wip

  1. Mark Stewart

    WIP persimmion wood

    This is something I have been wrking on in the last little bit or so. It was a nice piece of Persimmion(was till I got a hold of it). I enjoyed this turning but the green wood selled like old feet according to my daughter. Thanks for looking. Mark
  2. Changing table WIP

    Changing table WIP

    Gluing sides on changing table.
  3. Changing table WIP

    Changing table WIP

    changing table WIP
  4. Changing table WIP

    Changing table WIP

    Gluing back on changing table
  5. Changing table WIP

    Changing table WIP

    Back frame of changing table - work in progress.
  6. Changing table WIP

    Changing table WIP

    Face frame of changing table - work in progress.
  7. T

    Changing Table - WIP

    I'm currently working on a changing table, based on a plan from Amateur Woodworker with various modifications. It is a dresser design so it'll be useful beyond having a baby in diapers. A picture from the plans (not mine): I don't want to paint it like the original plans, so i decided to go...
  8. Changing table WIP - 28 July

    Changing table WIP - 28 July

    Changing table progress as of 28 July 2009
  9. Changing table WIP - Cut layout - 2

    Changing table WIP - Cut layout - 2

    Soft maple boards with layout for cuts, second set of boards.
  10. Changing table WIP

    Changing table WIP

    Changing table work in progress, panel glue-up
  11. Changing table WIP

    Changing table WIP

    Changing table work in progress, boards ripped to width
  12. Changing table WIP - Cut layout - 1

    Changing table WIP - Cut layout - 1

    Soft maple boards with layout for cuts, first set of boards.
  13. S

    WIP: lathe restoration

    .
  14. James Davis

    Box WIP...UPDATE

    My daughter is getting married in September and asked if I would build her a box for the guests to place cards in at the reception. I wanted to make it out of something special so I looked around the shop and found a piece of walnut that my daddy had always said he wanted to make something out...
  15. JOAT

    Plastic bag carrier - wip

    Any more it's a bit of a hassle for me to manage plastic bags from the store with one hand and a cane with the other. Definitely didn't want to make multiple trips, but those bags do tend to dig in. So, took inspiration from this. View image in gallery Definitely did not want to pay whatever...
  16. davejones

    MS Stand WIP

    I made some progress on building a MS stand. I am building it around the drawers I got from Mr Audio (Matthew). They are working out great (lots of storage)! :thumbs_up So far I have the left side complete and the mid-section is assembled and leveled to the left side. Still need to build a...
  17. DaveO

    Blanket Chest WIP

    Got started on my blanket chest Friday afternoon. Got all the stock milled and cut to rough size. Today I cut the joinery, dry fitted the frame, measure for and glued up the QSRO panels. Tomorrow, hopefully I will raise the panels, glue everything up, sand it down and be ready to finish...
  18. Blanket Chest WIP

    Blanket Chest WIP

  19. Blanket Chest WIP

    Blanket Chest WIP

  20. Blanket Chest WIP

    Blanket Chest WIP

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top