feet

  1. J

    Need someone to carve ball claw feet

    I need to find a fellow NC woodworker who can carve ball claw feet for a coffee table that I made for my living room. I'm willing to pay reasonable amount for your work. I can sand and finish the feet myself; but need someone to do carving. I am located in Raleigh area and willing to drive up to...
  2. kernnal

    approx 4000 linear feet Douglas Fir - $2 (Snow Hill NC)

    approx 4000 linear feet Douglas Fir - $2 (Snow Hill NC) Date: 2011-02-22, 12:55AM EST Reply to: sale-h3dxz-2227731458@craigslist.org [Errors when replying to ads?] Approximately 4000 linear feet of Douglas Fir. Boards were used for bleachers in gymnasium approximately 55-60 years old. 90...
  3. kooshball

    Broken leveling feet on G0490 jointer; repair options??

    I had some mud jacking concrete work done last week that required me to move my tools out of the garage and into my driveway. While moving the jointer across the concrete the "raise" level holding pressure to the wheel slipped and put the machine down unexpectedly. When it came down the force...
  4. GarageWoodworks

    Board Feet Spreadsheet

    Hey Gang, I made a board feet calculator/spreadsheet. I included the lumber prices for "The Hardwood Store" (where I go). You select your lumber and thickness from a dropdown list and input length width etc. The prices change automatically depending on how many bd feet you are buying. The...
  5. PChristy

    Delta Homecraft Wood Lathe 8 feet - $250 (raleigh)

    Not Mine I have for sale an 8 foot wooden lathe by Delta Homecraft. Built in the 1950s. Runs well. 3 speed, 1/2 HP motor by Rockewell. Perfect for turning bedposts. 816-7031. Location: raleigh it's NOT ok to contact this poster with services or other commercial interests
  6. M

    How many board feet?

    Ok, so the LOML now wants a country hutch. She found one she likes in Fine Woodworking magazine. She mentioned she'd like it in mahogany, so... I'd like to be pretty close board feet if I do it in a wood I have to buy. Would also take suggestions on other species that would look good. I...
  7. sawduster

    Getting my feet wet

    Been a back-and-forth kind've weekend :mrgreen: first a little scrolling, then a little turning, then a little scrolling, then a little turning, then a little turning , then a little turning , then some more turning ....well you get the picture :confused_ Glued and doweled 3 different sized...
  8. MrAudio815

    346,366 Board Feet of Lumber!!!

    Hey Everyone, Just was wondering if anyone out there has seen this auction! Get 667 bf for $150 if that's the winning bid....Wow just wow:elvis: http://www.irsauctions.com/index_lots.asp?pg=details&id=12559 The only thing is, you have to have a flat bed trailer to haul it they will only...
  9. J

    Jumping in With Both Feet

    I'm playing with the idea of building a "Franklin" rocking chair using Lyptus. I don't have a set of plans, but the dimensions are given below so the design will be a seat of the pants exercise. I'm imagining 90 degree standard mortise & tenon joinery for most of the frame (1 3/4 x 1 3/4...
  10. ChrisMathes

    How Long shold my feet be?

    I am making a free-standing 'display' with two legs (think of a free-standing chalkboard or free-standing headboard, etc.). To keep it from falling over, is there some ratio (foot length to display height) I need to follow to make it stable, but without making them so long that they get tripped...
  11. B

    how do you estimate board feet for a project?

    I have a couple projects that I want to build and no idea how to estimate the amount of wood I'm gonna need. Is there a method you guys use to get a good idea how much wood to buy? I have a major gloat coming on October and will need to build a crib and changing table/dresser.
  12. John Reeves

    Bun Feet

    I am looking for some pine bun feet to go under a cabinet I am working on. WW Supply wanted $15 ea. Too much. Any other suggestions?
  13. Adjustable Feet

    Adjustable Feet

    Adjustable feet makes it easy to accommodate uneven floors.
    • KC7CN
    • Media item
    • 64a adjustable feet fold-up outfeed powermatic table tablesaw
    • Comments: 0
    • Album: PowerMatic 64A Outfeed Table
  14. Bryan S

    Board feet Am I figureing this correct?

    In the Sept issue of Wood magazine there are plans for a cradle, and being there's a mom to be and grandmaw to be I thought they would like it. So am I calculating the amount of bf correctly? End panels 2pcs - 16" x 18" = 5 bf side panels 2pcs - 11" x 32" = 6 bf bottem panel 1pcs - 13" x 25" =...
  15. C

    Need Feedback on my feet

    Here's the profile I came up with for the feet. LOML came out to the shop and looked at my first shape and giggled. :-( I softened the edge and this is what I have now. Feet are 8 inch long x 2 1/4 wide. The actual feet will be 1 3/4 thick and the outer surface will be 7/8 proud of the...
  16. Canuck

    Board Feet Calculator

    I recently found this site where you easily calculate board feet. I am a WW'ing novice and no mathematician so I found it helpful. :eusa_danc http://www.cwc.ca/design/tools/calcs/board_feet/ May be of benefit someone else out there. Wayne

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top