cutting

  1. Stuart Kent

    Stuart Kent & Co. fine art & furniture has new ad in Oct. issue of Our State Magazine

    Hi all, I would appreciate help getting the word out about our new ad on page 230, in this month's issue of Our State magazine. Subscribers should already have it and it will show up on news stands in about 10 days. support a small business and help us grow this year so we can reach our goal...
  2. New Cutting Boards

    New Cutting Boards

    Shaped a few cutting boards to resemble surfboards. Built of Mahogany, Cherry, Walnut, Purple Heart and Hard Maple
  3. Marking Gauge Plan

    Marking Gauge Plan

    Marking gauge in walnut and holly. The bar is made from four strips of wood, the blade is an old jigsaw blade. Knob is shop made from a 1/4x20 bolt.
  4. Marking Gauge

    Marking Gauge

    Marking gauge in walnut and holly. The bar is made from four strips of wood, the blade is an old jigsaw blade. Knob is shop made from a 1/4x20 bolt.
  5. Marking Gauge

    Marking Gauge

    Marking gauge in walnut and holly. The bar is made from four strips of wood, the blade is an old jigsaw blade. Knob is shop made from a 1/4x20 bolt.
  6. Cutting / Marking Gauge

    Cutting / Marking Gauge

    Padauk & poplar with hex key blade. The blade slides in and out of the handle with about 2.5" of cutting depth.
  7. Cutting / Marking Gauge

    Cutting / Marking Gauge

    Padauk & poplar with hex key blade. The blade slides in and out of the handle with about 2.5" of cutting depth.
  8. Cutting / Marking Gauge

    Cutting / Marking Gauge

    Padauk & poplar with hex key blade. The blade slides in and out of the handle with about 2.5" of cutting depth.
  9. Cutting / Marking Gauge

    Cutting / Marking Gauge

    Padauk & poplar with hex key blade. The blade slides in and out of the handle with about 2.5" of cutting depth.
  10. Cutting / Marking Gauge

    Cutting / Marking Gauge

    Padauk & poplar with hex key blade. The blade slides in and out of the handle with about 2.5" of cutting depth.
  11. IMG_20130511_172113_614

    IMG_20130511_172113_614

    Cutting board made from 3 types of Maple, Cherry, Red Oak, and African mahogany with Walnut handles.
  12. IMG_20130511_172108_761

    IMG_20130511_172108_761

    Cutting board made from 3 types of Maple, Cherry, Red Oak, and African mahogany with Walnut handles.
  13. IMG_20130511_172049_141

    IMG_20130511_172049_141

    Cutting board made from 3 types of Maple, Cherry, Red Oak, and African mahogany with Walnut handles.
  14. Cutting boards

    Cutting boards

  15. Cutting boards

    Cutting boards

  16. T

    Router jig for cutting bench dog holes?

    Afternoon all, I remember reading an article/watching a video where a guy used a jig of some sort with a router, to get "dead-on spacing/accuracy" for these but for the life of me, cannot seem to remember where or who did it? Anyone here have any experience with such a thing? I am planing to...
  17. erasmussen

    My new tool updated cutting pins

    Here it is my ver. of the pantorouter. Still a few little things I want to change, and add a better router, but it does work. with a dove tail pattern guide mounted
  18. mgoins

    Cutting boards - scroll saw practice

    Happy New Year! Recently my father-in-law was having a barn taken down, and gave me first pick of boards to come down for my lumber stash. The barn stood on the property that he grew up on, and that's been in his family for over 100 years. It was built by his uncle from lumber cut and...
  19. P

    cutting crown on the flat need angles for 10*

    I need to cut crown molding on the flat for angles 10* to the vertical and 808 TO THE HORIZONTAL WITH 90 DEGREES WALL ANGLE help
  20. C

    Cutting Board Finish - Updated with Pictures

    I am working on my first cutting boards for Christmas presents. I have completed three. I put about 4 - 5 coats of mineral oil on each side, about 2 coats per day. Then I put on two coats of 1:6 beeswax/mineral oil. I hand rubbed them in for about 3 - 4 minutes per board per coat. I allowed...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top