dial

  1. merrill77

    Where to buy fractional dial indicator?

    not a caliper, but rather one of these: http://grizzly.com/products/Magnetic-Base-w-Indicator-1-Travel/G9623 with fractional graduations, instead of decimal. And an analog unit, not digital. I've been googling all over and am starting to wonder if they exist? I'm surprised if they don't...
  2. CarvedTones

    power carving - foot pedal versus dial for speed control

    I have a cheap import Foredom knock off hanging motor rotary carver. The foot pedal was basically junk, bet I reshaped the sheet metal so it wouldn't keep coming apart and I insulated it because it was delivering a minor shock at times (yeah, I know you get what you pay for). What makes that...
  3. My Starrett Dial Indicator

    My Starrett Dial Indicator

  4. My Starrett Dial Indicator

    My Starrett Dial Indicator

  5. My Starrett Dial Indicator

    My Starrett Dial Indicator

  6. KC7CN

    Shop-Made Dial Indicator Holder

    Here we go again! From WOOD magazine October 2005. My old Walker-Turner jointer does not have jack screws, so I used the Jointer Pal jig to install the blades. This jig will be used to confirm the blades are adjusted to the correct height. I checked my blade height and found highest point was...
  7. Name & Date Tag

    Name & Date Tag

    A different approach for putting your name on projects. Name and date is printed using computer word processor, on standard paper. Use scissors to cut over-size label. Attach label to double-sided carpet tape. Place transparent tape over front of label. Route 3/8'' shallow slot in project. Trim...
  8. Magnetic Base

    Magnetic Base

    The WOOD plan specified two 3/4'' diameter magnets. Most likely, some magnets are better than others, but two wasn't enough! I used a stack of three 1'' magnets on each end, and two stacks of 3/4'' magnets in the center.
  9. Shop-Made Dial Indicator Holder

    Shop-Made Dial Indicator Holder

    The magazine plan specified #8 wood screw to hold the dial-indicator in place, but it did not work all that well for me. I used a 1/4'' lag bolt with a wing nut instead.
  10. Shop-Made Dial Indicator Holder

    Shop-Made Dial Indicator Holder

    From WOOD magazine October 2005. My old Walker-Turner jointer does not have jack screws, so I used the Jointer Pal jig to install the blades. This jig will be used to confirm the blades are adjusted to the correct height.
  11. J

    HF Dial Indicator / Magnetic Base -$7.99ea

    Title pretty much says it. Either dial indicator, or magnetic base $7.99 through Oct 27th. Picked up two DI's today.
  12. BumoutBob

    6" dial caliper

    For those of you who want a digital dial caliper here is one on sale for $20. www.partsexpress.com
  13. Joe Scharle

    Dial Indicator & Magnetic Base on Sale

    Harbor Freight http://www.harborfreightusa.com/usa/emails/display.do?fname=30_RetailB.html
  14. Tar Heel

    Has anyone used a dial indicator and...

    a magnetic base to align a table saw? If so maybe you can answer a few questions I have about the procedure.
  15. RandyJ

    How do I use a Dial indicator?

    After a long absence, due to health issues, I am back with another newbie question! I just purchased the HF dial indicator and magnetic mount, but really have no idea how to zero, mount, or use it. Does anyone have any instrucions on the use of such a beast? Thanks in advance for any assistance...
  16. F

    HF Dial indicator and magnet base

    Saw the latest HF sales online, that its dial indicator and magnet base is on sale again: and Good for machine setup. HTH. Pinwu
  17. C

    Dial Indicator for General Setup

    I borrowed a friend's dial indicator to check out the tolerances on my new Rikon bandsaw wheel and realized this is a useful tool. The one I used resolved to 0.0001 inches, which seems a bit much for WW setup. I had considered purchasing this from Grizzly...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top