25". I made one jewelry box and also just finished this end table. I think the book match came out great[/url][/IMG] I was trying to use my band saw to resaw thin slices <thinking this would provide...
  12. drw

    Flip Work Table: Project Completed

    I have been wanting to build a solid worktable for my shop, but couldn't find a plan that was suitable for my small work area. The recent issue of Wood magazine has a plan for a work table that actually flips down so you and push it aside, if needed. The table is extremely sturdy, in fact the...
  13. TracyP

    Server Upgrade COMPLETED!

    Just got word that our server upgrade will happen either tonight between 2:00 AM and 5:00 AM Central time or the same time tomorrow night. Server is built, tested, and ready to move our files to. Cross your fingers for a smooth migration :eusa_pray:eusa_pray.
  14. drw

    Cordless Tool Station: Project Completed

    In my continuing effort to organize my little shop, I wanted to find a more satisfactory home for the cordless drills/drivers other than on top of the work bench. The project is an adaptation of a plan from Plans Now and is made from some odds and ends pieces of 3/4 cherry veneer that I had left...
  15. cyclopentadiene

    Maloof Low Back Side Chair Completed

    I completed my Maloof Low back side chair using walnut and ebony accents as described in the thread Coopered seats in How To forum). Attached are a few photos of the finished product.Overall I am very satisfied with the outcome and look of the finished chair. lesson learned, invest in better...
  16. drw

    Bookcase/Dollhouse: Project Completed

    I finally completed the Dollhouse Bookcase that my daughter requested for my oldest granddaughter. While the project was not difficult, it did have its share of headaches. The plans my daughter asked me to follow were not great (butt joints and nails); consequently, I made several changes to...
  17. rcflyer23

    Wooden Block Plane -- COMPLETED!!!!

    So in I believe the most recent edition of Wood Magazine they had an article on making a wooden hand plane. I've wanted to do one for a while and the article made me go ahead and give it a try. it's turning out okay. We'll see how it works once I get it totally done. I need to find a...
  18. drw

    Wall Cabinet: Project Completed

    I am pleased to report that I completed my Wall-Hung Tool Cabinet, pictures are posted below. Since I have only been involved in woodworking for a few years, I try to select projects that will add to the utility and/or storage capacity of my small shop as well allow me to work on new techniques...
  19. Truefire

    Completed ambrosia maple sofa table

    I completed my Ambrosia Maple sofa table that will serve as a finishing table for the final completion of my game calls. Thanks guys for helping me locate some quality Ambrosia Maple. I finished the table with the wipe on Waterlox finish and i am really pleased with it's ease of usage and...
  20. Bill Clemmons

    Senior project completed

    Awhile back my grandson's best friend asked me if I would be his mentor for his HS Senior Project, and of course I said yes. He wanted to build a dresser for his bedroom. We started the project about two months ago, and finished it this week. He works weekends and one afternoon a week, so our...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top