surface

  1. Mr. Bill

    Surface! Surface,! Surface!

    Added the submarine to my grandson's pier bed! Doesn't look much like the six I served on but he's enjoying it; expecially the pictures behind the portholes! Can't figure out how to get the pic from my gallery?
  2. D

    Gluing to a painted surface?

    I have some small wood letters that I need to attached a painted wood surface and was wondering about the best method to do so. Would basic wood glue work? The letters are too small (thin) for any type of nail, so glue would be my only option right? Dave
  3. H

    Hardening the surface of wood?

    Now I'm not looking for a miracle here, just curious if there is anything out there that can harden the surface of yellow pine (even if just a little bit) without applying a film finish. I am using glued pine (its what I have on hand) for an outfeed table that will occasionally see double use...
    • hockey1
    • Thread
    • hardening surface wood
    • Replies: 11
    • Forum: Wood
  4. kooshball

    Surface rust on table saw

    I have some "top saver" that I have been using on my tools but am not happy with it; I can develop surface rust on my table saw within a day or two of applying this treatment. I read an old thread on this site and am now sold on the Boeshield product but would like recommendations on the...
  5. flyrod444

    New surface for my pot calls

    I put together a ceramic call this week and it sounds and looks great. I wll be making many calls using the ceramic surface. It plays as easy as slate with just a touch higher pitch and is very loud if need be. I put this one in a rhododendron burl / purple heart pot that looks great. I have...
  6. N

    Homebuilt case for surface plate?

    Anyone have ideas on building a carrying/storage case for a granite surface plate? Woodcraft had them on sale so I got one. We'll see if it helps with sharpening. The problem is that it's big (2x9x12) and HEAVY! I haven't weighed it but the Woodcraft guy seemed to think it was 20 lbs or so...
  7. S

    **Wanted**Someone with a 12" Surface Planer*** - $1 (wake forest)

    Not me/mine!~ possible oppurtinity to get a "return" on your planer! http://raleigh.craigslist.org/tls/1583292810.html **Wanted**Someone with a 12" Surface Planer*** - $1 (wake forest) Date: 2010-02-02, 8:14PM EST Reply to: sale-cqc2t-1583292810@craigslist.org [Errors when replying to...
  8. pbaileyjr

    surface rust

    I would like suggestions on how to prevent or slow the accumulation of surface rust on my equipment, ie jointer, bandsaw, table saw, etc. My shop is my garage, unheated and uninsulated. I've used paste wax a number of times on the unpainted surfaces but it only protects for a week or so, even if...
  9. CarvedTones

    I need help with final surface and finish on bowls

    I stopped work on that pretty bowl I posted because I was doing as much damage as good trying to get the surface right. It joins a couple of other smaller ones at the same stage. Anyone around Raliegh/Cary willing to do a little hands on coaching? I have read and watched but something is not...
  10. S

    Nice work surface for someone who has room

    10', black laminate http://charlotte.craigslist.org/mat/1481251689.html
  11. Cabinet

    Cabinet

    Example of an item a friend would like to acquire
    • nblong
    • Media item
    • drawers shallow surface tilted work
    • Comments: 0
    • Category: Furniture Projects
  12. William Roscoe

    Solid Surface Countertops Materials

    I've been trying to find a place that will sell this to a non-certified contractor and in the cental part of the state. I was thinking there were some generic products that were sold to the public.:dontknow::icon_scra
  13. William Roscoe

    Solid Surface Material Location

    I'm wanting to replace my kitchen countertops with corian or something similar and was looking for a place near by that will sell this stuff to non-pro's. I've found places on line but the shipping was very high. Any ideas?
  14. L

    Looking for smooth surface on oak

    Could someone tell me how to go about finishing an oak project so the grain is filled in and smooth to the touch? Lorraine
  15. W

    Water Based Poly over Dyed Surface?

    I just dyed the surface of a TV Stand. I intend to apply water based ploy afterward. My question: Do I need to apply a sealer coat in between? Will the water based poly smear the water soluble dye? Thanks for any help. Qui
    • Woodsaw
    • Thread
    • based dyed poly surface water
    • Replies: 13
    • Forum: Finishing
  16. rick7938

    Surface Oxidation on Wood Species

    I have three small projects going now that involve SYP, red oak, and poplar. I know that the SYP will oxidize and lend some nice color to the wood before finishing, but have not noticed the effects of sunshine on red oad and poplar. The pieces are already sanded to their final finish so I won't...
    • rick7938
    • Thread
    • oxidation species surface wood
    • Replies: 2
    • Forum: Finishing
  17. Vanilla Gorilla

    Need some advice on surface defects

    I have a couple of boards which I am not sure what species they are. I am guessing either Walnut or very old cedar. I threw some mineral spirits on them and took a picture: These boards have a lot of surface checks, knots, and wormholes, but the checks are by far what I am most concerned...
  18. John Reeves

    Finish for workbench surface

    I have just completed my workbench. The top is laminated Red Oak and Maple (that I piscked up a different saw mills as scrap). 3'X6" and 2 1/4" thick. It is on a cabinet I made out of Red Oak and Maple as well. What finish should I use on the top surface? I used Tung oil for the cabinet...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top