5 or 4

  1. bluthart

    5/4 Red Oak For Sale W/Pic

    I have at least 200 BF of beautiful kiln dried 5/4 red oak in 61" lengths. Very flat, straight and clear. Widths from 5" to 11". I am asking $2.00/BF but will discount the whole 200 BF for $350.00. If interested I can provide photos. Thanks for looking.
  2. bluthart

    5/4 Red Oak $1.75 BF - Charlotte

    I have at least 200 BF of beautiful kiln dried 5/4 red oak in 61" lengths. Very flat, straight and clear. Widths from 5" to 11". I am asking $1.75/BF but will discount the whole 200 BF for $300.00.
  3. HMH

    What's my problem? 10"CMS bogging down on 5/4 Cherry.....

    Murphy's Law - I spent some time in the shop this past weekend, for the first time in several. I needed to cut a 45 deg. miter in some 5/4 Cherry stock, so I tilted the blade to 45, and proceeded as usual. When I contacted the wood, i almost immediately smelled the blade burning in, and felt...
  4. bluthart

    5/4 Red Oak and Ash for Sale! Possible wood run!

    I have some real nice 5/4 red oak and ash in 5' lengths. This wood is kiln dried and beautiful, straight, flat with gorgeous grain. I'm asking $2.50 BF and I have approximately 350 BF of oak and 250 BF of ash. I am in Iron Station, NC. Iwould consider bringing this along to Burlington if amyone...
  5. W

    Need 5/4 hard maple

    I need about 20 to 25bf of 5/4 hard maple. I can get 4/4 locally. I called Steve Walls ad found out that I have to order 100bf to be shipped to get the advertised price. To get this small amount will be over $5/bf. Atone know of a source near Shelby,NC? Thanks Wilson
  6. P

    For Sale: Clear 4/4 and 5/4 Banak and 5/4 Mahogany

    For sale in Durham, NC is 4/4 and 5/4 Banak as well as 5/4 Mahogany 5/4 Mahogany is 400 board feet. It is planed on both sides. 5/4 x 5-9'' x 9-10'. 5/4 Banak is 500 board feet. The boards are rough cut. 5/4 x 4-9'' x 13'2''. 4/4 Banak is +/-85 board feet. 4/4 x 4-6'' x 6'...
  7. CrealBilly

    9/4 and 5/4 lumber

    I asked this question here a couple of years ago but would like to ask it again. Since it keeps coming back to my mind. What's your thoughts about 9/4 and 5/4 rough sawn lumber thicknesses? The way I've been thinking about it for a while now, those who like book matched boards could joint a...
  8. kooshball

    Looking for 4/4 or 5/4 rough poplar lumber near Apex

    Need about 40 bdft of 4/4 or 5/4 poplar for drawer sides and dresser carcass bottom preferably near Apex; any ideas? Thanks
  9. T

    5/4 or 6/4 Cypress need to find.

    Kilingspor has 8/4 and I need a strong 1" finished (too much waste from 8/4). It needs to be kiln dried. I am building a screen door for my sister. Anyone knows who has it? Thanks.
  10. Gotcha6

    Looking for 5/4 Ash or Cypress 20' long

    An associate @ work it trying to rebuild a fiberglass canoe. It has wood gunwales on it 18' - 6" long and they need to be curved to fit the canoe. He wants to use Ash or Cypress for weather resistance. I've tried to persuade him to do a laminate glue up but he insists on making this from 1...
  11. S

    4/4 kiln dried oak: $2.50 bf OBO

    I have some excess kiln dried oak that I would like to liquidate. It is 4/4 with widths of 6", 7", and 8". I have quite a bit of the 6" width, and less of the 7" and 8". Most of the boards are 10' long, but some are shorter or longer. Most of the boards are clear and free of defects. Most of it...
  12. PChristy

    4/4 Oak Boards?

    I have had some 4/4 Oak boards under our deck drying since last November that I got from a local saw mill to do some trimming in our kitchen. What would be the best way to be sure that I do not have any problems in the future with it cracking/splitting/moving -etc - I do not have a meter and do...
  13. J

    Looking for 5/4, 6/4, and 8/4

    Cherry, QSRO, FSRO, QSWO. FSWO, and others. I'm just checking to see if our local Sawyers have any KD or AD available. I have alot of 4/4 stockpiled and would like to have some thicker stuff for future use. I know that I can always use Wall or The Hardwood Store, but I will do that at the...
  14. J

    5/4 hickory and ask rough cut

    Looking for someone who stocks both items in the rough as close to Wilmington as I can get. I can get Ash in Elizabethtown but no luck with Hickory yet. Thanks for any help.
  15. M

    5/4 oak and hickory

    A friend of mine told me about this site called irsaucrions.com I went to the site and looked up the auction for Stair Parts inc on the left side of the screen when the site came up I went to the lumber section, listed where 5/4 oak, hickory, cherry, on pallets for 25-50 dollars so if someone is...
  16. Gotcha6

    Need 5/4 x 6" or 8" Ash 22' long

    Anybody know a source for this? An associate @ work wants to know.
  17. R

    Saw to 4/4 or 5/4

    A cousin of mine wants me to saw a couple of hemlock logs for him. He wants the lumber to build something for the new house he is starting to build. I have no idea what he will build out of the lumber but I told him let it dry at least a year. My question is should I saw it at 4/4 or at 5/4...
  18. J

    4/4 5/4 6/4 8/4 Black Walnut $1.80 a BF ad

    Ted informed me tonight We got approx 6000 BF in Black Walnut logs in the yard, He has an estimated 150 more black walnut logs due in the yard in the next few days. What exactly we are going to do with all this black walnut I'm not sure. But he did tell me to sell it. You may want to consider...
  19. J

    So jeff... what is 4/4, 5/4, 6/4 and 8/4?

    I've received a couple of emails from folks who are wondering what I mean by 4/4, 5/4, 6/4 and 8/4 in my lumber forsale threads / ads. There is a straight forward answer but first I would like to speak from experience. Before I got my sawmill I purchased rough sawn lumber for my furniture...
  20. J

    Tuchwud looking for 100 BF 5/4 rough saw Hickory

    I recall Ivey saying he had recently sawn some hickory. Tuchwud (Don) is looking for around 100 BF of 5/4. I have the logs and could saw out 100 BF for him, but figured if one of the sawyers on this site has it already sawed we would be a step ahead of the game. I think Don will take it flat...

Our Sponsors

LATEST FOR SALE LISTINGS

Top