phenolic

  1. charlessenf

    TONS of this phenolic material you can buy real cheap

    I received this offer this afternoon and thought to pass it on to "my wood working buddies." The "phenolic material" is the stuff they may Zero Clearance Inserts from (well, maybe not the 1/4" stuff). "If you ever want to drive a truck here, I've got literally TONS of this phenolic...
  2. M

    Alternative to Phenolic for table saw inserts and router plate?

    I need to make some table saw inserts and will eventually get around to making a router table. I'm cheap and don't like to pay too much for things. $30 for a phenolic table saw insert is pricey for me so I started looking at phenolic sheets instead. Unfortunately they seem to size the sheets so...
  3. J

    Melamine coated vs. Phenolic coated Plywood

    Are these the same beast? Have you used one or the other and purchased it locally? Cost for 1/2" or 3/4" per 4' x 8' sheet? :dontknow: 1/4 sheet (2' x 4') of 1/2" thick phenolic is about $50. Ouch and yikes...
  4. kooshball

    phenolic plywood

    It has been a few months since anyone asked about phenolic plywood so I figured I would post this again to see if any new sources for this type of material have been found in the Raleigh area. Ideally I need a full sheet of 3/4" phenolic plywood to make a table saw extension table and an...
    • kooshball
    • Thread
    • phenolic plywood
    • Replies: 24
    • Forum: Wood
  5. pviser

    phenolic plywood

    I would give my right arm for the chance to buy two or three 8' X 4' sheets of baltic birch phenolic-coated plywood. If I order it from northern state suppliers(e.g. New York), the motor freight would be extremely expensive. Anything closer to home?
    • pviser
    • Thread
    • phenolic plywood
    • Replies: 5
    • Forum: Wood
  6. M

    Phenolic Ply

    Hello All, I am looking to purchase several sheets of 3/4" phenolic plywood. I know about the stuff Woodcraft sells, but I need full sheets and the stuff they sell is only offered in smaller pieces. I've corresponded with Roberts Plywood in NY, and they will ship me what I want, but the cost...
  7. timf67

    Phenolic Resin Top

    Hey everyone, I have a co-worker who gave me a large slab of 1" thick phenolic resin that came from an old chemistry lab bench. Due to its size, weight, flatness, and chemical resistance I would like to use it as a work surface or assembly table. Does anyone have any suggestions on how to...
  8. huckster

    Looking for Phenolic Material for Router Fence

    Anyone know where I can get phenolic (in the Raleigh area) material. Say 3/4" that I could use on a router fence? I'm guessing some where around 2 1/2" by 24" 2 Pcs. Anyone ever had to cut phenolic material? Thanks, ~Huck
  9. chris99z71

    Phenolic coated plywood

    I've seen several people use this for stuff like router table tops. Where would one acquire this stuff? I did find one place that has it - never heard of the company before but they seem pretty big (~150 stores all over the country). White Cap Construction Supply In NC, they're in Raleigh...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top