1st

  1. C

    The Fall Donation drive starts September 1st

    I hope everyone will take a moment and read this. Our site is growing. Numbers show that we have 5,640 registered members as of writing this! We have 688 active members. Pretty decent numbers for a 'local' site and growing every day!! You all may remember when you found this site and looked...
  2. Tommy Smith

    1st hollow form

    My 1st attempt at a hollow form. It was a bit of trail and error and the inside could use some work. A catch threw it completely off the lathe toward the end (you can see where it hit the tool rest on the top lip).Claro Walnut 3" high, 7 3/4 wide with the opening 3". This and all my turnings so...
  3. A

    Bad 1st experience at wood store

    I want to build some outdoor furniture for my wife. I recently went to a hardwood store to find some cypress or cedar and was stunned at the cost. Granted I am new to wood working and this was my first venture into the world of specialty wood stores. I, until now, have bought all my wood at...
  4. Tommy Smith

    1st Lidded box

    I'v been watching a guy online demonstrate his lidded boxes and decided to go ahead and give a try..so far I only have this one made from AM.. http://i169.photobucket.com/albums/u233/1vulcan/DSCN2543.jpg http://i169.photobucket.com/albums/u233/1vulcan/DSCN2544.jpg...
  5. gesiak

    1st Bowl

    This is the first successful bowl turning. Turned this Saturday at a local workshop. Found out that it is far easier if you have the correct tools....... It is made from spalted birch. Thanks for looking!
  6. boxxmaker

    1st Antler Pen

    This is my 1st antler pen,it's for a good friend of ours that gave me the rack and all she wanted from it was a pen and a knife . It was fun to make :gar-Bi
  7. C

    1st photo post

    If this works it will only because of the help Bas offers! View image in gallery View image in gallery
  8. boxxmaker

    My 1st pens

    Well I finally took the plunge and got started in making pens this week.Only took three yrs after the misses got me my starter kit.Can't remember the woods I used.I made two display racks out of Bacoti and mah.Now all I have ta do is figure out how to stop,there fun ta make.:gar-Bi
  9. S

    1st Project of Year: New Style Workbench

    As I do every year around this time, when it's too cold to spend any length of time in shop, I take an inventory of tools that did not make the grade (just didn't get enough use out of). They get Craiglisted (receipts gladly given :gar-Bi). Then use money to get new :tool:'s One item not...
  10. Canuck

    Grand Daughter's 1ST B'Day Present

    Well as all of my projects seem to do, they create some frustrations and teach me a lot but in the end everything ends up being ok by my standards in hopes that they will last a little while. I started by getting some awfully nice QSRO from Scott Smith back in early December. Being a real...
  11. kave

    My 1st project as a ncwoodworker

    Okay, I told you as was a rookie when I joined this site. Now I'll prove it. I just completed a paper clip/alligator tray for my office desk. The 1st picture was the inspiration for the project (hid it in my desk drawer but it was functional). The bottom was installed in the dado I cut in the...
  12. B

    New and 1st shop!

    After about two months of very hard work, ~ 75% by myself, I am ready to pour the concrete for my first workshop and/or man cave. I've been wanting to post for quite a while, but wanted to wait until I had something more substantive to show. Here you go! floorplan layout: View image in...
  13. 3D rendering of the shop

    3D rendering of the shop

  14. Floor plan

    Floor plan

  15. IMG_07513

    IMG_07513

  16. wrapped and ready to go!

    wrapped and ready to go!

  17. that's gonna be quite the footer

    that's gonna be quite the footer

  18. IMG_07201

    IMG_07201

  19. finally on to the plumbing!

    finally on to the plumbing!

  20. digging the footer

    digging the footer

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top