cutting

  1. D

    Cutting boards for food

    I've been making some cutting boards to sell at the NCSU Craft Fair, Saturday, Nov. 19th in the Thompson Building (off Pullen Dr.). All profits will be donated to the Foodbank of Eastern and Central NC, and I've already presold a couple (22 remain), so I've got a good start towards my goal of...
  2. F

    Scraps for a cutting board

    I was just going to order some off that new fangled world wide web, but i figured i could ask here. Would anyone have any walnut/maple (or similar) scraps they would be willing to part with for a modest price? I'm going for a 12x18 sized board :occasion1
  3. golfdad

    Cutting Board ?

    Is soft maple acceptable for a cutting board or does is it have to be hard maple?
  4. rcflyer23

    Question on Cutting Board

    Can you use Soft maple for an end grain cutting board. I know you can use Hard maple but didn't know what the difference was.
  5. G

    Cutting a spline in a long piece of wood

    I am building a patio table and ran into the issue where the 45degree joints at each end of the table just do not seem to have much strength. I was thinking of cutting a spline for the corners but two of the boards are about 87" long and would be hard to hold on a table saw to cut the spline...
  6. C

    miter saw cutting arcs

    I'm so gald to have found this site! I am planning on you guys to solve all the problems in my shop! thanks in advance. My miter saw is cutting slight, but anger-inducing arcs, especially in harder woods. It cuts more from the middle of the wood than it does from the edges (as viewed from...
  7. F

    Cutting angled tenons

    I will be starting a new coffee table soon in which the legs will be canted out from the stretchers at a modest angle (10-15* maybe?). When cutting the M&T joints here, should i angle the mortises when i cut those or should i cut angled tenons to fit square-cut mortises? I honestly don't know...
  8. Bigdog72

    Cutting plywood

    Really not the best way to support your work when cutting plywood. Not me this time although I did trim the side of one of my rollaround cabinets when not paying attention to what I was doing.
  9. Bigdog72

    Panel Cutting Sled

    I need to make a panel cutting sled and, although I know it's easy to make, I am not sure on dimensions. So....post pictures, post details or share plans.....Please!!
  10. End Grain Butcher Block Cutting Boards

    End Grain Butcher Block Cutting Boards

    Maple and Cherry end grain butcher block cutting boards.
  11. striker

    Cutting Board Finish?

    I know this has only been asked a few hundred times here but I can't remember what your supposed to use for cutting board finish. Heck, I've even made and finished a few boards in the past. I know we have a few pros in the ranks so I though I'd throw the question out one more time. My BIL...
  12. B

    Cutting & Installing Bed-rail Hardware

    Have some bed rails to make & match to another bed design. There's no problem duplicating the wood parts, but how do I cut those tiny slots(?) that hold the double hooks that stick out the rail ends, and the equally tiny slots (or mortises?) in the bed posts that have "whatever" hardware...
  13. jarrett

    Advice in cutting up metal/old saws?

    Any one have advice on what I should use to cut up a cheap saw? I have a couple of cheap saws that I originally bought to practice sharpening on. (It's the same one here: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320687265213) I didn't realize what "hardpoint" meant, so I ended up...
  14. scsmith42

    What's the secret to cutting beads?

    Whenever I attempt to cut a 1/4" wide bead using a Crown beading tool, typically when I'm 95% complete the middle portion of the bead will lose a few chunks of wood. Materials that this has occured in include oak, walnut, and sycamore. Obviously it is operator error; what am I doing wrong...
  15. S

    Portable miter saw stand -$50 (Cary/Swift Creek)

    not mine: no name brand listed http://raleigh.craigslist.org/tls/2324632246.html Portable miter saw stand - quit cutting on the ground - $50 (Cary/Swift Creek) Date: 2011-04-14, 11:15AM EDT Reply to: sale-psbnp-2324632246@craigslist.org [Errors when replying to ads?] Portable miter...
  16. duncndonut

    Unedged Flitch Cutting

    Hey, Does anybody know of someone that is selling unedged flitches? It'd be nice if they were in Eastern Carolina, but anywhere in NC/SC would be doable! Thanks folks!:occasion1
  17. Mark Stewart

    Question for you Tree cutting People

    Hi all I was unsure where to puty this so I decided on how to.(move at will) Here is my question. In my neighbor hood I have found this Tree It has that purdy Knot on it that I wish to cut off and I have been told I may do so ifin I can do it with out killing the tree. Is this possible or...
  18. bluedawg76

    my new cutting board

    Here's an end-grain cutting board I recently finished - it's maple, walnut, and purpleheart (the purple doesn't show through that well in the photo). I included a couple of wip photos but there's lots of good writeups from more talented folks on the subject. Final dimensions are ~12x16 and...
  19. DWSmith

    The BoardSMITH Cutting Board Workshop

    The workshop will be held on Saturday April 23 from 8 am until..... The cost will be $150.00 per person limited to 10 people. The fee will include; all materials needed to construct a 12 x 18 maple end grain board, an instruction booklet with photos detailing the process as I do it, lunch...
  20. B

    CL wood cutting

    Found this on Craigslist in Raleigh. Looks like someone just needs some lumber cut to size and will pay for it. http://raleigh.craigslist.org/mat/2214160881.html

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top