Scott Smith, called me tonight to remind me I have a little over 500 Board Foot of 4/4 Quarter Sawn Red Oak out at his place. I sawed this Red Oak last winter form a few nice butt logs before I took my saw mill to my father in law in southern Illinois. I vaguely remember taking the lumber to...
Hi All,
I turn long thin spindles for making flutes(25 to 30 " long with 7/8 , 3/4 or 1 " bores)....I dont have a modern lathe but an older Craftsman with the tubular bed. I basically take 2 pieces of stock and rout half the bore of the flute in each and glue these together. Then I...
Hello folks - time to clean out my lumber room again. I will be traveling to the Raleigh area on June 13th. At this point I plan on going as far as Burlington, exit 157 Buckhorn Rd. If I get more of a response from the Raleigh area I will consider going farther east. Here is some of what I have...
It now looks like I may be driving towards the Raleigh area, probably around Burlington (maybe the truckstop on Buckhorn Rd (Exit 157)
I will list more wood that I will have available and will have smaller quantities available. Please PM me with any wood that you may be interested in. I will...
Ivey is heading up to my farm this Friday, and he has room on the trailer for some of his prized cypress and poplar. He can leave it at my farm for pickup by North Carolina Woodworker members either on Friday, over the Memorial Day weekend, or next week.
I will be glad to hold your order here...
Snagged one of those old belt drive grinding mandrels with the oil cups and bronze(?) bearings.
I have a 1725 rpm motor and want to figure out what speed these things will handle. Primarily going to use it for wire wheel and buffing work while cleaning up tools.
The wire wheels I get go to 4500...
I sprayed a dresser the other day and didnt notice until the shellac was dry that i have a couple of runs/sags.
I know I can use DNA to fix this, but is it better to just concentrate on the area of the run or should i do a larger area?
Should I go back and respray just the affected area or...
Spent a few hours this weekend to get a few last minute Christmas gifts for my co-workers. These are pencil holders and business card holders. Nothing fancy, but I hope they'll be well received.
The wood used is curly maple, quarter-sawn walnut, claro walnut, bubinga, and sapele. The finish...
We are going to coordinate a little something many woodworkers like.... wood!
Working with a few of our Wood Dealers to get some nifty lumber into your hands after the Crawl.
The plan is at ~4:30pm, after we finish touring Amy's Shop, we'll take to the trucks and pick up some wood.
Over...
I can bring along some Sapele or wormy maple on the crawl this Saturday - PM me if interested. I will also be traveling to Raleigh / Chapel Hill Sunday Sept. 20th to deliver some Sapele. I will have some 6/4 and 4/4 on the trailer. Please PM me if interested. Thanks.
With Jeremy's permission, I figured I would offer and bring along some lumber to sell again this year. I have a bunch of 4/4 poplar I wouldn't mind sharing, in 61" lengths, kiln dried. I also have a bunch of wormy maple as posted in the classifieds. I would be willing to split up these...
Should have used something else - The wood for the bowl is from Hawaii I will have to go back out to the shop later and get the name because I forgot it that quick:BangHead: It is a hard wood :swoon: Thought I would try a Cherry top - It is hard too:swoon: The Cherry was free and I doubt that I...
Based on the overwhelming desire of many to both eat and try to score TNBTG (The Next Big Tool Gloat).....
Announcing, the one, the only, fresh from the mighty Eno River, its the RTP Lunch Bunch!
Date: Thursday, August 20th 2009
Time:
11:30 to 12:30 Lunch
12:30 to 1:30 Re-Store...
I am making my daughter a cherry chest and I need 5 glued up panels run through a drum sander.
These are 18 inchs wide made of kiln dried cherry and are a bit too much for me to sand down with an orbital sander.
I am new to the area and don't know where I can go to get this type of service, so...
As most all of us know by now, as of July 1, Steve Coles has turned over to the Board of Directors the responsibility of running the corporation which includes this website. Steve has made a significant financial contribution each year since the inception of North Carolina Woodworker. With the...
http://raleigh.craigslist.org/tls/1246545237.html
Reply to: sale-n9whu-1246545237@craigslist.org [Errors when replying to ads?]
Date: 2009-06-30, 5:15AM EDT
Leigh D4 jig with router bits.
Location: North Raleigh
it's NOT ok to contact this poster with services or other commercial...