white

  1. Next stage of ebonizing experiments on White Oak

    Next stage of ebonizing experiments on White Oak

    Using info to do better ebonizing experiments
  2. Next stage of ebonizing experiments on White Oak

    Next stage of ebonizing experiments on White Oak

    Using info to do better ebonizing experiments
  3. Next stage of ebonizing experiments on White Oak

    Next stage of ebonizing experiments on White Oak

    Using info to do better ebonizing experiments
  4. Ray Smith's white oak

    Ray Smith's white oak

    13'6" circumference white oak that I will be milling this summer.
  5. White Oak Test of Vinegar/Steel Ebonizing Solution

    White Oak Test of Vinegar/Steel Ebonizing Solution

    My 1st attempt
  6. Shayne

    Ral CL: 4/4 Mahogany, Walnut, Cherry, QS White Oak Lumber

    Not mine http://raleigh.craigslist.org/mat/1194086335.html
  7. jaustin

    Cypress or white cedar?

    What is a average price 4/4 Cypress or white cedar? Thinking about building Adirondack chairs
  8. E

    Cypress or White Cedar Log

    I have an order for 260 fan birds (see picture below). So, I am in need of a clear section of cypress or white cedar (not red cedar). It needs to have been cut within the last couple months, be at least 8" in diameter and be from part of the trunk. I'm willing to pay for it and to drive a...
  9. BrianGeib

    White Oak / Black Walnut - Raleigh CL

    Rough Lumber White Oak and Black Walnut - $1 (Efland) Reply to: sale-xnggr-1103264157@craigslist.org [Errors when replying to ads?] Date: 2009-04-02, 1:15AM EDT Rough 4/4 white oak - 10 ft long. Lots of it. Various widths many over 12". Also 3/4 Black Walnut All drying for 2 years +...
  10. Woodchuck

    Gandalf, The White

    I was just surfing the internet and ran across a photo of this guy and thought he would be fun to carve. He is Garndalf, The White from the movie Lord of the Rings. This is my version of what he looks like. Thanks for looking and as always, comments and suggestions are appreciated. Chuck
  11. N

    Wanted White Oak

    Hope everyone enjoyed the holidays. I need some air dried white oak around 15-18%. I just need a about 20bf 4/4 rough or 3/4". This for an experiment in my other hobby winemaking.
  12. owen299

    White Oak Burl Dish

    Turned this dish out a thin Burl I got from a friend in Western New York. It was extremly hard but really nice inside. Enlarge the first pic...it's worth it
  13. redhawknc1

    SYP and white pine T&G finishing suggestions....

    Well, got my shop wired finally. At least the main panel. Have outlets for my 8" 220V PJ882 jointer on a separate circuit. Outlet for my 5hp PM209 installed on a separate 30amp. A separate 20 amp circuit for 110V. Will run extra outlets as I remodel. Now, starting to remodel (as a shop...
  14. owen299

    White Oak Burls / Bowls

    WOW... You cannot believe how hard these were. The burls were cut by a friend in NY a couple years ago . I had a chance to pick them up earlier this summer. Both are White Oak but are very different.
  15. skysharks

    A Pile of White Oak and Extra Time

    Hey folks just thought that I would share a couple of new projects with you. But the wife wasn't satisfied with just these soOOOOOOOO . If you look close the charis are out of White oak and the table out of Red. I think they look ok uh??? Finished with 2 coats of outdoor Spar urethane...
  16. White Oak Adirondack

    White Oak Adirondack

    My first chair, finished imCabot Helmsman.
  17. T

    Touch-up paint needed (Grizzly green & white)

    Just in case any one has some sitting around not being used. I can order it from Griz if needed.
  18. L

    White Paint

    I have built an end table that I want to paint white and would like some suggestions on what type paint would be good and how to apply, etc.
  19. quid_non

    Need ~70bf White Oak

    Hi all! Looking for a fair price (prefer to support local sawyers if possible) on dry White oak for an outdoor glider project: 8/4 30bf 5/4 15 bf 4/4 25 bf I can pick up. If anyone can supply, please respond here or send PM. Thanks! Wayne
  20. adowden

    Finished White Oak Storage Bed

    This is a white oak storage bed that I finished in mid-December. It took me so long to post because I have never linked a photo instead of attaching it. I really enjoyed this project. It wasn't hard - just really big. This bed was made for a 13 yr. old boy who is 6'3". He needed a XL twin...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top