pics

  1. Shamrock

    New Table Concept - "The Ballerina" Complete with pics

    Hey Everybody, Many of you have seen this in progress over the past couple of months so here's the final result. This is the 1st table of this new concept which is a variation of other 3 leg tables that I've made. The concept was to canter the legs in a bit to make it look as if it was...
  2. merrill77

    Coffee Table redux - WIP pics

    I built a prototype for this table last fall - it turned out well enough to avoid the firewood pile but it took forever to finish it. I'm now making progress on this one, which is cherry and padauk. The joinery on this table is somewhat unusual and has been fun, but challenging. This is my third...
  3. T

    Nice day in the shop today :) (PICS ADDED 1/8/12)

    It has been a long time since I had any fun in my shop. 1st, Put the finishing touches on a small activity table for the girls I started last spring. 2nd, Cleaned up a mess of sawdust (yes it was fun) See this post. 3rd, The real problem with my dust collection system is the only switch I...
    • toolferone
    • Thread
    • added day nice pics shop today
    • Replies: 5
    • Forum: General Woodworking
  4. Mike Davis

    Finished a bowl and made two spoons (PICS)

    Maybe I'll have time to take some pics tomorrow. :rotflm:
  5. blazeman45

    New Kitchen Cabinets Started (New Pics 01/09)

    The wife asked for new cabinets and counter tops for X-mas!! My first thought was new tools to help me along and she agreed!! :banana:I bought the new Dewalt 718 and finished getting my shop set up like I wanted it!! The cabinets are birch plywood with Cherry face frames. She wanted the look...
  6. Douglas Robinson

    MAME Machine! WITH LOTS of added pics!!!!

    After only sporadic work in my shop I am back in a big way. Last week I finished a slew of pens and sent them out. Here is a picture: Since then I have been working on a MAME machine. It is a big arcade machine that emulates almost any old arcade game. I have the main carcass 90% finished...
  7. blazeman45

    New Router Table Fence (Updated Pics)

    Started the fence for my new router table I recently built. It has a sliding fence that will have replaceable inserts. I took photos as I progressed.... Would have finished but I ran out of glue for the laminate!!:BangHead: View image in gallery View image in gallery View image in...
  8. blazeman45

    Mitre Saw Station Build (Updated Pics - 11/18)

    After much thought, I went to the shop this morning and got started building my new mitre saw station... I purchased a new Dewalt 12" SCMS a couple of months ago to replace my old 12" Dewalt. I got the carcasses and tops built today and got the table for the saw installed. - The saw table is...
  9. blazeman45

    New Router Table Started (Updated PICS)

    My old router table served me well for the last 10-12 years but I wanted a new one that allowed mobility. I decided this week to get it started... I built it from Birch plywood and Poplar (I'm frugal... Wife says cheap:gar-La;) View image in gallery I wanted bit trays I could take out...
  10. Tom Dunn

    A few pics from friends old house...

    Friend of mine lives in a small house, built, supposedly, in the 1920's. Small or not, the cabinetmaker who built it as his home did some amazing, to me at least, things. My friend is disabled and will not be in the house much longer, it will then be sold. I took a bunch of pics while...
  11. J

    Deleting pics from the Gallery

    How do I delete selected pics from my Gallery. I just want to clean it up a bit and I have 14 screens of stuff. A lot of it is no longer needed so I'm cleaning house. Thanks Jeff
    • Jeff
    • Thread
    • deleting gallery pics
    • Replies: 1
    • Forum: Help Desk
  12. CatButler

    Treadle lathe update: Making wood dizzy (now with pics)

    Where I last left off, http://www.ncwoodworker.net/forums/showthread.php?t=39312, I had made a treadle and attached it to the crank wheel I was using to drive the shaft. Now, I have mounted the spindle and turned a wooden pulley, rounding it out in place on the spindle. I also knocked out a...
    • CatButler
    • Thread
    • dizzy lathe making pics treadle update wood
    • Replies: 1
    • Forum: Woodturning
  13. G

    Floating Top Table Pics

    So, I finally got some decent pictures of a table I finished last year.:icon_thum It's a floating top table modeled after an article in Fine Woodworking #135. I made two of them and gave one to my brother and his wife for a wedding present. That one was Maple with a Sapele top and this one is...
  14. JohnW

    New Shop Progress Pics

    View image in gallery 20' x 28' Block wall on concrete foundation. View image in gallery Building up and wraped. Waiting for rough-in elec inspection early next week. When passed, will install doors, windows, siding to match the house, gutters and finish the interior. Then final inspection.
  15. Gotcha6

    Downloading pics

    I have an old Dell laptop from work that hasn't been used in years (since the 'berry took over and before). I plan to use it as a platform to display a slide show of our gallery photos at the Wood Worker Show in CLT. I tried to click & drag photos from the gallery to the flash drive I'll use...
  16. leftoflefty

    Cypress coffee table WIP pics

    So I've been working on a coffee table for my sister over the past week. After sweeping all of this up is when I decided I would be purchasing a DC system in the near future. The beer boxes are from watching the NFL playoffs in the shop because the women invaded the den.:wsmile: View...
  17. K

    Our Logosol M5 (pics :)

    I am finally posting a pic of our logosol set up and some of the wood we have milled up with it. We have the logosol M5 and us a Sthil 660 power-head. I will try to snap some better pics of some of the boards and post those as well. We just partially finished some boards about a month...
  18. B

    Build a Bear Armoire with pics

  19. Y

    shop pics

    I sure enjoy looking at all the shop pictures. I'd like to see more!!!!!! Please post more shop pics. I'll try to get mine cleaned up and post some pics soon
  20. NCTurner

    Seeking Pics of Carbatec Threading Jig

    Back in the summer I scored a bunch of woodworking tools from a yard sale. Among them some spindles from a Carbatec threading jig, but alas no jig. Does anyone have one of these? Any chance of some pics, I am hoping to fab the missing pieces. I found 1/2 pics on google, but not enough to get...
    • NCTurner
    • Thread
    • carbatec jig pics seeking threading
    • Replies: 1
    • Forum: Woodturning

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top