soft

  1. Duck Intarsia - w/ finish

    Duck Intarsia - w/ finish

    This Intarsia Duck was a joint venture (My sweet lady, and myself worked together on this one), and it was the first go at the intarsia craft for both of us. Here are pictures of it before and after finishing (It is still wet in the picture, it is actually a satin finish). We made this last year...
    • SgtSnafu
    • Media item
    • ambrosia black duck ebony heart intarsia mahogany maple oak red soft walnut yellow
    • Comments: 0
    • Album: Some of Our Intarsia
  2. Duck Intarsia - unfinished

    Duck Intarsia - unfinished

    This Intarsia Duck was a joint venture (My sweet lady, and myself worked together on this one), and it was the first go at the intarsia craft for both of us. Here are pictures of it before and after finishing (It is still wet in the picture, it is actually a satin finish). We made this last year...
    • SgtSnafu
    • Media item
    • ambrosia black duck ebony heart intarsia mahogany maple oak red soft walnut yellow
    • Comments: 0
    • Album: Some of Our Intarsia
  3. S

    looking for 12/4 soft white maple.

    I'm in the Charlotte (well Concord really) area and I'm looking for a fairly small quantity of 12/4 soft white maple for table legs. I really don't need a huge amount. If anybody has any place they would suggest I would be grateful. If I can't find it, I'll likely have to laminate some of the...
    • sberube
    • Thread
    • 12 or 4 maple soft white
    • Replies: 5
    • Forum: Wood
  4. mtnfyre

    slurry technique for a soft smooth finish

    http://www.woodsmithtips.com/2010/12/30/slurry-technique/ I got this from a friends facebook page. hope some one finds it useful. Bear
    • mtnfyre
    • Thread
    • finish slurry smooth soft technique
    • Replies: 1
    • Forum: Finishing
  5. M

    Looking for Soft Silicone Glue

    Anyone know where to get some soft silicone glue. I'm looking for the stuff that many commercial enterprises use as an easily removable glue - like the stuff that you see holding a new credit card to the bank's paperwork. The stuff that is rubbery and just peels off and leaves no residue...
  6. froglips

    Wanted: Poplar or Soft Maple scraps...

    If you are like me (my deepest sympathies), you save your scraps. I'm working on a little Mortise chopping evening for the Hillsborough Orange Woodworkers group. We are "pretending to make table legs". So, looking for stock on the order of 1 1/2 to 1 3/4 square, 8" to 10" length...
  7. AmishWarlord

    Shapeing soft wood on a router table.

    There is a guy in NY that wants to use a table router to cut out fuselage sides for RC airplanes. Can anyone here pass along some advice on cutting soft wood shapes with a router? Here is the tread if ya want to see what advice he's been given from the RCers...
  8. SteveColes

    Thread soft deleted

    I just soft deleted a thread. I also sent the poster the following PM> If you think I'm wrong, then just undelete it
  9. timf67

    Bowl Tenons in Soft wood?

    Hey turners, I have a question and I apologize in advance for not having pics! Anyway, a friend of mine gave me an offcut of some 16/4 kd red cedar that he used to make a really nice table top. So I decided to cut it into a couple of small bowl blanks for practice. Things started well, the...
  10. steviegwood

    Where to Find Soft Brass/Copper

    Hi Y'all, I am looking for a small supply of soft brass and copper to make jewelry and keychains from on the scrollsaw. Does anyone know of a good supplier of these metals? Thanks. Steve
  11. M

    Best way to darken soft maple well and then seal Stair Tread

    I am going to make some stair tread out of soft maple. I know its a closed wood and can have some issues if you try and stain it. I also read that dye works well but have never used it and also not sure if you can use a oil poly on top or would I need to use a water poly? What I am looking to...
    • Marlin
    • Thread
    • darken maple seal soft stair tread
    • Replies: 7
    • Forum: Finishing
  12. TracyP

    Thread Soft Deleted

    I soft deleted the thread started by BigDog72 titled Watching the Ticker. I felt it was going to go bad in a hurry and now I have caught a little flack from it, which was anticipated. If anyone feels that I jumped too soon feel free to un-delete the thread. I felt like it was way too political.
  13. J

    Jacobs Soft Grip PRO Keyless Chuck

    I have a B&D 3/8" Hole Shooter drill that I use with my Kregg Pocket Screw jig. After years of using a keyed chuck ( which slipped by the way), I changed it out for a "Soft Grip Pro Keyless chuck a couple months back. There has been no slipage in the new chuck. Easy open and close. Well worth...
    • junquecol
    • Thread
    • chuck grip jacobs keyless pro soft
    • Replies: 4
    • Forum: Reviews
  14. T

    Use of maple, soft, hard

    Morning all, I would appreciate the advice of those with the experience to help me out on this... I am building a kitchen island. The top will be subjected to pot holding, cutting, sliding things around and just good ole kitchen stuff. I plan to use the following for doing this: White oak...
    • tonyps
    • Thread
    • hard maple soft
    • Replies: 11
    • Forum: Wood
  15. R

    Soft Deleted joke

    I soft-deleted FredP's post regarding containing the joke about a new element being found. One of the responding posts note that some offense was taken and that it might violate site policy. If I went overboard here, let me know... I think I did a soft-delete. Ray
  16. J

    KD lumber run #2 - 4/4 QSWO & 8/4 Soft Maple

    Working on the next Kiln Dry Raleigh Lumber run. As the lumber starts rolling off the mill I'll update this post with pics. What you can expect is to receive is fresh rough cut, kiln dried and stabilized lumber to a target moisture content of 6 ~8%, that'll be ready to work as soon as you get...
    • jeff...
    • Thread
    • 4 or 4 8 or 4 lumber maple qswo run soft
    • Replies: 53
    • Forum: Wood
  17. J

    Maple Hard Or Soft???

    I Have An Order For Some Maple Kitchen Cabinets. Would Soft Maple Do? What Is The Advantages And Dis-advantages? Thanks Dwight
    • jeeves
    • Thread
    • hard maple soft
    • Replies: 9
    • Forum: Wood
  18. J

    Not Mine - 300 BF soft maple forsale

    Approx 300 BF of soft maple forsale, barn sticked and stacked, air dry 3 years. Owner is looking for $525.00 which is $1.75 a BF, rough sawn, 4/4 random width 4" - 10" and length from 4' - 10' long. Ted sawed this three years ago for a local guy and he never used it. Thanks
    • jeff...
    • Thread
    • 300 forsale maple mine soft
    • Replies: 0
    • Forum: Wood
  19. J

    Black Walnut / Soft Maple forsale.

    Hi everyone we would like to try another lumber run for next Sunday (Jan 28th) in the Harbor Freight parking lot around 11:00 AM. I don't want to carry any more that 1000BF on my trailer, so if we reach 1000 BF we'll have to close this. This time we would like to try Black Walnut and Soft Maple...
    • jeff...
    • Thread
    • black forsale maple soft walnut
    • Replies: 78
    • Forum: Wood
  20. Larry Rose

    Finishing Soft Maple

    I recently built a small table out of soft maple. Since this is my first try at using it, I'm not sure about the best finish to use. Any suggestions?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top